Distillation Tester LDT-T2016

Introduction

Distillation Tester features a 125 ml distillation flask and supports operation in ambient temperatures up to 35°C. It features a condenser pipe that reaches as low as 0°C. It uses a compressor-based refrigeration device for efficiency. It is equipped with advanced immersion rod-type thermometers for accurate measurements.  Our distillation tester is a double-unit distillation tester designed for low-temperature conditions.

This petroleum testing is designed to meet the rigorous requirements of modern laboratory operations, ensuring high precision, reliability, and ease of use for various experimental applications.

Applications

Our Distillation Tester is used for the distillation analysis of petroleum products under barometric pressure conditions. It ensures precise boiling point determination of fuels, solvents, and other petroleum-based liquids.

Specifications

Distillation Flask	125 ml
Graduated Flasks	100 ml
Ambient Temperature	≤ 35 °C
Relative Humidity	≤ 85 %
Temperature Controlling Accuracy	± 0.5 °C
Thermometer	(-2) °C to 300 ℃ and (-2) °C to 400 ℃
Division Value	1°C
Scale Division	1 ml
Heating Power System	1000 W × 2
Total Power Consumption	≤ 5000 W
Power Supply	AC 220 V ± 10 %, 50 Hz
Inner Diameter of Electric Furnace	φ32 mm, φ38 mm
Outer Diameter of Electric Furnace	φ50 mm
Dimension	830 x 610 x 870 mm

Features

display 

Heating Power System

Precise temperature control system

Sturdy and compact design

FAQs

1. What types of samples can be tested with the Distillation Tester ?

The Distillation Tester is designed to analyze a wide range of petroleum products, such as gasoline, diesel, jet fuels, naphtha, and light crude oil fractions. We ensure the unit complies with D86 standards, making it ideal for precise distillation range testing. However, it is not recommended for samples with high viscosity or those requiring vacuum distillation. equipment performs best with volatile or moderately viscous samples that fall within ambient-pressure testing criteria.

2. How long does a typical distillation test take using the Distillation Tester ?

It Distillation Tester typically completes a standard D86 test within 45 minutes to 1 hour, depending on the complexity of the sample. The dual-unit design enables simultaneous testing, which significantly enhances productivity in busy labs. advanced heating and cooling systems help maintain consistent cycle times while ensuring accuracy. Minimal additional time is required for setup and pre-heating.

3. Is the Distillation Tester portable or fixed in place?

The Distillation Tester is considered fixed bench-top laboratory equipment due to its integrated refrigeration system and dual distillation setup. The design prioritizes stability and performance over portability, making it better suited for permanent lab installations. recommendation is to move the unit only when necessary and with proper lifting assistance or lab carts. Transporting it with care prevents damage to sensitive internal components.

4. What happens if the refrigeration system of the Distillation Tester fails?

Distillation Tester 's refrigeration system is critical for maintaining the correct condenser temperature, which directly affects boiling point accuracy. We recommend immediately shutting down the system if cooling performance drops and inspecting it for compressor or refrigerant issues. support team or an authorized technician should be contacted for repairs. Routine maintenance of the condenser unit can help avoid unexpected failures.

5. What should I do if the sample boils too quickly or too slowly in the Distillation Tester ?

It Distillation Tester may show irregular boiling if the heat setting or ramp rate is not properly adjusted. The unit should always be operated in accordance with D86 temperature guidelines to ensure consistent and accurate results. system provides precise heat control, so the power level must be carefully managed to avoid skewed data. Overheating or underheating can negatively affect both result quality and equipment longevity.