Introduction
An oxygen concentrator is a medical device used to provide the oxygen-enriched air to the patients with the respiratory conditions, and it is used in the hospitals, the home care, the clinical, and the many other applications. The oxygen concentrator concentrates the oxygen from the ambient air by the pressure swing adsorption (PSA), in which the nitrogen is adsorbed by the zeolite material, and it provides the oxygen-enriched air with the concentrations up to about 90 percent; the oxygen concentrator consists of the compressor, the zeolite beds, the valves, the flow control, the humidifier, and the controls, and it provides the continuous oxygen flow; the oxygen concentrator is used for the oxygen therapy for the patients with the chronic obstructive pulmonary disease (COPD), for the oxygen supplementation, for the home care, for the clinical use, and for many other applications, and it is available in various flow rates and configurations; the oxygen concentrator is an essential medical device for the oxygen therapy. Oxygen concentrators are used in the hospitals, in the home care, in the clinical, in the emergency, and for many other applications. With their oxygen concentration, oxygen concentrators are essential for the oxygen therapy.
Oxygen Concentrator LOXC-T2014
Oxygen Concentrator offers 10-liter capacity to deliver high-purity oxygen, supporting a wide range of respiratory needs. With an adjustable flow rate from 0.5 to 10L/min, it provides ta...
Oxygen Concentrator LOXC-T2013
Oxygen Concentrator deliver medical-grade oxygen with a concentration of 93% ± 3%, supporting flow rates from 1 to 5 liters per minute. With a 5-liter capacity, it is ideal for patients...
Oxygen Concentrator LOXC-T2012
Oxygen Concentrator delivers a consistent oxygen flow rate ranging from 0.5 to 5 liters per minute, with an oxygen concentration of 93% ± 3%. It operates quietly with a noise level of l...
Oxygen Concentrator LOXC-T2011
Oxygen Concentrator offers adjustable oxygen flow rate ranging from 1 to 7 capacity, it ensures a consistent oxygen concentration of 93% ± 3% for reliable therapy. This user-friendly un...
Oxygen Concentrator LOXC-T2010
Oxygen Concentrator delivers a steady oxygen flow rate ranging from 1 to 7 liters per minute. With a noise level less than equal to 60 dB, it ensures quiet operation, suitable for both h...
Standards
ISO 80601-2-69:2020-Medical electrical equipment-Particular requirements for basic safety and essential performance of oxygen concentrator equipment
Complies with the above standards, but is not limited to them.
Features
1. Oxygen concentrator for medical oxygen.
2. PSA concentrator delivering oxygen.
3. For hospitals and home care.
4. Includes concentrator, tubing and manual.
5. Produces concentrated oxygen from air.
FAQ
Q1: What scenarios is this concentrator used for?
A: It produces concentrated oxygen from air using pressure-swing adsorption for medical oxygen supply in facilities and home care.
Q2: What standards does it comply with?
A: It follows IEC 60601-1 and ISO 80601-2-69 and related GB/T medical standards, with oxygen purity verified. The relevant parameters are verified during final inspection before shipment, and compliance documentation or test reports can be provided on request for your quality records.
Q3: What is the warranty?
A: It carries a 12 to 24 month warranty covering the unit. Filters and sieve beds are wear parts. Damage from misuse is excluded.
Q4: Is it hard to operate?
A: Operation is simple after training: switch on, set flow and monitor. We provide a manual and guidance.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: Performance should be verified periodically using calibrated reference standards, with results logged in the equipment record. Most users perform this check every 6 to 12 months or according to their internal quality schedule. We provide the procedure, reference materials and formal calibration service if required.
Q7: Are consumables universal?
A: These are disposable consumables and should be replaced after use to avoid cross-contamination. They are standard laboratory items available directly from us or from general laboratory suppliers, which keeps running costs low. We recommend keeping a small stock, and bulk pricing is available for regular orders.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include flow capacity, dual flow and accessories. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: No installation is required. The unit is delivered fully assembled and factory tested, so you only need to place it on a level surface, connect power and follow the quick-start guide. An illustrated manual and setup video are included, and our engineers provide remote guidance if needed.
Q10: What environments are compatible?
A: It operates in ventilated spaces within temperature and altitude limits. It is not for supplying anesthesia, non-medical gases, or use beyond rated altitude and flow.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.