Alcohol Tester T-S2TR-S2107

Introduction

Alcohol Tester is capable of measuring multi-units including up to 0.20 %BAC,2.00 ‰BAC,1.00 mg/L and 2.00 g/L. Integrated with warm up in 35 seconds for rapid assessments during time-sensitive evaluations. It features result output within 8 seconds, ensuring smooth flow during continuous screening in crowded checkpoints. Equipped with alerts beyond 0.05%BAC, 0.50‰BAC, or 0.25mg/L as per set thresholds. Alcohol Tester is built in a lightweight body, easy to carry in pockets or small compartments.

Calibrated according to national metrology standards, ensuring measurement accuracy and traceability. The instrument has passed CE certification, suitable for use in international markets.

Applications

Alcohol Tester is ideal for industrial and construction sites to confirm sobriety before entry into safety-sensitive areas, supporting workplace compliance.

Specifications

Sensor Type	Flat-surfaced semiconductor sensor
Detection Range	0.00 to 0.20%BAC, 0.00 to 2.00‰BAC,
Measurement Accuracy	±0.01% BAC at 0.05% BAC
Pre-Set Level	0.05%BAC; 0.50‰BAC; 0.25mg/L; 0.50g/L
Warm-Up Time	35 seconds
Testing Time	Less than 8 seconds
Test Capacity Per Full Charge	Over 100 breath tests
Display	1.0-inch LCD
Working Temperature	0℃ to 50℃, less than or equal to 95% RH (non-condensing)
Power Supply	2×AA batteries
Dimension	123 mm × 44 mm × 19 mm
Packaging Dimension	450 mm × 330 mm × 390 mm
Net Weight	50 g
Packaging Weight	11 kg
Repeatability	≤2% RSD

Features

High Test Capacity on Full Charge

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

LCD Digital Display

MCU Control

Wide Operating Temperature Range

Semiconductor Sensor 

FAQs

1. What is the main function of this Breath Alcohol Analyzer?

It is a professional laboratory instrument designed for Breath Alcohol Analyzer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Breath Alcohol Analyzer compared to similar products?

It provides high measurement accuracy, fast analysis speed, and good repeatability. The automatic calibration and self-diagnostic functions reduce human error and ensure reliable test results for critical applications.

3. What regular maintenance is required for this Breath Alcohol Analyzer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Breath Alcohol Analyzer?

Installation requirements include: 1) Selecting a vibration-free location to ensure measurement accuracy; 2) Providing stable power supply with voltage regulation if necessary; 3) Ensuring proper ventilation for instruments requiring gas exhaust; 4) Maintaining appropriate ambient temperature (usually 5-40℃) and humidity (≤85%) as specified in the operating manual.

5. What should I do if the Breath Alcohol Analyzer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.