Portable PH Meters LPRPM-T2010

Introduction

Portable pH Meter a pH measuring range of 2.00 to 19.99 pH, enabling precise monitoring of both acidic and alkaline solutions. The device has an mode, conserving battery life by shutting down the device after a period of inactivity. Our portable pH meter has an IP57 waterproof rating, minimizing the risk of electrical hazards in damp conditions.

This ph meter is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Portable pH Meter  measures the acidity or alkalinity (pH) of aqueous solutions. It is widely utilized in wastewater treatment, environmental research, agriculture, and chemical industries for monitoring pH levels.

Specifications

pH Measuring Range	2.00 to19.99 pH
pH Resolution	0.01pH
pH Accuracy	± 0.01 pH
Stability	± 0.01 pH / 3h
Temp. compensation range	0°C to 100°C
Power Supply	2 AA Batteries 15 V
Meter Size	120mm × 65mm × 31mm
Package Dimension	360mm × 270 mm × 76 mm
Material Weight	180 g
Package Weight	1.6 kg

Features

Microprocessor Control System

Automatic Calibration Function

 Low Voltage Indicator

 Buffer Solution Recognition

 High Purity Mode

FAQs

1. How do portable pH meters handle measurements in low ionic strength or contaminated samples?

portable pH meters equipped with high-impedance input circuits are designed to measure low ionic strength samples accurately by minimizing current leakage and signal loss. Specialized electrodes with low junction potentials improve stability and response time in dilute or ultrapure water. Contaminated samples may cause junction clogging or drift; hence, electrodes with rugged junction designs or double junctions are preferred to resist fouling. Frequent calibration and cleaning are critical to maintain accuracy. Some advanced portable meters include diagnostic features that alert users to electrode problems. Together, these design choices and maintenance routines ensure reliable readings in challenging sample conditions.

2. How should user calibrate portable pH meter for optimal accuracy?

It supplies advanced models of portable pH meters. To ensure precise measurements, calibrate your portable pH meter using at least two fresh, uncontaminated buffer solutions that bracket your expected sample pH range. Begin calibration with a neutral pH 7.00 buffer, followed by acidic (pH 4.00) or alkaline (pH 10.00) buffers, depending on your sample's characteristics. Always rinse the electrode with distilled or deionized water between buffer solutions to prevent cross-contamination. Allow the electrode to stabilize in each buffer before confirming calibration. If the meter has automatic temperature compensation (), ensure it is functioning correctly, as temperature variations can affect pH readings. Regular calibration, ideally before each measurement session, compensates for electrode drift and ensures reliable results. Consult your meter's manual for specific calibration procedures and recommended buffer solutions.

3. How can user store portable pH meter when not in use?

Proper storage is essential to maintain the accuracy and longevity of your portable pH meter. Always store the electrode in a moist environment to prevent the glass bulb from drying out, which can lead to inaccurate readings. Use a protective cap filled with a suitable storage solution, such as a 3.33M potassium chloride (KCl) solution, to keep the electrode hydrated. Avoid storing the electrode in distilled or deionized water, as this can cause the reference electrolyte to leach out, compromising performance. For long-term storage, place the meter upright in a container with the electrode tip submerged in the storage solution. Regularly check the storage solution level and top it up as needed to ensure consistent hydration. By following these storage practices, you can extend the lifespan of your pH meter and ensure reliable measurements.

4. Can the portable pH meter for testing high-temperature samples?

Portable pH meters are generally designed for use with samples within a specific temperature range, typically 0°C to 50°C. Testing high-temperature samples can damage the electrode and affect the accuracy of readings. Some models may have temperature compensation features, but they are not intended for use with samples exceeding their specified temperature limits. For high-temperature applications, consider using specialized pH meters designed to withstand elevated temperatures. Always consult the manufacturer's specifications to ensure the meter's suitability for your specific testing conditions. Using the meter within its recommended temperature range ensures accurate and reliable results.

5. How can user replace the electrode in my portable pH meter?

It supplies premium portable pH meter. Replacing the electrode in a portable pH meter is straightforward. Begin by removing the protective cap and unscrewing the plastic ring at the top of the electrode. Gently pull out the old electrode and replace it with a new one, ensuring that the gaskets are properly seated. Screw the ring back into place securely. It's essential to handle the electrode carefully to avoid damage. Always use a compatible replacement electrode recommended by the manufacturer. After replacement, recalibrate the meter to ensure accurate readings. Regular electrode replacement maintains the meter's performance and reliability.