Introduction

Water Purifier is an ideal unit designed for laboratory use that provides a constant supply of RO and ultrapure water for high grade experiments via reverse osmosis technology. It has a 15-liter-per-houtput range with a tap water inlet and uses a 3-way water quality sensor and a 2-way flow sensor for quantified dispensing. It can produce single stage RO water with an ion rejection rate of more than 97% and ultrapure water resistivity of 18.2MΩ.cm.

Applications

It is widely used in HPLC, DNA sequencing, TOC testing, Ion Chromatography in the fields of general laboratories, molecular biology, life science and analytical applications etc.

Specifications

Output (25 °C)15 L/H
Flow RateUp to 2 L/min (with pressure tank)
Pure Water Outlet2; reverse osmosis and ultrapure water
Ultrapure Water Resistivity18.2 MΩ.cm
TOC<3 ppb
Deionized Water Bacteria< 0.1 cfu/ml
Particle< 1/ml
Ion Rejection Rate97% - 99% (new RO membrane)
Organic Rejection> 99%, when MW>200 Dalton
Particles And Bacteria Rejection Rate> 99%
Feed Water RequirementTap water
Temperature5 - 45 °C
Pressure1.0 - 4.0 Kgf/cm2
Power120 W
Electrical RequirementAC 100-240V, 50/60Hz
Dimension (L×W×H)500×360×540 mm
Weight20 Kg

Features

System sanitization procedure achieves disinfection of ultrapure water’s tube and valve

Circulation function achieves ultrapure water circulation to keep top quality of water

Consists all cartridges replacing alarm function

Multiple alarm function: no feed water, full water, water quality’s standard exceeding, and cartridge life expiring

Auto self-flushing of RO membrane function, extend RO’s membrane life

System time setting, timing standby and timing shutdown function

Level II password protect, protect all parameters prohibiting unauthorized access

2 kinds of pure water tank

3-door and easy-to-replace cartridge design

Optimized pre-treatment protect RO membrane

RO module with DOW’s membrane, ensure long life, stable operation and high desalinization rate

4 in 1 ultrapure cartridge with top polishing resin

Dual wavelength (185&254 nm) ultraviolet lamp module

MWCO 5000D ultra filtration module, effectively eliminate endotoxin

Auto run data storing function with built-in SD card, and data can be exported via USB

FAQ

Q1: What is the main application of this laboratory equipment?
A1: It is mainly used for general laboratory sample processing in laboratory settings, such as sample preparation, analysis, or processing.

Q2: Does the product come with a warranty?
A2: Yes, it provides a 1-year warranty for the main unit (excluding consumable parts), covering manufacturing defects and quality issues.

Q3: Is installation required after receiving the product?
A3: No, it is ready to use after unpacking. Simply connect the power supply (confirm the voltage matches) and follow the operation manual.

Q4: What are the power supply requirements?
A4: It supports AC 220V/50Hz or 110V/60Hz (selectable based on region), please confirm the voltage specification before use.

Q5: How to get technical support if there is a problem?
A5: You can contact our technical support team via email or phone. We provide online troubleshooting guidance and on-site service if needed.

Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.