Xenon Test Chamber LXC-T2022

Introduction

Xenon Test Chamber is a spacious 408L chamber that works in a temperature range of 10℃ to 80℃. It utilizes an imported air-cooled full solar spectrum long arc xenon lamp as the light source. A water spray function is available to simulate the effects of outdoor moisture on materials. Our test chamber Integrates a high-quality xenon arc tube for consistent performance. Offers quick and easy lamp replacement with durable filters to maintain the required spectrum. This test equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our Xenon Test Chamber is suitable for tests such as selecting new materials, improving existing materials, or evaluating changes in durability due to material composition changes. Applicable materials include plastics, rubber, paints, ink, paper, pharmaceuticals, food, cosmetics, textiles, auto parts, packaging materials, construction materials, and electrical products.

Specifications

Capacity	408L
Temperature range	10℃ to 80℃
Temperature deviation	± 2℃
Humidity range	65 to 98％R.H
Display	5.7-inch screen
Humidity deviation	group: 3 zones Deviation : 1 Zone
Storage Program	120 Group / 1200 segment
Control	± 2.5%R.H (humidity ≥ 75%R.H) ±3%R.H (humidity ≤ 75%R.H)
Input Control	Universal input 1 point, 0.1% of FS
Output Control	2 points (heating, cooling)
Light source wavelength range	290 to 800nm
xenon lamp service life	1500 hours
Xenon lamp quantity	2 pieces
Xenon lamp power	1.8KW
Rain time	1 to 9999 minutes
Rain cycle	1 to 240 minutes
Spectral wavelength	290nm to 800nm
Heating power	4.6KW
Humidification power	3KW
Light source irradiance	Full spectrum 100 to 800w/m²
Irradiation area	5500cm²
arc center to sample holder Distance	35 to 380mm
Water spray time	0 to 9999h
Stop spraying time	0 to 9999h
Blackboard temperature	63℃ to 100℃ (deviation±3℃)
Environmental temperature	26 ℃
Environmental humidity	≤ 85% R.H
Cooling method	Mechanical cooling and air cooling
Total power	about 8.5KW
power supply	380V±10% 50HZ
Inner Dimension (D×W×H)	800 × 600 × 850 mm
Exterior Dimension (W×D×H)	1350 × 1200 × 1850mm
Weight	350 Kg

Features

Illumination time can be programmed continuously

Multiple Filter Systems Available

Relative Humidity Control function

Air Temperature Control System

Irregularly Shaped Sample Holder

Minimal routine maintenance required

FAQs

1. What are the key factors to consider when selecting this test equipment for laboratory use?

When selecting this test equipment, key factors include: 1) The instrument's precision and accuracy to meet experimental requirements; 2) Compatibility with the types of samples and applications you will be working with; 3) Ease of use and maintenance requirements; 4) Safety features to protect operators and samples; 5) Calibration and certification requirements; 6) Cost-effectiveness and long-term reliability; 7) Technical support and service availability from the supplier. Evaluating these factors ensures that the instrument meets your laboratory's specific needs.

2. How often should this test equipment be calibrated to ensure accurate results?

It is recommended to calibrate this test equipment at least once every 6-12 months under normal usage conditions. More frequent calibration (every 3-6 months) may be necessary if: 1) The instrument is used continuously for extended periods; 2) It is exposed to harsh environmental conditions (temperature fluctuations, humidity, dust); 3) It is used for critical applications requiring high precision; 4) The instrument has been moved or subjected to physical shock; 5) Calibration checks indicate significant deviations from standard values. Always follow the manufacturer's calibration guidelines.

3. What are the common maintenance procedures required for this test equipment?

Common maintenance procedures include: 1) Regular cleaning of the instrument's exterior and sample contact surfaces to prevent contamination and ensure proper operation; 2) Inspection of moving parts (if applicable) for wear and lubrication as recommended by the manufacturer; 3) Replacement of consumable parts (filters, bulbs, reagents) according to usage guidelines; 4) Verification of performance parameters (temperature, pressure, voltage) regularly; 5) Storage of the instrument in a clean, dry environment when not in use; 6) Keeping a maintenance log to track service activities and identify potential issues early; 7) Following the manufacturer's specific maintenance schedule for optimal performance and longevity.

4. Can this test equipment be used with different types of samples, and are there any compatibility considerations?

Yes, this test equipment can be used with a variety of sample types, but compatibility considerations are important: 1) Check if the instrument's materials are compatible with the chemical composition of your samples (avoid corrosive or reactive substances that may damage the instrument); 2) Ensure that the sample volume and concentration are within the instrument's recommended range; 3) For biological samples, consider sterility requirements and potential cross-contamination risks; 4) For volatile or hazardous samples, ensure proper ventilation and safety precautions are in place; 5) Consult the manufacturer's documentation for specific sample compatibility guidelines, and perform compatibility tests with new sample types before regular use.

5. What should be done if the test equipment malfunctions or produces inconsistent results?

If malfunctions or inconsistent results occur: 1) First, check the instrument's user manual for troubleshooting guidelines specific to the issue; 2) Verify that the instrument is properly calibrated and within its calibration period; 3) Inspect for obvious issues such as loose connections, damaged parts, or incorrect settings; 4) Clean the instrument thoroughly to remove any contamination that may affect results; 5) Repeat the experiment with a known standard sample to determine if the issue is with the instrument or the sample; 6) If the problem persists, discontinue use of the instrument to prevent further damage or inaccurate results; 7) Contact technical support or a qualified service technician for diagnosis and repair, providing details of the issue and any troubleshooting steps already performed.