Introduction
Flame spectrophotometer is a specialized analytical instrument used in chemistry and environmental science for the quantitative analysis of trace metals in samples. It employs a flame, usually an air-acetylene or nitrous oxide-acetylene flame, to atomize and excite the metal ions present in the sample. The emitted light is then passed through a monochromator and detected, allowing for the identification and quantification of specific metal elements based on their characteristic emission spectra. Flame spectrophotometers are widely used in laboratories and research settings to determine metal concentrations in a variety of materials, including water, soil, and biological samples. Measurement accuracy: ±0.01 pH; range: 0.00 to 14.00 pH.
Flame Spectrophotometer T-S216FSP
Flame Spectrophotometer measures potassium from 0 to 100 ppm and sodium from 0 to 160 ppm for accurate elemental analysis. It features fast and reliable results with a response time of un...
Flame Spectrophotometer T-S215FSP
Flame Spectrophotometer is an analytical instrument with pre-selection flame sizes for elemental detection. Liquefied petroleum gas is consumed for burning of the flame to produce lumines...
Flame Spectrophotometer T-S212FSP
Flame Spectrophotometer is an analytical instrument with pre-selection flame sizes for elemental detection. Liquefied petroleum gas is consumed for burning of the flame to produce lumines...
Flame Spectrophotometer T-S213FSP
Flame Spectrophotometer is an analytical instrument with pre-selection flame sizes for elemental detection. Liquefied petroleum gas is consumed for burning of the flame to produce lumines...
Flame Spectrophotometer T-S214FSP
Flame Spectrophotometer is an analytical instrument with pre-selection flame sizes for elemental detection. Liquefied petroleum gas is consumed for burning of the flame to produce lumines...
Flame Spectrophotometer T-S211FSP
Flame Spectrophotometer is an analytical instrument with pre-selection flame sizes for elemental detection. Liquefied petroleum gas is consumed for burning of the flame to produce lumines...
Flame Spectrophotometer T-S210FSP
Flame Spectrophotometer is a tabletop and compact flame photometer for the simultaneous measurement of elements K, Na, Li, Ca, Ba and K. Features automatic calculation of correlation coef...
Standards
European Pharmacopoeia 2.2.25-Spectrophotometry, ultraviolet and visible
ASTM E275-08(2022)-Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
Complies with the above standards, but is not limited to them.
Features
1. Cuvette holders and accessories suit different sample types.
2. Low stray-light design supports accurate absorbance readings.
3. Multi-cell or sipper options increase measurement throughput.
4. Multiple modes support absorbance, transmittance, concentration and kinetics.
5. Automatic wavelength calibration and self-checks support reliability.
FAQ
What are the main applications of the Flame Spectrophotometer?
The Flame Spectrophotometer is used to measure absorbance, transmittance or concentration of samples across a defined wavelength range. It supports quantitative analysis, purity checks, kinetics and quality control in chemistry, biology, pharmaceutical and environmental laboratories.
What standards does the Flame Spectrophotometer comply with?
The instrument is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for spectrophotometers, including wavelength and photometric accuracy. Procedures should follow applicable standard methods. Compliance documentation can be provided on request.
What does the warranty cover?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
How easy is the Flame Spectrophotometer to use?
No advanced specialist skills are needed for standard operation, though correct sample handling and safety practice should be followed. We supply a detailed manual and start-up support. For multi-user or regulated sites, a short staff training session can be arranged.
How long does delivery usually take?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
How often should the Flame Spectrophotometer be calibrated?
Factory calibration is included, and routine verification is recommended every 6 to 12 months using suitable reference materials. Regulated sites may require more frequent checks and documented records. Calibration support and certificates can be provided on request.
Where do we get replacement parts?
The instrument uses standard, widely available consumables rather than special locked items. Replacement parts, accessories and consumables can be ordered from us against the model number. We keep common service parts in stock for prompt supply.
Can it be adapted to our requirements?
The standard model can be configured with selected accessories and operating options to suit the task. Non-standard requests are assessed before quotation so the final build is clearly defined. We confirm details before production.
Is installation and commissioning included?
The unit is delivered ready for set-up, with clear commissioning steps in the manual. We provide remote technical support during installation. For larger or regulated systems, a factory-trained engineer can attend on site on request.
What should be avoided when using the Flame Spectrophotometer?
Do not measure highly corrosive or incompatible samples, use dirty cuvettes or skip blank correction. Verify wavelength and photometric accuracy periodically. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.