Thermostatic Water Bath T-TWB-S2104

Introduction

Thermostatic Water Bath combines 3 tanks with 2-liter volume each. It features microprocessor control for stable thermal performance and uniform heat distribution. Equipped with built-in overheating protection, it enhances safety during continuous or unattended operation. Incorporates digital controls for temperature and time, with independent displays on clear LED interface. Water Bath enables temperature control for incubation, warming, and sample preparation in labs.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Thermostatic Water Bath is ideal for stable temperature control for incubation, warming, and sample preparation in research, clinical, pharmaceutical, and chemical settings.

Specifications

Temperature Setting Range	0 to 100℃
Temperature Control Range	RT+5 to 100℃
Number Of Tank	3
Tank Capacity	6L
Timing Range	1min to 99h59min/∞
Temperature Accuracy	Less than or equal to ±0.3℃ at 37℃
Display Accuracy	0.1℃
Temperature Uniformity	Less than or equal to ±0.3℃ at 37℃
Heating Time	Less than or equal to 30min (from 25℃ to 100℃)
Power Consumption	900W
Power Supply	AC110V or 220V, 50/60Hz
Working Area	125×100×115 mm×3
Dimensions	588×254×310 mm
Weight	8.5 Kg

Features

Gabled lid 

Anti-spill condensation

High insulation

Cool-touch exterior

Stainless steel tank

Leak-proof

Side drain outlet

FAQs

1. What is the main function of this Thermostatic Water Bath?

It is a professional laboratory instrument designed for Thermostatic Water Bath applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Thermostatic Water Bath compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Thermostatic Water Bath?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Thermostatic Water Bath?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Thermostatic Water Bath shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.