Portable Incubator LPI-T2010

Introduction

Portable Incubator is a compact, small and lightweight unit featured with microprocessor controller technology that adopts easy operation system and improves work efficiency. It works in ambient temperature range of +5 to 50°C and has 8 L volume capacity with gravity air convection type of circulation. This handy incubator is primarily designed for various outdoor working environment for microbial cultivation and heated storage. It provides a stable and controlled environment for cell culture, microbial growth, and other biological experiments. The precise temperature and humidity control ensure consistent experimental conditions and reliable results.

Applications

Ideal incubator for basic incubation and heated storage applications. Used in industrial, mining establishments, medical, sanitary field, biochemistry and agricultural science field for laboratory cultivation of bacterial culture, breeding and ferment.

Specifications

Air cycle Mode	Gravity air convection
Function	Temperature range RT +5 to 50 ℃ Temperature resolution ratio 0.1 ℃ Temperature motion ± 0.5 ℃ Temperature uniformity ± 1.5 ℃
Body structure	Inner chamber Mirror stainless steel Outer shell Cold rolling steel electrostatic spraying exterior Insulation layer 6.5 cm polyurethane interlayer Heater Nickel and chromium alloy heating wire
Controller	Temperature controller Intelligent Temperature setting mode Touch button setting Display mode Time setting range 0 to 9999 min Operation function Fixed temperature operation, Timing function, Auto stop Additional function Sensor deviation correction, Temperature overshoot self-tuning, Internal parameter locking, Power-off parameter memory Sensor CU50
Safety Device	Over temperature sound-light alarm
Technical specification	Inner chamber dimension (W × L × H) 200 × 160 × 230 mm Exterior dimension (W × L × H) 300 × 330 × 330 mm Packing dimension (W × L × H) 340 × 370 × 390 mm Volume 8 L Power consumption 300 W Power supply AC 220 V; 50/60 Hz, 1.3 A Net weight 9 kg Gross weight 11 kg

Features

Working temperature range of RT +5 to 50 ℃ and gravity air convection type of circulation

Compact, portable and stackable design saves bench space

Carrying strap provides easy transport of samples

microprocessor controller with 0.5 °C control sensitivity

display with accuracy of 0.1 °C for precise temperature monitoring

Constant time setting function for personalized culture experiment requirement

Side door opening (180°) and seal connector for easy loading of samples inhibits cross contamination

Automatic rectification in case of temperature sensor deviation

Audible and visual alarm system protection for over temperature

Auto circuit breaker function protects unit from power surges

Mirror stainless steel exterior with curved angle design for easy maintenance

Cold-rolled rugged steel with anti-bacterial powder coating resists dents, cracks, and chemical attack

FAQs

1. How to calibrate the temperature and humidity controls in the laboratory incubator?

Calibration should be performed by qualified personnel using calibrated temperature and humidity sensors: 1) Place the calibrated sensors at different locations inside the incubator chamber to ensure uniform distribution; 2) Set the incubator to the desired temperature and humidity levels and allow it to stabilize for at least 24 hours; 3) Compare the readings from the incubator's display with the calibrated sensors; 4) Adjust the controls according to the manufacturer's instructions if discrepancies are found; 5) Document the calibration results and schedule regular recalibration (every 6-12 months).

2. What is the optimal way to arrange samples inside the incubator for uniform conditions?

To ensure uniform conditions: 1) Avoid overcrowding the incubator, leaving sufficient space between samples for air circulation; 2) Place samples away from the chamber walls, heating/cooling elements, and door to prevent temperature fluctuations; 3) Use shelves or racks that allow air to circulate freely around all samples; 4) Avoid placing large or heat-generating equipment inside the incubator; 5) Rotate samples periodically if long-term incubation is required to account for any minor temperature variations.

3. Can the incubator be used for anaerobic or CO2-enriched environments?

Specialized incubators (anaerobic incubators, CO2 incubators) are designed for these environments. Standard incubators may not maintain the required gas concentrations or oxygen-free conditions. For anaerobic applications, use an incubator equipped with a gas control system that maintains oxygen levels below 1% and may include catalysts to remove oxygen. For CO2-enriched environments, use a CO2 incubator that maintains precise CO2 concentrations (typically 5-10%) and humidity levels, essential for cell culture applications.

4. How to clean and disinfect the incubator to prevent contamination?

Regular cleaning and disinfection steps: 1) Turn off the incubator and allow it to cool down to room temperature; 2) Remove all samples and shelves; 3) Wipe the interior surfaces with a mild detergent solution, followed by a disinfectant compatible with the incubator materials (such as 70% ethanol); 4) For stubborn contamination, use a specialized laboratory disinfectant according to the manufacturer's instructions; 5) Clean the shelves and any accessories separately; 6) Allow all surfaces to dry completely before reassembling and restarting the incubator; 7) Perform this procedure monthly or more frequently if contamination is suspected.

5. What should be done if the incubator temperature fluctuates significantly?

If temperature fluctuations occur: 1) Check if the incubator door is properly closed and sealed; 2) Ensure the incubator is not placed near heat sources, air conditioning vents, or drafty areas; 3) Verify that the incubator is not overloaded, which can restrict air circulation; 4) Check the air filter (if equipped) and replace it if dirty; 5) Inspect the heating and cooling elements for proper operation; 6) If the problem persists, contact technical support for further diagnosis and repair, as it may indicate a malfunction in the temperature control system.