Biological Indicator Incubator T-L2II-S2103

Introduction

Biological Indicator Incubator incubation within range of RT+5°C to 80°C. Designed to ensure excellent temperature stability and uniformity for reliable biological indicator testing. Features rapid heating rate of less than 6 minutes to save processing time. Built with clear display and timer function for efficient monitoring and operation control. Biological Indicator Incubator delivers dependable performance for sterilization validation and quality assurance.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Biological Indicator Incubator is employed in controlled incubation of biological indicators to verify sterilization effectiveness in laboratories, healthcare facilities, pharmaceutical production, and microbiological testing environments.

Specifications

Temperature Set Range	RT+5°C to 80°C
Temperature Uniformity Below 56°C	±0.3°C
Temperature Stability at 40°C	±0.3°C
Temperature Stability at 100°C	±0.3°C
Temperature Display Accuracy	0.1°C
Timer	0 to 99h, 0 to 99m, 0 to 99s
Heating Up Rate	Less than 6m (20°C to 56°C)
Power	8W
Weight	1kg

Features

Automatic fault detection 

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

Buzzer alarm function

Multiple security protection

Temperature calibration function

User-friendly LCD display

Easley replaceable blocks

Low power consumption

Standard Accessories

FAQs

1. What is the main function of this Biological Indicator Incubator?

It is a professional laboratory instrument designed for Biological Indicator Incubator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Biological Indicator Incubator compared to similar products?

It offers precise environmental control, effective contamination prevention measures, and intuitive operation interface. The uniform temperature and gas distribution inside the chamber ensure consistent culture results for sensitive biological samples.

3. What regular maintenance is required for this Biological Indicator Incubator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Biological Indicator Incubator?

Installation should meet: 1) Placing the instrument in a well-ventilated area with at least 10cm clearance around the sides and back for heat dissipation; 2) Ensuring a stable, level surface capable of supporting the instrument's weight; 3) Connecting to a dedicated power supply with appropriate voltage and grounding to prevent electrical issues; 4) Avoiding direct sunlight, heat sources, and areas with high humidity or dust.

5. What should I do if the Biological Indicator Incubator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.