Introduction
Nitrogen Evaporator, designed for efficient and precise solvent evaporation, ensures high throughput. They feature temperature control and adjustable nitrogen flow rates and process multiple samples simultaneously. evaporator includes over-temperature protection, and water flow alarms for safe operation and provides accurate results. These are integrated with a user-friendly interface for real-time monitoring of parameters and easy operation. They are crafted with durable and corrosion-resistant materials for reliable performance.
Nitrogen Evaporator T-S214NE
Nitrogen Evaporator operates at temperatures up to 100 °C and accommodates 48 samples, ensuring precise sample concentration. It features an adjustable nitrogen consumption of 330 ml per...
Nitrogen Evaporator T-S230NE
Nitrogen Evaporator is designed to accommodate 6 samples each with a capacity of 200mL. It features an adjustable nitrogen flow rate of 5 to 10 liters/ min for 6 for precise control of ev...
Nitrogen Evaporator T-S221NE
Nitrogen evaporator is a microprocessor-controlled unit with water bath system. The adjustable heights of the nitrogen distributor employ wide range of experimental accessibilities. Blowi...
Nitrogen Evaporator T-S213NE
Nitrogen evaporator is a microprocessor-controlled unit with heater block system. The adjustable heights of the nitrogen distributor employ wide range of experimental accessibilities. Blo...
Nitrogen Evaporator T-S220NE
Nitrogen evaporator is a microprocessor-controlled unit with water bath system. The adjustable heights of the nitrogen distributor employ wide range of experimental accessibilities. Blowi...
Nitrogen Evaporator T-S212NE
Nitrogen evaporator is a microprocessor-controlled unit with heater block system. The adjustable heights of the nitrogen distributor employ wide range of experimental accessibilities. Blo...
Nitrogen Evaporator T-S210NE
Nitrogen evaporator is a microprocessor-controlled unit with heater block system. The adjustable heights of the nitrogen distributor employ wide range of experimental accessibilities. Blo...
Nitrogen Evaporator T-S211NE
Nitrogen evaporator is a microprocessor-controlled unit with heater block system. The adjustable heights of the nitrogen distributor employ wide range of experimental accessibilities. Blo...
Standards
Complies with the above standards, but is not limited to them.
Features
1. Exhaust or condensation options manage solvent vapour.
2. Timer and automatic shut-off support unattended runs.
3. Clear display shows temperature, time and gas settings.
4. Multiple positions process several samples in parallel.
5. Easy cleaning supports sample changeover.
FAQ
What are the main applications of the Nitrogen Evaporator?
The Nitrogen Evaporator is used to concentrate samples by evaporating solvent under gentle conditions. It supports analytical, environmental, biological and residue laboratories preparing samples for analysis.
What standards does the Nitrogen Evaporator comply with?
The unit is designed with reference to IEC 61010 electrical safety, applicable sample-preparation practice and relevant GB/T standards. Procedures should follow the relevant method. Compliance documentation can be provided on request.
How long is the warranty period?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
Will staff need special training?
No advanced specialist skills are needed for standard operation, though correct sample handling and safety practice should be followed. We supply a detailed manual and start-up support. For multi-user or regulated sites, a short staff training session can be arranged.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
How often should the Nitrogen Evaporator be calibrated?
The unit is calibrated and tested before delivery. For ongoing accuracy, verify it against traceable reference standards every 6 to 12 months, or according to the laboratory quality schedule. We can arrange calibration service and certificates where required.
Where do we get replacement parts?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Can it be adapted to our requirements?
The standard model can be configured with selected accessories and operating options to suit the task. Non-standard requests are assessed before quotation so the final build is clearly defined. We confirm details before production.
Do you provide on-site installation?
The unit is delivered ready for set-up, with clear commissioning steps in the manual. We provide remote technical support during installation. For larger or regulated systems, a factory-trained engineer can attend on site on request.
What maintenance and safety points matter?
Do not evaporate hazardous solvents without ventilation or trapping, overheat samples or block gas paths. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.