Introduction
An automatic Tag closed cup flash point tester is an instrument used to measure the flash point by the Tag closed cup method, with the automatic operation, and it is used in the petroleum, the paint, the solvent, the safety, and the many other industries. The Tag closed cup method measures the flash point by the heating of the sample in a closed cup at a controlled rate and the application of the ignition at the intervals, and it is used for the liquids with the flash points below 93 degrees Celsius, following the standard test methods, such as the ASTM D56; the automatic Tag closed cup flash point tester consists of a closed test cup, a heating and a temperature control system, an automatic ignition and the detection system, and the display, and it provides the flash point, with the automatic operation and the detection; the automatic Tag closed cup flash point tester is used for the measurement of the flash point of the solvents, the paints, the varnishes, and the other liquids, for the safety, for the classification, for the quality control, and for many other applications, and it is an essential instrument for the flammability testing. Automatic Tag closed cup flash point testers are used in the petroleum industry, in the paint industry, in the solvent industry, in the safety, and for many other applications. With their automatic operation, automatic Tag closed cup flash point testers are essential for the flash point measurement.
Automatic Tag Closed Flash Point Tester LACF-T2011
Automatic Tag Closed Flash Point Tester features a temperature range of -35℃ to 105℃, accommodating a wide variety of liquid samples. It is equipped with advanced an external cooling s...
Automatic Tag Closed Flash Point Tester LACF-T2010
Automatic Tag Closed Flash Point Tester is a highly automated machine with -50°C lowest flash point and simple operations. Used to determine flash point of liquids with viscosity below ...
Standards
ISO 2719:2025-Determination of flash point-Pensky-Martens closed cup method
ASTM D93-25-Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ISO/TR 29662:2020-Petroleum products and other liquids-Guidance for flash point and combustibility testing
Complies with the above standards, but is not limited to them.
Features
1. Automatic Tag closed cup flash point tester for low-flash petroleum products.
2. Closed cup design with automated heating, stirring and ignition for reproducible results.
3. Specifically designed for samples with flash point below 93 degrees Celsius.
4. Suitable for gasoline, solvents, naphtha and other volatile petroleum products.
5. Includes test cup, lid assembly, stirrer, ignition system and automatic controller.
FAQ
Q1: What testing scenarios is this tester mainly applied to?
A: The automatic Tag closed cup flash point tester is used in petroleum refineries, fuel terminals, solvent manufacturing, paint production and regulatory agencies to automatically determine the flash point of volatile petroleum products and solvents with flash points below 93 degrees Celsius. It supports gasoline specification testing, solvent safety classification, naphtha and kerosene quality control, paint thinner characterization, hazardous material classification and regulatory compliance testing. The Tag closed cup method is specifically designed for low-flash, volatile materials where open cup methods would allow excessive vapor loss. The automated system provides consistent heating rate, stirring and ignition application, reducing operator variability. It is essential for facilities handling volatile flammable liquids requiring accurate, standardized flash point determination for product specification, transportation classification, safety assessment and regulatory compliance for low-flash petroleum products and solvents.
Q2: What standards does the tester comply with?
A: The test method follows ASTM D56 for Tag closed cup flash point, ISO 1516 and ISO 1523 for low-flash materials, and the corresponding GB/T methods. The instrument complies with relevant laboratory safety standards. Test cup dimensions, stirring speed and heating rate should follow the standard specification.
Q3: What is the warranty period for the whole machine and key components?
A: The heating apparatus, stirrer, ignition system and controller are covered by a 12-month warranty. The test cup, lid assembly and thermometer are consumables or accessories. Damage from improper use or unauthorized repair is excluded.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation requires trained laboratory personnel familiar with flash point testing and fire safety. We provide an operation manual and remote guidance. Proper sample filling, lid sealing and safety procedures are important for accurate results and safe operation with volatile samples.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Temperature calibration against a reference thermometer recommended every 6-12 months. Heating rate and stirring speed verification periodically. Full method verification with certified low-flash reference materials recommended for accredited laboratories.
Q7: Are supporting consumables universal?
A: Test cups, thermometers and ignition gas are available from laboratory suppliers, though cup dimensions should match the Tag method specification. Long-term consumable cost is low.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes automation level, temperature range and ignition source type. Additional cups and accessories can be ordered separately. Custom orders extend delivery lead-time.
Q9: Does the purchase include on-site installation and commissioning service?
A: Standard delivery includes the apparatus and accessories with an operation manual. Remote commissioning guidance is provided. On-site service is not included for standard orders.
Q10: What types of samples are compatible with this equipment?
A: The tester measures flash point of volatile petroleum products and solvents with flash points below 93 degrees Celsius. Samples with higher flash points should use Pensky-Martens or Cleveland open cup methods. Very volatile samples require careful handling and proper lid sealing. Users should follow proper safety procedures for flammable materials, ensure the test area is free from drafts and ignition sources, and have appropriate fire safety equipment available. The closed cup design reduces vapor loss but requires proper lid sealing for accurate results.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.