Introduction
Gas Chromatograph ensures stable gas flow through controlled management for consistent results. They feature dual detection with two detectors, improving sensitivity and analytical capability. These chromatographs include efficient temperature adjustments to facilitate quick analyses. They have self-monitoring functions to support smooth operation and quick issue detection. Our Gas Chromatograph accommodates multiple detectors and columns, offering versatile options for analysis.
Gas Chromatography Triple Quadrupole Mass Spectrometer LGCMS-T2010
Gas Chromatography Triple Quadrupole Mass Spectrometer features a powerful pumping system with a speed of 65 m³/h. This gas chromatography unit supports sample volumes from 0.1 μL to 2...
Gas Chromatograph T-CG-S2100
Gas Chromatography T-CG-1030
Gas Chromatography T-CG-1010
Gas Chromatography T-CG-1020
Gas Chromatography T-S250GC
Gas Chromatography is equipped with a 9 phase 10 platform temperature programme with a temperature range of 5 °C to 400 °C. Features an APC controlled Flame Ionization Detector (FID) ...
Gas Chromatography T-S251GC
Gas Chromatography is equipped with a 16-phase temperature programme with a temperature range of RT to 450 °C. Features an APC controlled Flame Ionization Detector (FID) with high sensi...
Gas Chromatograph-Mass Spectrometer GC2022
Gas Chromatograph-Mass Spectrometer offers a flow rate of 20 to 50 ml/min for precise analysis of complex mixtures. It is equipped with a quadrupole, pre-filter, and electron multiplier f...
Standards
ISO 6974-Natural gas-Determination of composition with defined uncertainty by gas chromatography
USP General Chapter <621>-Chromatography
European Pharmacopoeia 2.2.46-Chromatographic separation techniques
WHO TRS 1025 Annex 4-Good chromatography practices
Complies with the above standards, but is not limited to them.
Features
1. Choice of detectors suits different compounds and sensitivities.
2. Automated sampler improves throughput and precision.
3. Data export and audit options support regulated laboratories.
4. GC, HPLC and modular configurations cover many applications.
5. Gas and temperature safety interlocks protect the system.
FAQ
What is the Gas Chromatography mainly used for?
The Gas Chromatography is used to separate, identify and quantify components in a mixture. It supports chemical analysis, quality control, environmental testing, food safety and pharmaceutical work requiring selective detection.
Which standards and regulations apply to the Gas Chromatography?
The instrument is designed with reference to IEC 61010 electrical safety, applicable chromatography standards and relevant GB/T methods. Columns and procedures should follow validated methods. Compliance documentation can be provided on request.
What does the warranty cover?
The complete unit carries a 12-month warranty from delivery, covering the main body, core components and controller against manufacturing defects. Consumables and wearing parts such as filters, seals and probes are not covered. Damage from misuse, improper power or unauthorised repair is excluded, and extended warranty can be quoted.
Is the Gas Chromatography difficult to operate?
Routine operation is straightforward and is covered in the user manual, including setup, daily use and basic maintenance. Staff with basic laboratory experience can run it after a short familiarisation. We provide remote guidance and can arrange on-site training where required.
How long does delivery usually take?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Is calibration included?
Regular calibration keeps measurements within the stated accuracy; an annual check is typical, with shorter intervals for heavy or regulated use. Reference standards and procedures are described in the manual. We can quote calibration with certificates.
Are consumables and spare parts easy to obtain?
No proprietary consumable contract is required; standard parts are available from us and common laboratory suppliers. Our service team can supply a recommended parts list for the model. Most routine spares are held for quick delivery.
Can it be adapted to our requirements?
The standard model can be configured with selected accessories and operating options to suit the task. Non-standard requests are assessed before quotation so the final build is clearly defined. We confirm details before production.
Is installation and commissioning included?
Benchtop and standard units typically require only placement and connection before use, while larger systems may need professional commissioning. We confirm the installation requirements at order stage. On-site service and training can be provided if needed.
What maintenance and safety points matter?
Do not use incompatible gases or solvents, block gas paths or run without carrier gas. Handle columns and detectors per their limits. Follow laboratory safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.