Water Bath T-WBT-S2103

Introduction

Water Bath offers compact chamber with total capacity of 2L. Designed to maintain temperature up to 100°C. Built with large base-mounted heating plate that ensures uniform thermal distribution. Features high-resolution TFT display for easy monitoring and simplified operation. Water Bath provides sturdy build and corrosion-resistant interior lined with Teflon-coated stainless steel.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Water Bath is widely employed for sample thawing, reagent warming, microbiological culture incubation, enzyme reactions, and chemical solubility studies.

Specifications

Capacity	2L
Temperature Control Range	RT+5℃ to 100℃
Temperature Set Range	0 to 100℃
Temperature Accuracy	±0.3℃
Uniformity	±0.3℃ (at 37℃)
Timer	1m to 99h 59m
Drain Method	Manual
Power Consumption	250W
Power Supply	AC 100 to 120V/AC200 to 240V, 50 to 60Hz
Tank Dimension (W × D × H)	135×150×150 mm
Dimension (W × D × H)	205×253×204 mm
Weight	2kg

Features

Liquid level sensor alarm

PID-based control

Low power consumption

Storage memory for 10 programs

Manual drainage system 

Standard Accessories

FAQs

1. What is the main function of this Water Bath?

It is a professional laboratory instrument designed for Water Bath applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Water Bath compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Water Bath?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Water Bath?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Water Bath shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.