Benchtop Ion Meter For S, LBIM-T2024

Introduction

Benchtop Ion meter for S, comes with (S) sulphide ion selective electrode for sulphide ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

This water testing equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Benchtop Ion meter is used to measure the sulphide ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Specifications

Ion measurement range	S range: 1×107 - 1M, 0.003-32100 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	communication interface
Connector
Display	(130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Features

Large display

2 - 5 points calibration from low to high concentration

Direct ion concentration readout for elaborate measurement process

Selectable concentration units from ppm, mg / L, mol / L

mV measurements to check the performance of ion selective electrode

Temperature compensation provides accurate reading over the entire range

Stability indicator to show current measurement status

Calibration due reminder for regular calibration of the meter

Auto hold function to freeze stable reading for better viewing & recording

Automatic electrode diagnosis shows the slope of the sensor

Reset setting function

Expanded memory stores and recalls up to 500 readings

Built –in real time clock stamps

communication interface to transfer stored data to PC

FAQs

1. What types of water testing applications is the It Benchtop Ion meter for S, most suited for?

It Benchtop Ion meter for S is ideal for analyzing sulphide ion concentrations in potable water, deionized water, wastewater, and natural water bodies. It is useful in industries like environmental monitoring, wastewater treatment, and chemical manufacturing, where sulphide levels must be regularly tracked. The meter has a wide detection range from 0.003 to 32,100 ppm, allowing both trace-level detection and high-concentration measurements. This makes it a versatile ion meter for routine lab testing and environmental compliance checks.

2. How does the Benchtop Ion meter for S ensure accurate sulphide measurements over time?

The Benchtop Ion meter for S features 2 to 5-point calibration with a variety of standard solutions to maintain high measurement accuracy. It also includes a calibration due reminder that alerts users when recalibration is needed, helping maintain consistent performance. These features are essential for long-term reliability, especially in labs with high testing frequency. The meter’s accuracy of ±1% F.S. supports dependable results throughout repeated use.

3. What makes the Benchtop Ion meter for S convenient for frequent laboratory or field use?

Benchtop Ion meter for S's compact design, user-friendly interface, and large screen make it easy to operate in various work settings. Users can quickly switch between concentration units (ppm, mg/L, mol/L) depending on their testing requirements. The meter's manual or automatic endpoint detection helps users capture stable results with minimal effort. These usability features reduce operator fatigue and speed up testing workflows.

4. How can users check the condition and effectiveness of the sulphide ion selective electrode of Benchtop Ion meter for S?

The Benchtop Ion meter for S includes a mV measurement mode to verify the electrode’s performance by checking its response potential. It also has an automatic electrode diagnosis function that displays the sensor slope, indicating how well the electrode is functioning. This allows users to detect electrode degradation early and take corrective actions. These built-in checks help avoid inaccurate readings and extend electrode life.

5. How does the Benchtop Ion meter for S support safe and secure data handling?

Benchtop Ion meter for S with storage of up to 500 readings and a real-time clock for timestamping, users can keep a reliable digital log of all measurements. The output allows easy transfer of data to a PC, ensuring results are backed up and available for reporting or audit purposes. This is especially important in research and regulatory environments where data traceability is critical. It minimizes the risk of data loss due to manual entry errors or device shutdowns.

6. How does the temperature compensation feature of Benchtop Ion meter for S contribute to accurate sulphide ion readings?

The Benchtop Ion meter for S includes both automatic and manual compensation modes across a wide range (0 to 100 °C). This ensures that the final concentration values are corrected for thermal effects, which is crucial when working with samples from various environments. The temperature probe provides precise real-time temperature input for more accurate compensation. This feature helps maintain data integrity, especially in fluctuating lab or field conditions.

7. What safety and power-saving features of Benchtop Ion meter for S?

Benchtop Ion meter for S offers manual and automatic power-off settings in 10, 20, or 30 minutes to help conserve energy and reduce the chance of overheating. This is useful in labs where equipment may be left unattended. It also has a reset function to quickly return to default settings if needed, preventing errors from incorrect configurations. These safety features promote responsible equipment use and long-term durability.