Introduction
An automatic electrolyte analyzer is a clinical laboratory instrument used to measure the concentrations of electrolytes, such as sodium, potassium, chloride, calcium, and other ions, in biological samples, such as serum, plasma, urine, and whole blood, and it is a core instrument in clinical chemistry and diagnostics. The electrolyte analyzer measures the concentrations of the ions by ion-selective electrode (ISE) methods, in which the sample is brought into contact with ion-selective electrodes, each of which develops an electrical potential that depends on the concentration of a specific ion, and the potentials are measured and converted to ion concentrations; the automatic electrolyte analyzer performs the measurement automatically, with the sample aspirated and the results displayed, and it is designed for rapid and accurate measurements, with features such as automatic calibration, quality control, and data management, and it can process many samples, with a high throughput, and it measures the electrolytes that are important for diagnosing and monitoring many conditions, such as kidney disease, dehydration, electrolyte imbalances, and acid-base disorders; the analyzer is available in various configurations, from compact benchtop models for small laboratories and point-of-care use to larger analyzers for high-throughput laboratories. Automatic electrolyte analyzers are used in hospital laboratories for routine electrolyte testing, in clinical diagnostics, in emergency and critical care, in dialysis centers, in veterinary laboratories, and in many other applications, and they are essential for the rapid assessment of electrolyte status. With their rapid and accurate measurement, automatic electrolyte analyzers are essential for clinical electrolyte testing.
Automatic Electrolyte Analyzer LAEA-T2010
Automatic Electrolyte Analyzer requires minimal sample volume (as low as 80μL) and delivers results within 25 seconds. It has an imported TCO₂ module for reliable performance and preci...
Automatic Electrolyte Analyzer LAEA-T2011
Automatic Electrolyte Analyzer test plasma, serum, whole blood, urine, and samples, measuring parameters such as K⁺, Na⁺, Cl⁻, Ca²⁺, pH, and TCO₂. It operates within a temperature ...
Automatic Electrolyte Analyzer LAEA-T2017
Automatic Electrolyte Analyzer features fast measuring cycle of under 25 seconds and a sample volume requirement of just 80µL. It can store over 10,000 results and has standard network ...
Automatic Electrolyte Analyzer LAEA-T2016
Automatic Electrolyte Analyzer measure parameters like K⁺, Na⁺, Cl⁻, Ca²⁺, fault alarms and troubleshooting support, making it easy to use. With a wide measuring range and impressiv...
Automatic Electrolyte Analyzer LAEA-T2012
Automatic Electrolyte Analyzer features fast measurement cycle of less than 25 seconds requiring only 80μl of sample volume. It offers a user-friendly interface with online fault alarms...
Automatic Electrolyte Analyzer LAEA-T2015
Automatic Electrolyte Analyzer can test plasma, serum, whole blood, urine, and samples, measuring parameters such as K⁺, Na⁺, Cl⁻, Ca²⁺ and, pH. It operates within a temperature ran...
Automatic Electrolyte Analyzer LAEA-T2013
Automatic Electrolyte Analyzer include the ability to test electrolytes like K⁺, Na⁺, and Cl⁻ in plasma, serum, whole blood, urine, and cerebrospinal fluid (). Its one-button maintena...
Automatic Electrolyte Analyzer LAEA-T2014
Automatic Electrolyte Analyzer is a 5-parameter analyzer requiring just 80μL of sample and deliver results in under 25 seconds. It offers a large storage capacity for over 10,000 result...
Automatic Electrolyte Analyzer LAEA-T2021
Automatic Electrolyte Analyzer processes a sample volume of 65μL and delivers results in approximately 30 seconds. It can store over 1,000 test results, allowing for a streamlined diagn...
Automatic Electrolyte Analyzer LAEA-T2020
Automatic Electrolyte Analyzer is a 3-parameter analyzer, testing potassium (K⁺), sodium (Na⁺), and chloride (Cl⁻), with high precision across a broad range. It requires a minimal sam...
Automatic Electrolyte Analyzer LAEA-T2011
Automatic Electrolyte Analyzer rapidly measures 5 electrolyte concentrations with only 100 µL of whole blood. Designed with latest dry electrochemical technology with exclusive molecula...
Automatic Electrolyte Analyzer LAEA-T2010
Automatic Electrolyte Analyzer offers an efficient and accurate analysis of electrolyte concentrations in biological samples during the diagnosis and management of electrolyte disorders....
Standards
IEC 61010-2-081:2015-Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
Complies with the above standards, but is not limited to them.
Features
1. Automatic electrolyte analyzer for electrolyte testing.
2. Automated clinical analyzer measuring electrolytes.
3. For hospitals and clinical laboratories.
4. Includes analyzer, reagents, controls, software and manual.
5. Processes electrolyte tests automatically.
FAQ
Q1: What scenarios is this analyzer used for?
A: It measures electrolyte ions in clinical samples with automated sample handling for hospitals and laboratories, providing rapid results for patient care.
Q2: What standards does it comply with?
A: It follows clinical laboratory, medical device and ISO 15189-related requirements and GB/T standards, with tests validated and controls run.
Q3: What is the warranty?
A: The analyzer carries a 12 to 24 month warranty covering the instrument. Reagents are consumables. Damage from spills or misuse is excluded.
Q4: Is it hard to operate?
A: Operation requires trained laboratory staff for QC and maintenance. We provide a manual, installation and training.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: Performance should be verified periodically using calibrated reference standards, with results logged in the equipment record. Most users perform this check every 6 to 12 months or according to their internal quality schedule. We provide the procedure, reference materials and formal calibration service if required.
Q7: Are consumables universal?
A: Compatible items are single-use consumables designed for this application. They are widely available in standard sizes, and we can supply them directly or confirm the specification so you can source them locally. Ongoing cost is limited to these consumables, and there are no proprietary locked parts.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include test menus, throughput, LIS connectivity and data systems. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: No installation is required. The unit is delivered fully assembled and factory tested, so you only need to place it on a level surface, connect power and follow the quick-start guide. An illustrated manual and setup video are included, and our engineers provide remote guidance if needed.
Q10: What samples are compatible?
A: It handles serum, plasma and validated specimens for configured tests. It is not for non-clinical samples, tests outside the menu, or specimens beyond validated volumes.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.