Single Beam Visible Spectrophotometer T-SV-S2202

Introduction

Single Beam Visible Spectrophotometer features 2 nm spectral bandwidth for reliable photometric performance. It supports wavelength range from 320 to 1100 nm with automatic setting functionality. Built with silicon photodiode detector for rapid and responsive signal detection. Designed to reduce stray light and minimize noise interference for clear and stable measurements. Spectrophotometer operates on tungsten lamp, ensuring consistent illumination throughout the visible spectrum.

Manufactured under strict quality control processes, complying with international laboratory equipment standards. Provides 1-year warranty for main components and lifetime technical support.

Applications

Single Beam Visible Spectrophotometer is employed in chemical analysis, pharmaceutical testing, food quality control, and academic laboratories for photometric analysis, quantitative measurement, spectral scanning, and wavelength testing.

Specifications

Wavelength	320 nm to 1100 nm
Spectral Bandwidth	2 nm
Optical System	Single Beam, Grating 1200 lines/mm
Wavelength Accuracy	±0.5nm
Wavelength Repeatability	Less than or equal to 0.1 nm
Wavelength Setting	Auto
Photometric Range	0 to 200%T, –0.3 to 3A, 0 to 9999C
Photometric Accuracy	0.3%T
Photometric Repeatability	0.2%T
Stray Light	0.05%T
Stability	±0.0001A/h at 500nm
Baseline Flatness	±0.002A
Noise	±0.001A
Detector	Silicon photodiode
Light Source	Tungsten lamp
Work Mode	T, A, C, E
Cuvette Holder	10mm manual 4-cell holder
Output	USB, RS232
Display	128×64 LCD
Power Supply	AC 110 to 220V 50 to 60Hz
Package Dimension	700×580×340 mm
Gross Weight	20 kg

Features

Multiple analytical modes

Manual 4-cell cuvette holder

USB and RS232 output

Large sample chamber

Adopts 51 microcomputer system

Low power consumption

Standard Accessories

FAQs

1. What is the main function of this Single Beam Visible Spectrophotometer?

It is a professional laboratory instrument designed for Single Beam Visible Spectrophotometer applications, providing accurate, reliable performance for sample analysis, processing, or storage in scientific research and industrial quality control.

2. What are the key advantages of this Single Beam Visible Spectrophotometer compared to similar products?

It combines high performance, user-friendly operation, and robust construction. The compliance with international standards and certifications ensures its reliability and suitability for various laboratory environments.

3. What regular maintenance is required for this Single Beam Visible Spectrophotometer?

General maintenance recommendations: 1) Keeping the instrument clean and free from dust and debris; 2) Following the manufacturer's calibration schedule to maintain accuracy; 3) Inspecting electrical connections and mechanical parts periodically for signs of wear; 4) Storing and using the instrument according to the operating manual to prevent damage.

4. What are the installation requirements for this Single Beam Visible Spectrophotometer?

Standard installation requirements: 1) Placing on a stable, level workbench in a clean laboratory environment; 2) Connecting to a properly grounded power supply matching the instrument's voltage requirements; 3) Ensuring adequate space for operation and maintenance; 4) Following any specific environmental conditions (temperature, humidity, ventilation) outlined in the product manual.

5. What should I do if the Single Beam Visible Spectrophotometer shows abnormal operation?

General troubleshooting guidelines: 1) First check the power supply and all connections to ensure they are secure; 2) Refer to the user manual's troubleshooting section for specific error messages or symptoms; 3) Perform a system reset if applicable; 4) Do not attempt to repair internal components without professional training; contact authorized service personnel for technical support when needed.