Introduction
Petroleum testing is the testing of the petroleum products, such as the crude oil, the fuels, the lubricants, and the greases, to determine their physical and the chemical properties, the quality, and the performance, and it is performed in the petroleum, the fuel, the lubricant, and the quality control industries. Petroleum testing includes the various test methods, such as the distillation, the flash point, the viscosity, the density, the pour point, the water content, the sulfur content, the oxidation stability, and the corrosion tests, following the standard test methods, such as the ASTM and the ISO standards, and it is performed with the various testing instruments and the equipment, such as the distillation testers, the flash point testers, the viscometers, and the sulfur analyzers; petroleum testing is used for the quality control of the petroleum products, for the compliance with the specifications and the regulations, for the assessment of the performance, for the development of the products, for the research, and for many other applications; the petroleum testing provides the data for the assessment of the quality and the performance of the petroleum products, and it is an essential activity in the petroleum industry. Petroleum testing is performed in the petroleum industry, in the fuel industry, in the lubricant industry, in the laboratories, and for many other applications. With its various test methods, petroleum testing is essential for the quality assessment of the petroleum products.
Oxidation Stability Tester LOST-T2020
Oxidation Stability Tester offers a temperature range from ambient to 150°C with a precision of ±0.1°C. This tester operates using the oxygen bomb method for reliable results. Its sma...
Water Content Tester LWT-T2011
Water Content Tester is fabricated to determine water content in petroleum products and grease according to D95 (Test Methods for Water Content of Petroleum Products) and D7303 (Test Met...
Crude Petroleum Water Content Tester LWT-T2010
Crude Petroleum Water Content Tester designed as per D4006 Standard Test Method for Water in Crude Oil by Distillation. Widely used to determine the water content in crude oils. Features...
Water Content Tester LWT-T2010
Water Content Tester is fabricated to determine water content in petroleum products and grease according to D95 (Test Methods for Water Content of Petroleum Products) and D7303 (Test Met...
X-ray Fluorescence Sulfur in Oil Analyzer LST-T2010
X-ray Fluorescence Sulfur in Oil Analyzer offers wide measurement range 0.0050%–5% with 10 ppm detection limit. Employs fluorescence intensity ratio method with automatic correction adj...
Specific Gravity Tester LSGT-T2010
Specific Gravity Tester determines the theoretical maximum specific gravity of bituminous mixtures in accordance to D2041 Standard Test Method for Theoretical Maximum Specific Gravity of...
Carbon Residue Tester (CONRADSON METHODS) LRCT-T2010
Carbon Residue Tester (Conradson Method) is equipped with advanced a 30 ml porcelain crucible. Features an iron wire fire bridge on top that serves as the maximum height indicator. It in...
Penetrometer LMPT-T2013
Penetrometer is a fully automatic unit for determining needle penetration of highway bitumen, modified asphalt, as well as liquid petroleum asphalt or residue of emulsified asphalt after...
Penetrometer LMPT-T2010
Penetrometer is a six grade softening unit for determining needle penetration of bituminous mixture and cone penetration of lubricating grease with control time. It has digital display w...
Penetrometer LMPT-T2011
Penetrometer is a temperature controlled unit for determining penetration of pavement petroleum asphalt, modified asphalt, liquid petroleum asphalt and emulsified asphalt. It has digital...
Penetrometer LMPT-T2012
Penetrometer is a two grade low temperature controlled unit for determining penetration of pavement petroleum asphalt, modified asphalt, liquid petroleum asphalt and emulsified asphalt w...
Distillate Fuel Oil Oxidation Stability Tester LOST-T2012
It is a standard floor type model designed with digital temperature controller for accurate temperature controlling. Made of stainless steel and its shelf is treated by spray plastic for...
Automatic Lubricating Oils Oxidation Stability Tester LOST-T2010
Automatic features a 30 L oil bath capacity and maintains a 30° angle between the bomb and water surface. It checks pressure, records test data, and calculates oxidation time automatica...
Transformer Oil Oxidation Stability Tester LOST-T2011
Transformer Oil Oxidation Stability Tester is designed to test up to six samples simultaneously, significantly improving work efficiency. Each of its six test units is independently equi...
Automatic COC Flash & Fire Point Tester LOFP-T2010
Our is deliberately furnished to determine both flash point and fire point. It has a wide range of applications with a great market value. It is designed as per the standard D92, ISO2592...
Automatic Cleveland Open Cup Flash Point Tester LOFP-T2012
Automatic Cleveland Open Cup Flash Point Tester operates efficiently within an ambient temperature range of 10°C to 40°C and a relative humidity of up to 80%. It allows presetting of f...
Open Cup Flash Point Tester LOFP-T2010
It is designed with higher precision and perfection to meet its wide range of applications. It is incorporated with advanced and reasonable temperature control features. This petroleum t...
Automatic Pour Point Tester LLTT-T2023
It is manufactured with as the core control system. It is also deliberately fabricated with colored touch screen, detecting sensor and semiconductor refrigeration technology. It is desig...
Multifunctional Low Temperature Tester LLTT-T2016
It A16 is a multifunctional instrument with screen, four chambers, each chamber has two cooling bath. The instrument is designed and made as per D2386 “Test Methods for Solidifying Poin...
Distillate Fuel Cold Filter Plugging Point Filter LLTT-T2012
Distillate Fuel Cold Filter Plugging Point Filter operates within an ambient temperature range of (-10) ℃ to 35℃ and a relative humidity of up to 85%. It comes with a precise cooling b...
Existent Gum Tester LEGT-T2031
Existent Gum Tester operates at a working temperature range of 60℃ to 165℃. Its aluminum bath construction ensures efficient thermal transfer and durability. The system supports both a...
Engler Viscometer LEV-T2011
Engler Viscometer features 100 ml graduated flask and operates within a wide temperature range of 0 to 100 °C. It offers an accurate standard water timing value of 51 ± 1 seconds. It i...
Engler Viscometer LEV-T2010
Engler Viscometer is designed according to the D1665 “Test Methods for Engler Viscosity of Petroleum Products” standard. It is devised with digital temperature controller and its chamb...
Density Tester LDMT-T2010
Density Tester offers temperature controlling range of 0℃ to 100℃ with accuracy of ±0.1℃. It has temperature automatic control system with high temperature control accuracy. The test...
Coulometric Karl Fischer Titrator LWT-T2030
Coulometric Karl Fischer Titrator ensures accurate moisture determination across a measurement range of 0 to 100 mg. This titrator provides a high resolution of 0.1 µg for precise testi...
Automatic Softening Point Tester LSPT-T2010
Automatic softening point tester is a bench top microprocessor controlled analytical unit that determines the softening point of two samples at once. Operated via touch panel it uses bal...
Base Number Tester LAAT-T2013
It is composed of automatic potential titrator and titration device. It is designed according to Industry Standard of Petrochemical and follows D2896 and D4739 “Test Methods for Base Nu...
Automatic Dielectric Tester LADT-T2010
Automatic Dielectric Tester features capacity of 2.0 kVA. Delivers high testing precision with strong anti-interference performance for accurate, stable results. Compact and lightweight ...
Acid Number and Acidity Tester LAAT-T2011
It is designed as per a “Test Methods for Acid Number of Petroleum Products” and “Test Methods for Acidity of Gasoline, Kerosene, and Diesel oil”. This petroleum testing is designed ...
Acid Number Tester LAAT-T2012
Acid Number Tester is automated and controlled by microprocessor unit. It offers 0 to 1800.0 mV potential measurement range and ≥0.05 mg /g acid number measurement range. It works on po...
Automatic Thermogravimetric Analyzer LTGA-T2010
Automatic Thermogravimetric Analyzer features a broad temperature range from room temperature up to 1150°C. It offers three modes for temperature control: heating, cooling, and constant...
Water Soluble Acid and Alkali Tester LAAT-T2010
It is deliberately fabricated to have high accuracy and easy operation mode. It is constructed as per “Test Methods for Water Soluble Acid and Alkali of Petroleum Products”. This petro...
Automatic Tag Closed Flash Point Tester LACF-T2010
Automatic Tag Closed Flash Point Tester is a highly automated machine with -50°C lowest flash point and simple operations. Used to determine flash point of liquids with viscosity below ...
Aniline Point Tester LAPT-T2010
Aniline Point Tester is designed with stepless speed regulation motor to have a smoother operation and automatic alarm system with sound and light to detect end point. It is designed and...
Aniline Point Tester LAPT-T2011
Aniline Point Tester is manufactured along with two sets of testing device likely dark petroleum products and heavy petroleum products. The instrument is designed and made as per D611 “...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Petroleum testing equipment for comprehensive analysis of crude oil and petroleum products.
2. Covers physical, chemical and performance properties of fuels, lubricants and crude oil.
3. Suitable for refineries, fuel laboratories, pipeline monitoring and third-party testing.
4. Includes test instruments for distillation, flash point, viscosity, sulfur and other properties.
5. Supports quality control, specification compliance and regulatory testing for petroleum products.
FAQ
Q1: What testing scenarios is this equipment mainly applied to?
A: Petroleum testing equipment is used in oil refineries, fuel quality laboratories, pipeline operators, storage terminals, third-party testing organizations and regulatory agencies to analyze the physical, chemical and performance properties of crude oil, gasoline, diesel, jet fuel, lubricants and other petroleum products. It supports crude oil assay evaluation, refined product specification testing, fuel quality certification, pipeline batch tracking, refinery process control, regulatory compliance testing and lubricant performance evaluation. Comprehensive petroleum testing covers distillation, flash point, viscosity, sulfur content, density, pour point, cloud point, water content, acid number and other critical properties. It is essential for refineries, testing laboratories and regulatory bodies requiring accurate, standardized petroleum analysis to ensure product quality, verify specification compliance, monitor process performance and meet increasingly stringent environmental and fuel quality regulations worldwide.
Q2: What standards does the equipment comply with?
A: Petroleum testing follows ASTM, ISO, IP and GB/T standard test methods for each property including ASTM D86 for distillation, ASTM D93 for flash point, ASTM D445 for viscosity, ASTM D5453 for sulfur and corresponding ISO and GB methods. The instruments comply with relevant laboratory safety standards. Calibration should use certified reference materials traceable to international standards.
Q3: What is the warranty period for the whole machine and key components?
A: Each instrument in the petroleum testing lineup is covered by a 12-month warranty. Key components including heating systems, detectors, controllers and sensors are covered, while consumables such as tubes, cups, standards and reagents are excluded. Extended service contracts are available for laboratory setups.
Q4: Is this equipment difficult to operate? Is professional training required?
A: Operation requires trained petroleum analysts familiar with standard test methods and instrument operation. We provide operation manuals, training and application support for each instrument. Proper sample preparation, calibration, test execution and result interpretation are important for accurate, reproducible petroleum testing results.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Each instrument should be calibrated per its specific standard method and manufacturer schedule, typically every 6-12 months. Routine verification with certified reference materials before each analytical batch is recommended for regulated laboratories. Consumable replacement and preventive maintenance follow each instrument schedule.
Q7: Are supporting consumables universal?
A: Consumables, reagents and reference standards are available from multiple qualified suppliers, though instrument-specific parts should be sourced from the manufacturer or authorized distributor. Long-term consumable and reagent cost depends on testing volume and instrument types.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes instrument configuration, automation level, sample capacity and software features. Complete laboratory setup can be customized to specific testing requirements. Custom orders extend delivery lead-time and require specification consultation.
Q9: Does the purchase include on-site installation and commissioning service?
A: Standard delivery includes instruments with operation manuals. On-site installation, commissioning, calibration and training are recommended for complete petroleum testing laboratories and can be arranged as a project service. Remote guidance is provided for individual instruments.
Q10: What types of samples are compatible with this equipment?
A: Petroleum testing equipment handles crude oil, gasoline, diesel, jet fuel, lubricants, bitumen and other petroleum products within each instrument specification. Sample type determines the appropriate test method and instrument. Highly volatile samples require special handling. Users should follow the specific standard test method for each property, use certified calibration standards, maintain instruments per manufacturer schedules, and ensure proper sample handling and storage to preserve sample integrity for accurate testing results.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.