Introduction
A 25D manual video measuring system is an optical measuring system used for the dimensional measurement of the parts and the components, with the manual operation and the video imaging, and it is used in the manufacturing, the quality control, the inspection, and the many other applications. The 25D manual video measuring system consists of an optical system with the camera and the lens, a measuring stage with the manual movement in the X, the Y, and the Z axes, the illumination, and the software, and it captures the images of the part and measures the dimensions, the angles, and the positions, with the manual positioning of the part and the software analysis; the 25D manual video measuring system is used for the measurement of the dimensions of the machined parts, the electronic components, the molds, and the other products, for the quality control, for the incoming inspection, for the process control, and for many other applications, and it is available in various configurations, with the different measuring ranges; the 25D manual video measuring system provides an accurate and a convenient measurement, and it is an essential instrument for the dimensional metrology. 25D manual video measuring systems are used in the manufacturing, in the quality control, in the inspection, in the laboratories, and for many other applications. With their video imaging, 25D manual video measuring systems are essential for the dimensional measurement.
Manual Video Measuring System T-VMS-S2103
Manual Video Measuring System T-VMS-S2101
Manual Video Measuring System T-VMS-S2102
Manual Video Measuring System T-VMS-S2100
Standards
ISO 10360-7:2011-Geometrical product specifications (GPS)-Acceptance and reverification tests for CMM-CMMs equipped with imaging probing systems
VDI/VDE 2617-Accuracy of coordinate measuring machines-characteristics and their testing
Complies with the above standards, but is not limited to them.
Features
1. Manual video measuring system for non-contact dimensional measurement of parts.
2. High-resolution camera with optical zoom for precise image capture and measurement.
3. 2D measurement software supports length, angle, radius, position and geometric tolerances.
4. Suitable for precision parts, electronics, plastics, metal components and quality inspection.
5. Includes measuring table, camera, lens, lighting and measurement software.
FAQ
Q1: What testing scenarios is this system mainly applied to?
A: The manual video measuring system is used in quality control laboratories, manufacturing inspection departments, electronics manufacturing, precision machining, plastics production and research institutions to perform non-contact dimensional measurement of small and medium-sized parts. It supports measurement of length, width, angle, radius, hole position, pitch, concentricity and other geometric features on components such as electronic connectors, precision machined parts, plastic moldings, stamped metal parts, medical components and micro-mechanical parts. The non-contact video measurement avoids deformation of delicate or soft parts and provides fast, repeatable 2D inspection for quality assurance, first-article inspection and process control in manufacturing environments where precise dimensional verification is required.
Q2: What standards does the system comply with?
A: The measuring system complies with ISO 10360 for coordinate measuring system performance, VDI/VDE 2617 for accuracy verification, and relevant GB/T standards for video measuring machines. Measurement uncertainty should be evaluated according to ISO 15530 and applicable quality standards. The system complies with relevant electrical safety standards.
Q3: What is the warranty period for the whole machine and key components?
A: The whole system is covered by a 12-month warranty. The camera, lens, measuring table and software are covered, while lighting bulbs and cables are accessories. Damage from improper use, dropping or unauthorized repair is excluded. Extended service contracts are available.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation requires training in measurement software, optical focusing and part positioning. We provide operation manuals, software training and application support. Proper lighting setup, focus adjustment and measurement technique are important for accurate and repeatable results.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: System calibration with a certified glass scale or artifact is recommended annually per ISO 10360. Optical magnification and distortion verification should be performed periodically. Routine verification with a standard artifact before critical measurement batches is recommended. Software updates and maintenance follow the manufacturer schedule.
Q7: Are supporting consumables universal?
A: Lighting bulbs, cables and calibration artifacts are available from the manufacturer or authorized distributors. Long-term consumable and service cost is moderate.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes measuring table size, camera resolution, lens magnification, lighting configuration and software modules. Custom orders require technical specification exchange and extend lead-time. Users should define part size, measurement features and accuracy requirements before configuration.
Q9: Does the purchase include on-site installation and commissioning service?
A: Yes, video measuring systems include on-site installation, commissioning, calibration and operator training by certified engineers. Site preparation guidance is provided before delivery to ensure the foundation, power and environmental requirements are met.
Q10: What types of samples are compatible with this equipment?
A: The system measures flat or moderately contoured parts within the measuring table size and optical field of view. Highly reflective, transparent or very dark parts may require special lighting or surface preparation. Very tall parts may exceed the depth of field. Users should select appropriate magnification and lighting for each part type, ensure proper part fixturing, and follow calibration and verification procedures to maintain measurement accuracy and traceability.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.