Shaking Dry Bath Incubator T-SDI-S2101

Introduction

Shaking Dry Bath Incubator supports multi-block compatibility with shaking speeds of 1500 rpm and 800 rpm. It features rapid semiconductor cooling, reaching 5°C per minute (RT to 100°C) or 1°C per minute (below RT). Equipped with a sturdy build, ensuring durability in demanding conditions. Built with an adjustable timer ranging from 5 seconds to 24 hours for flexible processing. Shaking Dry Bath Incubator has a compact design, enabling effortless relocation and space-efficient placement.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Shaking Dry Bath Incubator is vital for protein denaturation, enzyme kinetics, and bacterial culture growth in biochemical analysis while supporting compound solubility testing and controlled reagent heating in pharmaceutical studies.

Specifications

Temperature Range	RT -15°C to 100°C
Settable Temperature	-5°C to 100 °C
Ambient Temperature	5 °C to 40 °C, 80% RH
Temperature Stability	±0.5°C
Speed	0 to 1500 rpm (Low Block) / 0 to 800 rpm (High Block)
Mode of Operation	Heating, Cooling and Shaking
Maximum Heating Rate	5.5°C per minute
Maximum Cooling Rate	5°C per minute (RT to 100 °C), 1°C per minute (Below RT)
Program memory	P1 to P9
Gradient Run	Yes
Timer	5seconds to 24hours
Power Consumption	150W
Power Supply	100 to 240V, 50/60HZ
Dimensions	265×190×150mm

Features

Triple-Mode Functionality 

Equipped with RS232/USB communication interface for data export and remote control. Supports connection to laboratory information management system (LIMS) for centralized data management and traceability.

Uniform Heating Distribution

Gradient Run Capability

9 Non-Volatile Programmable Memory 

High Screen Display Interface

Standard Accessories

FAQs

1. What is the main function of this Shaking Dry Bath Incubator?

It is a professional laboratory instrument designed for Shaking Dry Bath Incubator applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Shaking Dry Bath Incubator compared to similar products?

It offers precise environmental control, effective contamination prevention measures, and intuitive operation interface. The uniform temperature and gas distribution inside the chamber ensure consistent culture results for sensitive biological samples.

3. What regular maintenance is required for this Shaking Dry Bath Incubator?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Shaking Dry Bath Incubator?

Installation should meet: 1) Placing the instrument in a well-ventilated area with at least 10cm clearance around the sides and back for heat dissipation; 2) Ensuring a stable, level surface capable of supporting the instrument's weight; 3) Connecting to a dedicated power supply with appropriate voltage and grounding to prevent electrical issues; 4) Avoiding direct sunlight, heat sources, and areas with high humidity or dust.

5. What should I do if the Shaking Dry Bath Incubator shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.