Introduction
An electronic density meter is an instrument used to measure the density of liquids and, in some models, of solids, with high accuracy, and it is used in the food, beverage, pharmaceutical, chemical, petroleum, and many other industries for quality control and analysis. The electronic density meter measures the density of the sample by the oscillating U-tube method, in which the sample is introduced into a U-shaped tube that is caused to oscillate, and the frequency of the oscillation depends on the mass, and therefore the density, of the sample, and the instrument measures the oscillation frequency and calculates the density; the density meter provides a rapid and accurate measurement, with an accuracy of up to 0.00001 grams per cubic centimeter, and it requires a small sample volume, and it provides temperature control, since the density depends on the temperature, and it may provide the measurement of related parameters, such as the specific gravity, the concentration, and the alcohol content, with features such as automatic temperature compensation, calibration, and data management; the electronic density meter is available as benchtop and portable instruments, and it is used for the analysis of beverages, such as the alcohol content of beer and wine, for the measurement of the concentration of solutions, for the quality control of pharmaceutical products, for the measurement of petroleum products, and for many other applications. Electronic density meters are used in the food and beverage industry, in the pharmaceutical industry, in the chemical industry, in the petroleum industry, in research laboratories, and for many other applications. With their high accuracy, electronic density meters are essential for density measurement.
Electronic Wood Density Meter LWDM-T2011
Electronic Wood Density Meter is robust and compact design device. It offers 0 .001 to 150 g weighing range and 10 seconds testing time. Designed with wood products, density and volume o...
Electronic Wood Density Meter LWDM-T2010
Electronic Wood Density Meter is robust and compact design device. It offers 0 to 100 % measuring range and 1 to 99 min heating time range. Designed with large 5 inch digital color touch...
Standards
ISO 15212-1:2018-Oscillating-element density meters-Laboratory instruments
ISO 15212-2:2018-Oscillating-element density meters-Process instruments for homogeneous liquids
Complies with the above standards, but is not limited to them.
Features
1. Electronic density meter for electronic density measurement.
2. Digital density meter using an oscillating cell or other method.
3. For liquids in chemical, petroleum and quality laboratories.
4. Includes meter, cell, controls and manual.
5. Displays density and concentration digitally.
FAQ
Q1: What scenarios is this meter used for?
A: It measures liquid density and concentration electronically for QC in chemical, petroleum and related laboratories, displaying results digitally.
Q2: What standards does it comply with?
A: It follows ASTM D4052, ISO 12185 and related GB/T standards, with calibration traceable. The relevant parameters are verified during final inspection before shipment, and compliance documentation or test reports can be provided on request for your quality records.
Q3: What is the warranty?
A: The meter carries a 12 to 24 month warranty covering the instrument. Cells require careful cleaning. Damage from misuse is excluded.
Q4: Is it hard to operate?
A: Routine use is simple after training. We provide a manual and training.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: Performance should be verified periodically using calibrated reference standards, with results logged in the equipment record. Most users perform this check every 6 to 12 months or according to their internal quality schedule. We provide the procedure, reference materials and formal calibration service if required.
Q7: Are consumables universal?
A: These are disposable consumables and should be replaced after use to avoid cross-contamination. They are standard laboratory items available directly from us or from general laboratory suppliers, which keeps running costs low. We recommend keeping a small stock, and bulk pricing is available for regular orders.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include autosamplers, concentration tables and data systems. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: No installation is required for this unit. It is ready to run after a simple power connection and the leveling steps shown in the manual. We supply a detailed operation guide and online setup videos, and on-site commissioning can be arranged separately if your facility requires it.
Q10: What samples are compatible?
A: It handles homogeneous liquids within range. It is not for solids, gases, viscous or particle-laden samples that block the cell, or incompatible chemicals.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.