Introduction
Benchtop Multiparameter Meter is an intelligent multiparameter analyzer with automatic identification of standard solution. Features multi-reading features and dual temperature compensation, ensure accurate results. Designed with IP54 protection class and 7-inch LCD display, has GLP compliant data storage and advance data analysis to facilitate the optimum user experience.
Applications
Benchtop Multiparameter Meter is used for advanced pH and conductivity analysis to record pH, mV, ORP, pX, ISE, conductivity, total dissolved solids (TDS), salinity, resistivity, and temperature measurements across healthcare, environmental protection, biological agriculture and forestry, water quality analysis, scientific research and educational institutions.
Specifications
| Measuring parameters | pH/EC/ISE/Temperature (mV/ORP/pX/Resistivity/TDS/Salinity) |
| Measuring range | pH: -2.000 to 20.000 pH mV/ORP: -2000.00 to 2000.00 mV pX range: -2.000 to 20.000 pX ISE: 1E-9 to 9.999E9 Conductivity: 0.000 µS/cm to 2000 mS/cm Resistivity: 5.00 Ω·cm to 100.00 MΩ·cm TDS: 0.000 to 1000 ppt Salinity: 0.0 to 80.0 ppt Temperature: -10 to 135 °C, 14 to 275°F |
| Resolution | pH: 0.1, 0.01, 0.001 pH mV/ORP: 0.1, 0.01 mV pX: 0.1, 0.01, 0.001 pX ISE: Up to 4 significant units Conductivity: 0.001 µS/cm Resistivity: 0.01 Ω·cm TDS: 0.001 ppm Salinity: 0.1 ppt Temperature: 0.1 °C/°F |
| Accuracy | pH: ±0.002 pH mV/ORP: ±0.1 mV or ±0.03% pX: ±0.002 pX ISE: ±0.3% Conductivity: ±0.5%FS Resistivity: ±0.5% FS TDS: ±0.5% Salinity: ±1 ppt Temperature: ±0.1 °C/°F |
| Calibration points | pH: Up to 6 ORP: 1 custom point (relative mV) pX: Up to 6 ISE: Up to 6 Conductivity: Up to 5 |
| Standard recognition | pH: NIST, GB, DIN, USA, MERK, JIS Conductivity: 10 µS/cm, 84 µS/cm, 500 µS/cm, 1413 µS/cm, 12.88 mS/cm |
| ISE units | mol/L, mmol/L, g/L, mg/L, µg/L, ppm |
| Reading mode | Auto read, Timed, Continuous |
| Temperature compensation | Automatic, Manual |
| Data storage | 1000 groups |
| Data management | Log management with GLP features |
| Interface | USB, RS232 |
| Display | 7-inch LCD display |
| IP class | IP54 |
| Power supply | AC adapter, 100 to 240 V AC input, DC 24 V output |
| Dimension (L×W×H) | 220×195×68 mm |
| Packaging dimension (L×W×H) | 370×320×340 mm |
| Net weight | 950 g |
| Gross weight | 6 kg |
Features
An intelligent multiparameter analyzer
Automatic identification of standard solution
Support multi-reading functions for convenience
Dual temperature compensation for accuracy
IP54 protection class ensure flexibility
7-inch LCD display for convenient operation
GLP compliant data storage functions
Advance data analysis system for processing
Supports USB and RS232 interface
FAQ
Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.
Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.
Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.
Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.
Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.
