Introduction
An automatic oil tester is an instrument used to automatically perform the tests on oils, such as the dielectric breakdown voltage test, the acidity test, and other analyses, and it is used in the electrical power industry, in the petroleum industry, and in the testing of insulating and lubricating oils. The automatic oil tester performs the tests automatically, with the sample prepared and the test parameters set, and the test is performed and the results are recorded, with features such as automated operation, the control of the test conditions, and the data management; the automatic oil tester is used for the testing of insulating oils, such as transformer oil, for the measurement of the dielectric breakdown voltage, for the testing of the acidity, for the testing of the flash point, and for other analyses, and it provides rapid and reproducible results, with a reduced operator workload, and it is available as benchtop instruments with various test functions; the automatic oil tester follows the standardized methods for the oil tests, and it is used for the condition monitoring and the quality control of the oils, and it provides features such as a display, a printer, and the storage of the results. Automatic oil testers are used in the electrical power industry for the testing of the transformer oil, in the petroleum and lubricant industry for the quality control of the oils, in the maintenance of the electrical equipment, in research laboratories, and for many other applications. With their automated testing, automatic oil testers are essential for the efficient testing of oils.
Oil Tan Delta Tester LOAT-T2010
Oil Tan Delta Tester has a 1.5 kVA capacity, making it ideal for testing and operating high-voltage equipment. It is controlled by a powerful single-chip microcomputer for stable and rel...
Automatic Oil Tester LOAT-T2010
Automatic Oil Tester has a booster capacity of 1.5 kVA. It offers adjustable boost speeds from 0.5 kV/s to 5.0 kV/s, with 10 selectable levels increasing by 0.5 kV/s. It supports multipl...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Automatic oil tester for automated petroleum property testing.
2. Automated tester with sample handling and measurement.
3. For petroleum, lubricant and fuel QC laboratories.
4. Includes tester, software, accessories and manual.
5. Performs standardized oil tests with reduced manual steps.
FAQ
Q1: What scenarios is this tester used for?
A: It automates a specified petroleum or lubricant property test, reducing manual handling and improving repeatability in fuel and oil QC laboratories.
Q2: What standards does it comply with?
A: It follows the relevant ASTM, ISO or GB/T method for the configured test, with measurement calibrated. We confirm the stated performance during final inspection and can supply a certificate of conformity together with supporting documents for audit purposes.
Q3: What is the warranty?
A: The tester carries a 12 to 24 month warranty covering the instrument. Reagents and consumables are separate. Damage from misuse is excluded.
Q4: Is it hard to operate?
A: Operation is simple after method training: load sample, select method and start. We provide a manual and training.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: We recommend verification against traceable standards at regular intervals, typically every 6 to 12 months, and keeping calibration records for audit purposes. The manual describes the procedure, and reference standards are available from us. Accredited third-party calibration can also be arranged on request.
Q7: Are consumables universal?
A: Reagents are method-specific, while common accessories are standard. Ongoing cost depends on the test.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include test methods, autosamplers, data systems and 21 CFR software. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: Standard delivery includes the tester and manual. Installation and training are available.
Q10: What samples are compatible?
A: It handles oils and fuels within the configured method. It is not for incompatible chemicals, samples outside range, or tests requiring different apparatus.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.