Roller Bottle Incubator LRBI-T2010

Introduction

Roller Bottle Incubator is a compact design, economical CO₂ incubator system designed to hold roller bottle apparatus. Features 5 to 60°C temperature range, 0 to 20 % CO₂ concentration range, 1 to 80 rpm bottle rolling speed range. Designed as hollow glass door unit with mirror-finished stainless steel interior chamber. The uniform temperature is maintained through forced air circulation technology. Alarm as a warning sign functions for over temperature, abnormal temperature sensor, independent overheating protection, CO₂ concentration dropdown. It provides a stable and controlled environment for cell culture, microbial growth, and other biological experiments. The precise temperature and humidity control ensure consistent experimental conditions and reliable results.

Applications

Roller Bottle Incubator is used in tissue cell culture testing and research analysis laboratories, research centers for tissue culture, biotechnology, medicine, etc.

Specifications

Temperature range	5 to 60°C
Temperature uniformity	±0.5°C (ambient temperature 25°C, set value 37°C, 5 % no load)
Temperature fluctuation	±0.2°C (ambient temperature 25°C, set value 37°C, 5 % no load)
CO2 Concentration range	0 to 20 %
CO2 Concentration accuracy	0.1% (at 5%)
CO2 Concentration reach	to to 5% in < 10 minutes
CO2 Sensor	IR sensor
Humidity range	50 to 90 % RH
Humidity accuracy	± 5 to 7%
Size of Bottle	1000 ml hollyhock bottle
Speed range for bottle	1 to 80 rpm
Voltage	AC 200 V, 50 Hz
Maximum power consumption	1700 W
Internal dimension	745×690×1115 mm
External dimension	845×885×1349 mm
Weight	175 kg

Features

Force air circulation technology offers uniform chamber temperature

High precision sensor and controller to control temperature accurately

Advanced microprocessor controlling chip with stable performance

Digital Display shows both Temperature range and CO₂ concentration range

Over-temperature alarm, automatic power off, safe and reliable

Internal electric outlet provision for attaching roller bottle

Easy to remove roller bottle apparatus

User-friendly operation

FAQs

1. How to calibrate the temperature and humidity controls in the laboratory incubator?

Calibration should be performed by qualified personnel using calibrated temperature and humidity sensors: 1) Place the calibrated sensors at different locations inside the incubator chamber to ensure uniform distribution; 2) Set the incubator to the desired temperature and humidity levels and allow it to stabilize for at least 24 hours; 3) Compare the readings from the incubator's display with the calibrated sensors; 4) Adjust the controls according to the manufacturer's instructions if discrepancies are found; 5) Document the calibration results and schedule regular recalibration (every 6-12 months).

2. What is the optimal way to arrange samples inside the incubator for uniform conditions?

To ensure uniform conditions: 1) Avoid overcrowding the incubator, leaving sufficient space between samples for air circulation; 2) Place samples away from the chamber walls, heating/cooling elements, and door to prevent temperature fluctuations; 3) Use shelves or racks that allow air to circulate freely around all samples; 4) Avoid placing large or heat-generating equipment inside the incubator; 5) Rotate samples periodically if long-term incubation is required to account for any minor temperature variations.

3. Can the incubator be used for anaerobic or CO2-enriched environments?

Specialized incubators (anaerobic incubators, CO2 incubators) are designed for these environments. Standard incubators may not maintain the required gas concentrations or oxygen-free conditions. For anaerobic applications, use an incubator equipped with a gas control system that maintains oxygen levels below 1% and may include catalysts to remove oxygen. For CO2-enriched environments, use a CO2 incubator that maintains precise CO2 concentrations (typically 5-10%) and humidity levels, essential for cell culture applications.

4. How to clean and disinfect the incubator to prevent contamination?

Regular cleaning and disinfection steps: 1) Turn off the incubator and allow it to cool down to room temperature; 2) Remove all samples and shelves; 3) Wipe the interior surfaces with a mild detergent solution, followed by a disinfectant compatible with the incubator materials (such as 70% ethanol); 4) For stubborn contamination, use a specialized laboratory disinfectant according to the manufacturer's instructions; 5) Clean the shelves and any accessories separately; 6) Allow all surfaces to dry completely before reassembling and restarting the incubator; 7) Perform this procedure monthly or more frequently if contamination is suspected.

5. What should be done if the incubator temperature fluctuates significantly?

If temperature fluctuations occur: 1) Check if the incubator door is properly closed and sealed; 2) Ensure the incubator is not placed near heat sources, air conditioning vents, or drafty areas; 3) Verify that the incubator is not overloaded, which can restrict air circulation; 4) Check the air filter (if equipped) and replace it if dirty; 5) Inspect the heating and cooling elements for proper operation; 6) If the problem persists, contact technical support for further diagnosis and repair, as it may indicate a malfunction in the temperature control system.