Benchtop Ion Meter For NH3 , LBIM-T2020

Introduction

Benchtop Ion meter for NH₃ , comes with (NH₃ ) ammonia ion selective electrode for ammonia ion concentration measurement. This Ion meter comes with ± 1 % F.S. measurement accuracy. Its direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the performance of ion selective electrode.

This water testing equipment is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Benchtop Ion meter is used to measure the ammonia ion concentration present in potable water, D/W water, waste water and natural water resources using different ion concentration electrodes.

Specifications

Ion measurement range	NH3 range: 1 × 106 - 1 M, 0.02 - 17000 ppm
Ion measurement accuracy	± 1 % F.S.
Resolution	0.001, 0.01, 0.1, 1
Calibration points	2 to 5 points
Calibration solutions	0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000 ppm, mol / L, mg / L
mV range	(-1999.9) to 1999.9 mV
mV accuracy	± 0.2 mV
mV resolution	0.1 mV
Temperature measurement range	0 to 105 °C, 32 to 221 °F
Temperature accuracy	± 0.5 °C, ± 0.9 °F
Temperature resolution	0.1°C
Temperature compensation	0 to 100 °C, 32 to 212 °F
Compensation mode	Manual or automatic
Data hold function	Manual or automatic endpoint detection
Reset function	Yes
Stability condition	Low or high
Calibration due	0 to 31 days
Power off	Manual or automatic (10,20,30 minutes)
Memory	Stores up to 500 sets of data
Output	communication interface
Connector
Display	(130 × 110 mm)
Power	DC 5 V, using AC adapter, AC 220 V / 50 Hz
Dimension (L × W × H)	210 × 188 × 60 mm
Weight	1.5 kg

Features

Large display

2 - 5 points calibration from low to high concentration

Direct ion concentration readout for elaborate measurement process

Selectable concentration units from ppm, mg / L, mol / L

mV measurements to check the performance of ion selective electrode

Temperature compensation provides accurate reading over the entire range

Stability indicator to show current measurement status

Calibration due reminder for regular calibration of the meter

Auto hold function to freeze stable reading for better viewing & recording

Automatic electrode diagnosis shows the slope of the sensor

Reset setting function

Expanded memory stores and recalls up to 500 readings

Built –in real time clock stamps

communication interface to transfer stored data to PC

FAQs

1. What are common use cases for It Benchtop Ion meter for NH3, in industrial or environmental settings?

It Benchtop Ion meter for NH3 is ideal for monitoring ammonia ion concentrations in potable water, distilled water, wastewater, and natural water bodies. It is particularly useful in wastewater treatment plants, aquaculture facilities, and environmental testing labs where ammonia presence can affect safety and compliance. The meter's detection range from 0.02 to 17000 ppm allows it to handle trace-level to high-concentration scenarios. This versatility supports both regulatory compliance and process optimization.

2. How does the Benchtop Ion meter for NH3 help ensure accurate measurements across varying environmental conditions?

The Benchtop Ion meter for NH3 includes automatic and manual temperature compensation over a wide range (0–100 °C), which adjusts readings for temperature-induced fluctuations in ion activity. This feature is critical in outdoor or industrial environments where sample temperatures may vary. Users can rely on stable results with a temperature accuracy of ±0.5 °C and resolution of 0.1°C even under changing conditions. This ensures dependable monitoring regardless of where the sample is collected.

3. Is the Benchtop Ion meter for NH3 suitable for users with limited technical experience?

Yes, Benchtop Ion meter for NH3 is designed to feature a large and a system menu that allows configuration of up to 8 key parameters. Direct ion concentration readouts in ppm, mg/L, or mol/L simplify interpretation for less experienced users. Calibration is at 2 to 5 points with commonly available standard solutions. New users can achieve accurate, repeatable results with built-in features like auto hold.

4. How does the Benchtop Ion meter for NH3 support data management and reporting needs?

Benchtop Ion meter for NH3 comes with built-in memory to store up to 500 data sets, each tagged with a real-time clock stamp for traceability. It also includes a communication interface for quick data transfer to a PC, making it easier to archive and report results. These features are useful for regulatory documentation, research logging, and long-term trend analysis. The ability to export data supports efficient lab workflow and digital recordkeeping.

5. What safety features help protect both the Benchtop Ion meter for NH3 and user measurements?

Benchtop Ion meter for NH3 includes auto power-off settings (10, 20, or 30 minutes), helping to preserve energy and prolong device life. The auto-hold features stabilize readings before they are logged, reducing the risk of recording inaccurate data. The robust display and durable housing make it suitable for busy lab environments. These safety measures ensure consistency and reduce the risk of human error during testing.

6. What regular maintenance practices are recommended for the Benchtop Ion meter for NH3?

The Benchtop Ion meter for NH3 requires regular calibration using the supplied standard solutions and adheres to the calibration due reminders. It is important to clean and store the ammonia ion-selective electrode properly after each use to avoid contamination or membrane damage. The temperature probe and interface should be checked and cleaned properly to help maintain performance. Periodic use of the reset function can restore factory settings if any operational inconsistencies occur.