Introduction
Drying oven incubator is a multifunctional laboratory instrument that combines the capabilities of a drying oven and an incubator. It is appropriate for drying, heating, and incubating a variety of samples and materials since it offers accurate temperature control for both heating and incubating applications. These ovens are commonly used in research and industrial settings, such as the food, pharmaceutical, and materials science industries, where controlled temperature environments are necessary for processes like drying glassware, curing polymers, or conducting experiments that require consistent and stable conditions.
Drying oven incubator T-S214DOI
Drying oven incubator is a dual functioning oven-incubator with a rapid heating and working temperature of 5 °C to 80 °C for incubator and 80 °C to 300 °C for the oven. Built-in s...
Drying oven incubator T-S215DOI
Drying oven incubator is a dual functioning oven-incubator with a rapid heating and working temperature of 5 °C to 80 °C for incubator and 80 °C to 300 °C for the oven. Built-in s...
Drying oven incubator T-S212DOI
Drying oven incubator is a dual functioning oven-incubator with a rapid heating and working temperature of 5 °C to 80 °C for incubator and 80 °C to 300 °C for the oven. Built-in s...
Drying oven incubator T-S213DOI
Drying oven incubator is a dual functioning oven-incubator with a rapid heating and working temperature of 5 °C to 80 °C for incubator and 80 °C to 300 °C for the oven. Built-in s...
Drying Oven Incubator T-S210DOI
Drying oven incubator is a dual functioning oven-incubator with a rapid heating and working temperature of 5 °C to 80 °C for incubator and 80 °C to 300 °C for the oven. Built-in s...
Drying oven incubator T-S211DOI
Drying oven incubator is a dual functioning oven-incubator with a rapid heating and working temperature of 5 °C to 80 °C for incubator and 80 °C to 300 °C for the oven. Built-in s...
Standards
ISO 11133:2014-Microbiology of food, animal feed and water-Preparation, production, storage and performance testing of culture media
Complies with the above standards, but is not limited to them.
Features
1. Smooth stainless chamber with rounded corners is easy to clean.
2. Good insulation and door gasket reduce heat loss.
3. Adjustable, removable shelves accommodate varied loads.
4. Stackable or under-bench models help manage laboratory space.
5. Data logging and 220V or 110V options are available.
FAQ
What is the Drying Oven Incubator mainly used for?
The Drying Oven Incubator is used to maintain samples at a stable, controlled temperature for incubation, culturing, warming and general biological work. It is widely used in microbiology, clinical, food, pharmaceutical and research laboratories.
What standards does the Drying Oven Incubator comply with?
The unit is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for laboratory incubators. Test and culture procedures should follow the applicable standard methods. Compliance documentation can be provided on request.
How long is the warranty period?
We provide a 12-month limited warranty on the instrument and its key working parts. Consumables, accessories and parts subject to normal wear are excluded, as is damage caused by incorrect operation or maintenance. An extended service plan is available on request.
How easy is the Drying Oven Incubator to use?
Day-to-day use is simple, with clear prompts and pre-set functions reducing manual steps. New operators should review the manual and complete a short familiarisation. Our technical team offers remote support during the first runs.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Does the Drying Oven Incubator need calibration or verification?
The unit is calibrated and tested before delivery. For ongoing accuracy, verify it against traceable reference standards every 6 to 12 months, or according to the laboratory quality schedule. We can arrange calibration service and certificates where required.
Are consumables and spare parts easy to obtain?
Filters, seals, probes and similar items are standard and can be supplied through our channel. Customers may also source equivalent items that meet the specification. Provide the model and serial number to confirm compatibility before ordering.
Can the Drying Oven Incubator be customised?
Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.
Is installation and commissioning included?
The unit is delivered ready for set-up, with clear commissioning steps in the manual. We provide remote technical support during installation. For larger or regulated systems, a factory-trained engineer can attend on site on request.
What should be avoided when using the Drying Oven Incubator?
Flammable, volatile or corrosive materials should not be placed in a standard incubator, and pathogenic agents require containment. Avoid overloading and clean spills promptly. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.