Water Jacketed CO2 Incubator LWJI-T2020

Introduction

Water Jacketed CO2 Incubator operates within a CO2 range of 0 to 20% ± with control accuracy of 0.1%. It offers storage capacity of 80L with 2 perforated shelves, supporting up to 10 maximum shelf positions. Upon door opening, systems automatically turn off the heating, fan and CO2 intake valve to prevent contamination. Equipped with leakage protection and a spare mechanical thermostat ensuring smooth operation. Widely used for microorganism culture, tissue culture and pharmaceutical research in biotechnology, chemical labs.

It provides a stable and controlled environment for cell culture, microbial growth, and other biological experiments. The precise temperature and humidity control ensure consistent experimental conditions and reliable results.

Applications

Our Water Jacketed CO2 Incubator are ideal for culturing bacteria and microorganisms, tissue culture, and pharmaceutical research in biotechnology, chemical labs, and research institutions.

Specifications

Chamber Volume	80L
Temperature Range	RT+5 to 60℃
Temperature Stability	Less than or equal to ±0.2℃
Temperature Uniformity	Less than or equal to ±0.3℃
CO2 Range	0 to 20%
CO2 Control Accuracy	± 0.1% (Imported sensor)
Operating Temp.	+18 to 30℃
Humidity Method	Natural Vaporization
Power Consumption	600W
Power Supply	AC220V,50HZ
Chamber Size (W×D×H)	410mm × 440mm × 510mm
Exterior Size	560mm × 640mm × 900mm
Weight	130Kg

Features

Forced air convection

Stainless-steel duct chamber 

Infrared CO₂ sensor

Microprocessor controller 

Touch screen Interface

FAQs

1. How to calibrate the temperature and humidity controls in the laboratory incubator?

Calibration should be performed by qualified personnel using calibrated temperature and humidity sensors: 1) Place the calibrated sensors at different locations inside the incubator chamber to ensure uniform distribution; 2) Set the incubator to the desired temperature and humidity levels and allow it to stabilize for at least 24 hours; 3) Compare the readings from the incubator's display with the calibrated sensors; 4) Adjust the controls according to the manufacturer's instructions if discrepancies are found; 5) Document the calibration results and schedule regular recalibration (every 6-12 months).

2. What is the optimal way to arrange samples inside the incubator for uniform conditions?

To ensure uniform conditions: 1) Avoid overcrowding the incubator, leaving sufficient space between samples for air circulation; 2) Place samples away from the chamber walls, heating/cooling elements, and door to prevent temperature fluctuations; 3) Use shelves or racks that allow air to circulate freely around all samples; 4) Avoid placing large or heat-generating equipment inside the incubator; 5) Rotate samples periodically if long-term incubation is required to account for any minor temperature variations.

3. Can the incubator be used for anaerobic or CO2-enriched environments?

Specialized incubators (anaerobic incubators, CO2 incubators) are designed for these environments. Standard incubators may not maintain the required gas concentrations or oxygen-free conditions. For anaerobic applications, use an incubator equipped with a gas control system that maintains oxygen levels below 1% and may include catalysts to remove oxygen. For CO2-enriched environments, use a CO2 incubator that maintains precise CO2 concentrations (typically 5-10%) and humidity levels, essential for cell culture applications.

4. How to clean and disinfect the incubator to prevent contamination?

Regular cleaning and disinfection steps: 1) Turn off the incubator and allow it to cool down to room temperature; 2) Remove all samples and shelves; 3) Wipe the interior surfaces with a mild detergent solution, followed by a disinfectant compatible with the incubator materials (such as 70% ethanol); 4) For stubborn contamination, use a specialized laboratory disinfectant according to the manufacturer's instructions; 5) Clean the shelves and any accessories separately; 6) Allow all surfaces to dry completely before reassembling and restarting the incubator; 7) Perform this procedure monthly or more frequently if contamination is suspected.

5. What should be done if the incubator temperature fluctuates significantly?

If temperature fluctuations occur: 1) Check if the incubator door is properly closed and sealed; 2) Ensure the incubator is not placed near heat sources, air conditioning vents, or drafty areas; 3) Verify that the incubator is not overloaded, which can restrict air circulation; 4) Check the air filter (if equipped) and replace it if dirty; 5) Inspect the heating and cooling elements for proper operation; 6) If the problem persists, contact technical support for further diagnosis and repair, as it may indicate a malfunction in the temperature control system.

1. What are the primary uses of Water Jacketed CO2 Incubator ?

Water Jacketed CO2 Incubator are ideal for culturing bacteria and microorganisms, tissue culture, and pharmaceutical research in biotechnology, chemical labs, and research institutions. It is widely used in modern medicine, biology, chemistry, and agriculture science for the culture of biological cells, tissues, and bacteria.

2. How is the CO2 concentration controlled in the Water Jacketed CO2 Incubator ?

Water Jacketed CO2 Incubator uses an imported infrared CO2 sensor and gold-plated probes for accurate and long-lasting CO2 measurement. It employs control technology to maintain the CO2 concentration, which can be freely set within a range of 0% to 20%. It has an alarm function for over-concentration and if the concentration rises too slowly.

3. What safety features does the Water Jacketed CO2 Incubator provides?

The Water Jacketed CO2 Incubator includes an alarm function for over-heating, lack of water (for water jacket models), and unaspirated conditions. It also features leakage protection and a spare mechanical thermostat to ensure continued operation even if the main temperature control fails. Upon door opening, systems automatically turn off the heating, fan and CO2 intake valve. This reduces contamination from ambient air entry.

4. What optional features are available for the Water Jacketed CO2 Incubator ?

Water Jacketed CO2 Incubator has optional features which includes a pressure reducing regulator valve, a filter system and high-temperature sterilization. The incubator is equipped with UV sterilization to control contamination. It also offers storage capacity of 80L with 2 perforated shelves, supporting up to 10 maximum shelf positions.