Intelligent flow peristaltic pump LIFP-T2010

Introduction

Intelligent flow peristaltic pump is equipped with advanced a touch screen controller that allows real-time monitoring of parameters and change of speed. Equipped with advanced features such as flow rate calibration and anti-drip function. Easy dispense mode to dispense the recorded volume by one touch key. Intelligent cooling fan control effectively minimizes the work noise

It is widely used in laboratory liquid transfer applications, providing precise flow control and preventing cross-contamination. The pump's design ensures easy maintenance and long service life, making it suitable for continuous operation environments.

Applications

Specifications

Flow Range	0.006 ~ 1600 mL/min
Flow Accuracy	0.5 %.
Speed Range	0.1 ~ 350 rpm
No of channel	1
Speed Resolution	0.1 rpm
Ambient Temperature	0 ~ 40 °C
Relative Humidity	< 80 %
IP grade	IP 31
Power supply	AC 220 V ±10 % , 50 Hz / 60 Hz
Power Consumption	< 40 W
Dimensions ( L x W x H )	257 x 198 x 182 mm
Weight	5.3 kg

Features

display for monitoring parameters

Anti-drip function ensuring dispense accuracy

Speed resolution : 0.1 rpm

Adjustable rotating speed

Intelligent temperature control minimizing working noise

Reversible operation allowing pumping in both directions

Multi channels with interchangeable pump heads for varied applications

Easy liquid auto dispension by time or volume

Internal double layer isolation

Dust and moisture proof circuit board

Optional remote infrared control

Robust and protected with plastic housing

Low noise operation

FAQs

1. What factors should be considered when selecting a pump tube for the peristaltic pump?

When selecting a pump tube, you should consider the chemical compatibility with the liquid being transferred, temperature resistance, pressure requirements, and service life. Different materials (such as silicone, Viton, and Tygon) have different properties, so it's important to choose the appropriate tube material based on the specific application to ensure optimal performance and prevent tube failure.

2. How often should the peristaltic pump be calibrated to maintain accuracy?

It is recommended to calibrate the peristaltic pump every 3-6 months under normal usage conditions. More frequent calibration may be required if the pump is used continuously for long periods, handles corrosive liquids, or operates in harsh environmental conditions. Regular calibration ensures that the flow rate remains accurate and meets experimental requirements.

3. Can the peristaltic pump be used for viscous liquids?

Yes, the peristaltic pump can handle viscous liquids, but the flow rate may be affected by the liquid viscosity. For highly viscous liquids, it is recommended to select a pump with a larger tube diameter and lower speed to ensure smooth liquid transfer. Additionally, preheating the liquid (if compatible with the application) can reduce viscosity and improve pump performance.

4. What safety measures should be taken when operating the peristaltic pump?

When operating the peristaltic pump, ensure that the power supply matches the pump's requirements, avoid overloading the pump, and regularly inspect the pump tube for wear or damage. Keep hands and other objects away from the moving parts during operation. For hazardous liquids, use appropriate personal protective equipment and ensure proper ventilation in the operating area.

5. How to troubleshoot if the peristaltic pump has inconsistent flow rate?

Inconsistent flow rate may be caused by several factors: worn pump tubes, improper tube installation, air bubbles in the liquid, or pump head misalignment. First, check and replace worn tubes if necessary. Ensure the tube is properly installed and fully seated in the pump head. Remove air bubbles from the liquid line before starting the pump. If the problem persists, check the pump head alignment and contact technical support if needed.