Introduction
Baking dry cabinets are laboratory cabinets used for the drying and the baking of the glassware, the instruments, and the other items, and they are used in the chemistry, the biology, and the pharmaceutical laboratories for the drying of the washed glassware, for the sterilization by the dry heat, and for the baking of the items. The baking dry cabinet consists of an insulated cabinet with the shelves, a heating system, a temperature control system, a ventilation system, and a display, and it provides the heating and the drying at a controlled temperature, typically from the ambient temperature to 200-300 degrees Celsius, and it is used for the drying of the washed glassware, for the dry-heat sterilization of the glassware and the instruments, for the baking of the laboratory items, for the removal of the moisture and the solvents, and for many other applications; the baking dry cabinet provides a uniform temperature, with features such as the forced air circulation, the temperature control, the timer, and the over-temperature protection, and it is available in various sizes, from the small benchtop cabinets to the large floor-standing cabinets, and it is an essential equipment in the laboratory for the drying and the sterilization; the baking dry cabinet is used for the drying and the sterilization of the glassware, which is then used for the analytical and the biological work. Baking dry cabinets are used in the chemistry and the biology laboratories, in the pharmaceutical laboratories, in the clinical laboratories, in the research institutions, and for many other applications. With their drying and the baking, baking dry cabinets are essential for the laboratory glassware processing.
Baking Dry Cabinet LDBC-T2014
Baking Dry cabinet offers a 1436 dry module with a long lifespan. Our baking dry cabinet offers super low humidity control along with low temperature baking. This drying cabinet is desig...
Baking Dry Cabinet LDBC-T2012
Baking Dry Cabinet offers a capacity of 870 desiccant module for long-lasting performance. It incorporates an auto-regenerating desiccant module for extended use. Our baking dry cabinet ...
Baking Dry Cabinet LDBC-T2013
Baking Dry Cabinet has a capacity of 1436 dry module with a long lifespan. Our baking dry cabinet offers ultra-low humidity control combined with low-temperature baking. This drying cab...
Baking Dry Cabinet LDBC-T2010
Baking Dry Cabinet offers a capacity of 320L with a temperature and humidity range of 40°C and <10%RH. This unit also functions as a low-humidity storage cabinet without activating the ...
Baking Dry Cabinet LDBC-T2011
Baking Dry Cabinet provides a 435 drying. This features high-precision sensors for accurate temperature and humidity readings. It maintains consistent internal conditions with effective ...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Baking dry cabinet for controlled low-temperature drying and storage.
2. Heated cabinet with air circulation and humidity control.
3. For electronics, electrodes, materials and laboratories.
4. Includes cabinet, heater, fan, controller and manual.
5. Dries items gently while preventing moisture reabsorption.
FAQ
Q1: What scenarios is this cabinet used for?
A: It dries and stores electrodes, electronic parts, samples and materials at controlled low temperature with air circulation, preventing moisture reabsorption in laboratories and workshops.
Q2: What standards does it comply with?
A: It follows relevant electrical safety, EMC and related GB/T standards, with temperature and, where fitted, humidity verified. The relevant parameters are verified during final inspection before shipment, and compliance documentation or test reports can be provided on request for your quality records.
Q3: What is the warranty?
A: The cabinet carries a 12 to 24 month warranty covering the chamber, heater and controls. Seals and filters are wear parts. Damage from over-temperature or unauthorized repair is excluded.
Q4: Is it hard to operate?
A: Operation is simple: load items, set temperature and run. We provide a manual and guidance.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: We recommend verification against traceable standards at regular intervals, typically every 6 to 12 months, and keeping calibration records for audit purposes. The manual describes the procedure, and reference standards are available from us. Accredited third-party calibration can also be arranged on request.
Q7: Are consumables universal?
A: Seals and filters are cabinet-specific, while thermometers are universal. Ongoing cost is minimal.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include chamber size, temperature range, shelves, data logging and humidity readout. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: Standard delivery includes the cabinet and manual. Installation is not required, with setup guidance provided.
Q10: What items are compatible?
A: It handles electrodes, electronics and materials rated for the drying temperature. It is not for wet dripping items, flammable vapors, or specimens beyond load and size.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.