Low Speed Centrifuge T-LC-S2300

Introduction

Low Speed Centrifuge features maximum speed of 4000 rpm. Equipped with brushless DC motor for stable, quiet, and maintenance-free operation. Incorporated with a digital display for real-time monitoring of speed and time. It offers capacity of 8 centrifuge tubes or 4 blood tubes and supports timing range of 30 seconds to 59 minutes 50 seconds. Centrifuge is ideal for clinical labs, routine blood separation, and sample processing settings.

Features imbalance detection system and automatic lid lock for operator safety. Complies with IEC 61010-2-020 standard specifically for centrifuges, ensuring safe and stable operation.

Applications

Low Speed Centrifuge is employed in clinical laboratories, blood banks, research centers, and educational institutions for routine blood separation, sample preparation, and low-speed sedimentation.

Rotor Selection

Name	Max speed (rpm)	Max Volume(ml)	Max RCF (g)
Multirotor 1	500-4000rpm	15ml× 4 Centrifuge tube	1717
Multirotor 2	500-4000rpm	2/5/10ml× 8 Blood tube	1717

Specifications

Max Capacity	Centrifuge Tube: 10/5/2 ml × 8, Blood Tube: 15 ml × 4
Speed Range	500 to 4000 rpm
Maximum RCF	1717 ×g
Semidiameter of Rotor	9.6 cm
Turn	Anticlockwise
Timing Range	30 s to 59 min 50 s
Control Mode	Digital Display + Key
Lid Open Protection Function	Yes
Ambient Temperature Range	5°C to 40°C
Humidity	Less than or equal to 80% RH
Power Consumption	35 W
Power Supply	AC 100V to 240V, 50/60 Hz
Dimension	26.5×26×19 cm
Packaging Dimension	33×33×25 cm
Net Weight	3.9 Kg
Gross Weight	5 Kg

Features

Compact design

Visual Window

Electromagnetic lock

Emergency Switch

Standard Accessories

FAQs

1. What is the main function of this Laboratory Centrifuge?

It is a professional laboratory instrument designed for Laboratory Centrifuge applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Laboratory Centrifuge compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Laboratory Centrifuge?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Laboratory Centrifuge?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Laboratory Centrifuge shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.