Infusion pump

Introduction

An infusion pump is a medical device used for the controlled delivery of the fluids, the medications, and the nutrients into the patient's body, and it is used in the hospitals, the clinics, the home care, and the many other applications. The infusion pump delivers the fluids at the controlled rates, by the syringe pump, the peristaltic pump, or the piston mechanism, and it provides the accurate and the consistent delivery, with the programmable flow rates and the volumes; the infusion pump consists of a pump mechanism, a syringe or the tubing set, a control system with the display, the alarms, and the battery or the mains power, and it provides features such as the programmable delivery and the safety alarms; the infusion pump is used for the delivery of the intravenous medications, for the delivery of the fluids, for the delivery of the nutrition, for the delivery of the anesthesia, for the pain management, and for many other applications, and it is available in various types and configurations; the infusion pump is an essential medical device for the controlled delivery. Infusion pumps are used in the hospitals, in the clinics, in the home care, in the emergency, and for many other applications. With their controlled delivery, infusion pumps are essential for the accurate medication delivery.

Infusion Pump LINP-T2010

Infusion Pump offers an extensive rate range from a gentle 0.1 to a rapid 2000 ml/h; it adapts to any clinical demand. The pump has an advanced 13-level occlusion pressure monitoring and...

Send Inquiry View more

Standards

IEC 60601-2-24-Medical electrical equipment-Infusion pumps and controllers

Complies with the above standards, but is not limited to them.

Features

1. Infusion pump for controlled, precise delivery of fluids and medications to patients.

2. Volumetric or syringe infusion pump for accurate intravenous therapy delivery.

3. Suitable for hospitals, clinics, emergency rooms, ICU, home care and healthcare.

4. Includes pump mechanism, controller, display, alarm system, power supply and manual.

5. Supports precise fluid and medication delivery for patient care and treatment.

FAQ

Q1: What testing scenarios is this pump mainly applied to?

A: The infusion pump is used in hospitals, clinics, emergency rooms, intensive care units (ICU), operating rooms, pediatric wards, oncology, home care and healthcare to deliver fluids, medications, nutrients and blood products intravenously (or other routes) at controlled, precise rates and volumes for patient treatment and care. It supports general intravenous fluid delivery (hydration, electrolytes), medication infusion (antibiotics, chemotherapy, analgesics, vasoactive drugs), parenteral nutrition (TPN), blood product transfusion (with appropriate pump type), pediatric/neonatal infusion (low flow rates), ICU critical care infusion (vasopressors, sedatives), anesthesia delivery, and home care infusion therapy. The infusion pump provides accurate, controlled delivery that cannot be reliably achieved by gravity drip, essential for medications with narrow therapeutic windows and critical care applications.

Q2: What standards does the pump comply with?

A: The infusion pump follows relevant IEC, ISO and GB/T standards for medical electrical equipment and infusion pumps, including IEC 60601-1 (medical electrical safety), IEC 60601-2-24 (infusion pumps particular requirements), IEC 62304 (medical device software), ISO 14971 (risk management), and applicable medical device regulations (FDA 510(k), CE MDR, NMPA). The pump follows applicable alarm standards (IEC 60601-1-8 for alarm systems). Drug library and dose error reduction software (DERS) follow applicable clinical standards. Users should verify regulatory approval status in their jurisdiction.

Q3: What is the warranty period for the whole pump and key components?

A: The whole infusion pump is covered by a 12-month warranty. The pump mechanism, controller, display, alarm system, power supply and housing are covered, while batteries, tubing, cassettes and fuses are consumables or accessories. Damage from improper use, fluid spillage or unauthorized repair is excluded. Extended service contracts are standard for this medical device (typically includes preventive maintenance and calibration). Battery may have separate warranty terms.

Q4: Is this device difficult to operate? Is professional training required?

A: Operation requires trained healthcare professionals (nurses, doctors) familiar with infusion therapy, pump operation and patient safety. We provide comprehensive training, operation manuals and clinical application support. Proper pump setup, drug library use, dose calculation, rate/volume programming, alarm response, patient monitoring, battery management and regulatory documentation are critical for safe, effective infusion therapy. Infusion pumps are high-risk medical devices requiring proper training.

Q5: What is the typical lead-time for order delivery?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is regular calibration required? What is the recommended calibration cycle?

A: Flow rate accuracy calibration recommended every 6-12 months per biomedical engineering schedule and regulatory requirements. Alarm system testing per schedule. Battery performance verification every 6 months (replace when capacity degrades). Routine inspection of pump mechanism and tubing. Full pump performance verification annually. Software updates installed per manufacturer schedule (security patches, drug library updates). Drug library updated regularly per hospital pharmacy.

Q7: Are supporting consumables universal?

A: Infusion sets (tubing, cassettes), batteries, cleaning supplies and fuses are available from the manufacturer or authorized distributors, though infusion sets are typically proprietary to the pump model (for volumetric pumps with cassette). Long-term consumable cost includes infusion sets (per use) and depends on patient volume.

Q8: Can I customize parameters or supporting accessories?

A: Customization includes pump type (volumetric, syringe, PCA, TCI, enteral), flow rate range, volume range, drug library (custom per hospital), software features (DERS, wireless connectivity, EMR integration), alarm profiles, language, battery type and accessories. Additional pumps, infusion sets and accessories can be ordered separately. Custom drug library configuration requires hospital pharmacy collaboration. Custom orders extend delivery lead-time.

Q9: Does the purchase include on-site installation and commissioning service?

A: Yes, infusion pumps include on-site installation, commissioning, biomedical engineering verification, drug library setup and operator training by certified clinical specialists. Site preparation guidance and implementation support are provided before clinical use.

Q10: What types of fluids are compatible with this equipment?

A: The infusion pump delivers intravenous fluids including crystalloids (normal saline, lactated Ringer solution), colloids, medications (antibiotics, chemotherapy, analgesics, vasoactive drugs, sedatives), parenteral nutrition (TPN), blood products (with appropriate pump type - not all pumps are suitable for blood), and other intravenous therapies within the fluid type, flow rate and pump specification. Different pump types are suitable for different applications: volumetric pumps for general infusion, syringe pumps for low-volume/high-potency medications, PCA pumps for patient-controlled analgesia, TCI pumps for target-controlled infusion (anesthesia). Very viscous fluids (blood, TPN with lipids) may require specific pump types or infusion sets. Users should select appropriate pump type for the fluid/medication, use compatible infusion sets (proprietary to pump model), program correct rate and volume (verify with second healthcare professional for high-alert medications per ISMP guidelines), use drug library and DERS (dose error reduction system) to prevent medication errors, monitor patient response and infusion site regularly, respond to alarms promptly (occlusion, air-in-line, low battery, completion), follow proper infection control (change infusion sets per hospital policy, typically 72-96 hours for continuous infusion), maintain battery charge (for transport/home care), and for high-alert medications (insulin, heparin, opioids, vasopressors, chemotherapy), follow additional safety procedures (independent double-check, smart pump drug library). The pump should be cleaned regularly (especially after fluid spills) with appropriate disinfectant. The infusion set should be inspected for air bubbles (use air-in-line alarm). The pump should not be used with fluids that are incompatible with the infusion set material. For blood transfusion, use a pump specifically rated for blood (some pumps can cause hemolysis). For pediatric/neonatal use, use pumps with microflow capability (low flow rates, small volume increments). The pump should be calibrated per biomedical engineering schedule. For home care, provide patient/caregiver training and emergency contact information. Waste (used infusion sets, needles) should be disposed of per biohazard/sharps regulations. The pump should have proper biomedical engineering tracking (asset management, maintenance records). Infusion pump safety is critical - follow ISMP (Institute for Safe Medication Practices) guidelines for smart pump use and medication safety.