Thermal Circulator T-TMC-S2115

Introduction

Thermal Circulator comes with 100 liters of capacity. It features built-in precooling function for rapid transitions between heating and cooling operations. Equipped with compact brazed plate heat exchanger for space-saving design and high thermal transfer rate. Incorporates clearly marked cooling water inlet and outlet ports for streamlined and reliable circulation setup. Circulator ensure temperature control in various labs and industries.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Thermal Circulator ensures temperature control in reactors, semiconductors, UV systems, extraction units, fermentation tanks, pilot lines, and sensitive processes in food and pharmaceutical industries.

Specifications

Volume	100 L
Working Temperature Range	-80 to 200℃
Flow Rate	42 L/min
Pressure	Less than or equal to 0.4 MPa
Pump Lift Range	25 m
Temperature Sensor	PT100
Refrigerant	R404
Ambient Temperature Range	5 to 35℃
Relative Humidity	Less than or equal to 70%
Temperature Control Accuracy	±0.1℃
External Input	External sensor port
Heating Power	9000W
Compressor Power	8832W
Cooling Power	26496W
Circulating Pump Power	370W
Power Consumption	18500W
Power Supply	380V/50Hz
Dimensions (W×D×H)	930×1530×1410 mm
Weight	306 Kg

Features

Enclosed compressor

Low noise

Liquid level display

Digital control panel

Pressure gauges

PT100 sensor 

Bath fluid ports

FAQs

1. What is the main function of this Thermal Circulator?

It is a professional laboratory instrument designed for Thermal Circulator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Thermal Circulator compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Thermal Circulator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Thermal Circulator?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Thermal Circulator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.