Introduction
3-position laboratory hot plate is a versatile heating device designed for simultaneous heating of three separate samples or containers in a laboratory setting. It typically features a flat, heated surface with three designated areas where laboratory glassware or containers can be placed. Each position can be controlled independently, allowing for precise temperature regulation for different experiments or processes running simultaneously. hot plates are commonly used in chemistry and biology laboratories for tasks such as heating solutions, evaporating solvents, or maintaining specific temperatures in experiments.
3 – Position hotplate T-S253THP
3 - Position hotplate is a white ceramic top hotplate with a PID controlled temperature with 0.1°C resolution of 400 °C for uniform heat distribution (temperature deviation ≤ ±2°C)....
3 – Position hotplate T-S252THP
3 - Position hotplate is a white ceramic top hotplate with a PID controlled temperature with 0.1°C resolution of 400 °C for uniform heat distribution (temperature deviation ≤ ±2°C)....
3 – Position Hotplate T-S250THP
3 - Position hotplate THP is a white ceramic top hotplate with a PID controlled temperature with 0.1°C resolution of 400 °C for uniform heat distribution (temperature deviation ≤ ±2...
3 – Position hotplate T-S251THP
3 - Position hotplate is a white ceramic top hotplate with a PID controlled temperature with 0.1°C resolution of 400 °C for uniform heat distribution (temperature deviation ≤ ±2°C)....
Standards
IEC 61010-2-010:2020-Particular requirements for laboratory equipment for the heating of materials
Complies with the above standards, but is not limited to them.
Features
1. Separate hot and stir controls simplify combined procedures.
2. Precise temperature control with a clear digital or analog setting.
3. Support rod and clamp options hold probes and glassware.
4. Automatic shut-off and timer support safe operation.
5. Low-profile design and non-slip feet keep the unit stable.
FAQ
What is the 3 position hot plate mainly used for?
The 3 position hot plate is used to heat, warm or maintain samples and glassware at controlled temperatures. It supports routine chemistry, digestion, warming and sample preparation in teaching, research and quality-control laboratories.
What standards does the 3 position hot plate comply with?
The unit is designed with reference to IEC 61010 electrical safety and relevant GB/T standards for laboratory heating equipment. Procedures should follow the applicable methods. Compliance documentation can be provided on request.
What does the warranty cover?
The complete unit carries a 12-month warranty from delivery, covering the main body, core components and controller against manufacturing defects. Consumables and wearing parts such as filters, seals and probes are not covered. Damage from misuse, improper power or unauthorised repair is excluded, and extended warranty can be quoted.
Is the 3 position hot plate difficult to operate?
Day-to-day use is simple, with clear prompts and pre-set functions reducing manual steps. New operators should review the manual and complete a short familiarisation. Our technical team offers remote support during the first runs.
How long does delivery usually take?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Does the 3 position hot plate need calibration or verification?
Regular calibration keeps measurements within the stated accuracy; an annual check is typical, with shorter intervals for heavy or regulated use. Reference standards and procedures are described in the manual. We can quote calibration with certificates.
Are consumables and spare parts easy to obtain?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Can the 3 position hot plate be customised?
A range of options is available to match the application, such as alternative settings, fittings, data outputs or power supply. We confirm each option and its effect on price and schedule up front. Larger custom builds can be discussed.
Do you provide on-site installation?
Most models can be commissioned by following the manual, including positioning, connections, checks and a first test run. Remote guidance is available during start-up. On-site installation, commissioning and training can be arranged separately where required.
What should be avoided when using the 3 position hot plate?
Do not heat flammable materials directly, exceed the surface rating or leave heating unattended. Use heat-resistant gloves and suitable glassware. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.