Benchtop Water Hardness Meter

Introduction

A benchtop ion meter is used for selective ion concentration measurement in solutions. It is widely used in environmental and chemical laboratories.

Standards

ISO 6508-1:2015-Metallic materials-Rockwell hardness test-Test method

Complies with the above standards, but is not limited to them.

Features

1. Sturdy frame and precise indenter ensure consistent results.

2. Reference blocks support periodic verification.

3. Accessories and spare indenters are available.

4. Simple operation reduces training and test time.

5. Choice of scale or method suits the material and hardness range.

FAQ

What are the main applications of the Benchtop Water Hardness Meter?

The Benchtop Water Hardness Meter is used to measure the hardness of materials such as metals, rubber, plastics, foams or coatings. It supports material verification, heat-treatment checks and quality control in manufacturing and inspection.

Which standards and regulations apply to the Benchtop Water Hardness Meter?

The tester is designed with reference to applicable ISO, ASTM and GB/T standards for the relevant hardness scale and IEC 61010 electrical safety. Procedures must follow the specified standard method. Compliance documentation can be provided on request.

What warranty comes with the Benchtop Water Hardness Meter?

The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.

Will staff need special training?

The controls are designed for regular laboratory use, so most users become confident after a brief introduction. The manual walks through each step, and common settings can be saved for repeat work. Online or on-site training is available if the site requires it.

How long does delivery usually take?

Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

How often should the Benchtop Water Hardness Meter be calibrated?

The unit is calibrated and tested before delivery. For ongoing accuracy, verify it against traceable reference standards every 6 to 12 months, or according to the laboratory quality schedule. We can arrange calibration service and certificates where required.

Are consumables and spare parts easy to obtain?

The instrument uses standard, widely available consumables rather than special locked items. Replacement parts, accessories and consumables can be ordered from us against the model number. We keep common service parts in stock for prompt supply.

Are options or configurations available?

Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.

Do you provide on-site installation?

Most models can be commissioned by following the manual, including positioning, connections, checks and a first test run. Remote guidance is available during start-up. On-site installation, commissioning and training can be arranged separately where required.

What maintenance and safety points matter?

Do not test on curved, thin or poorly prepared surfaces, use the wrong scale or exceed the instrument range. Verify on reference blocks. Follow the operating instructions.