Thermal Circulator T-TMC-S2103

Introduction

Thermal Circulator comes with 10-liter capacity. It features dedicated cooling water inlet and outlet connections that allow effective heat dissipation. Equipped with high- and low-vacuum gauges, it monitors system pressure and ensures stable refrigeration. Incorporates digital control panel for temperature regulation and operational adjustments. Circulator provides reliable thermal control for equipment and processes across various fields.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Thermal Circulator is ideal for providing reliable temperature control for equipment and processes across industrial, laboratory, research, biotechnology, chemical, pharmaceutical, and food sectors.

Specifications

Volume	10 L
Working Temperature Range	-80 to 200℃
Flow Rate	20 to 40 L/min
Pressure	Less than or equal to 0.4 MPa
Pump Lift Range	4 to 6 m
Temperature Sensor	PT100
Refrigerant	R404
Ambient Temperature Range	5 to 35℃
Relative Humidity	Less than or equal to 70%
Temperature Control Accuracy	±0.1℃
External Input	External sensor port
Heating Power	3000W
Compressor Power	2205W
Cooling Power	6972W
Circulating Pump Power	100W
Power Consumption	7510W
Power Supply	220V/50Hz
Dimensions (W×D×H)	804×703×970 mm
Weight	170 Kg

Features

Plate heat exchanger

External PT100 support

Liquid level display

Leakage proof

Overheating protection

Bath fluid port

Ventilation window

FAQs

1. What is the main function of this Thermal Circulator?

It is a professional laboratory instrument designed for Thermal Circulator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Thermal Circulator compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Thermal Circulator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Thermal Circulator?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Thermal Circulator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.