Table water curtain spray cabinet

Introduction

A table water curtain spray cabinet is a bench-top spray test cabinet with a water curtain, used for the testing of the products by the water spray, and it is used in the laboratories, the electronics, the automotive, and the many other industries for the testing of the water resistance and the ingress protection. The table water curtain spray cabinet consists of a bench-top enclosure, a water supply and a spray system with the nozzles, a water curtain, which is a continuous sheet of the water that flows over the test area, a water circulation and a drainage system, and a control system, and it sprays the test article with the water, with the water curtain providing the additional coverage, and it is used for the testing of the ingress protection of the products, for the testing of the water resistance of the enclosures and the seals, for the testing of the products under the spray, and for many other applications, following the standard test methods; the table water curtain spray cabinet provides a controlled and a reproducible test, with features such as the adjustable spray parameters, and it is compact and designed for the bench-top use; the table water curtain spray cabinet is an essential equipment for the water resistance testing in the laboratory. Table water curtain spray cabinets are used in the laboratories, in the electronics industry, in the automotive industry, in the product testing, and for many other applications. With their water curtain, table water curtain spray cabinets are essential for the water resistance testing.

Table Water-T20urtain Spray Cabinet LTWS-T2010

Table Water-curtain Spray Cabinet offers an exhaust air rate of 12m/s for efficient removal of overspray and maintaining a clean working environment. The instrument has a centrifugal exh...

Send Inquiry View more

Standards

ISO 14917:2017-Thermal spraying-Terminology, classification

Complies with the above standards, but is not limited to them.

Features

1. Table water curtain spray cabinet for bench-top spray painting and coating with water-borne overspray collection.

2. Compact benchtop spray booth with water curtain to capture overspray, filter air and provide ventilated spraying area.

3. Suitable for small parts painting, hobby, crafts, model making, small industrial, educational and laboratory use.

4. Includes cabinet body, water curtain system, exhaust fan, water pump, filters, lighting and operation manual.

5. Supports spray painting of small parts, models, crafts and samples with water-based or solvent-based paints in controlled area.

FAQ

Q1: What testing scenarios is this cabinet mainly applied to?

A: The table water curtain spray cabinet (benchtop water curtain spray booth) is used in small parts painting, hobby and model making, crafts, small industrial finishing, educational labs, and research laboratories to provide a compact, bench-top ventilated enclosure for spray painting and coating, with a water curtain that captures paint overspray (particles and solvent vapors) and an exhaust fan that pulls filtered air through the booth, protecting the operator and workspace from paint fumes and overspray. It supports small parts painting (automotive small parts, hardware, furniture components, metal/plastic parts - spray finishing with aerosol or spray gun), model making and hobby (scale models (aircraft, cars, ships), miniatures, RC models, gaming miniatures - airbrushing and spray painting with detail), crafts and DIY (ceramics, wood crafts, artwork, custom painting), small industrial/prototyping (sample spraying, color matching, small batch finishing, R&D coating trials), educational (art/design schools, technical training, student projects), and laboratory (coating samples for testing (paint formulation, adhesion tests, color development), spray application of experimental coatings). The water curtain captures overspray: paint particles hit the flowing water film and are washed into a sump (where paint sludge accumulates), while air is exhausted through filters/water. This reduces cleanup and protects the operator from inhalation of paint particles and solvents (though solvent vapors may still require proper ventilation/respirator depending on paint type).

Q2: What standards does the cabinet comply with?

A: The table water curtain spray cabinet follows relevant ISO, OSHA, NFPA, CE and GB/T standards including applicable ventilation and spray booth standards (NFPA 33 (standard for spray application using flammable and combustible materials), OSHA 29 CFR 1910.94 (ventilation for spray finishing), EN 12941 (respiratory protective devices - related), and GB/T standards for spray booths. For solvent-based paints, ensure explosion-proof electrical components (fan, pump, light) if flammable solvents are used (ATEX/IECEx for EU, OSHA Class I Division for US). The water curtain system should have proper water flow, filtration, and exhaust rate. For occupational safety, follow local regulations on indoor air quality, VOC emissions, and hazardous waste (paint sludge, contaminated water). Calibration/verification includes exhaust airflow measurement (anemometer/balometer) and water flow check.

Q3: What is the warranty period for the whole cabinet and key components?

A: The whole table water curtain spray cabinet is covered by a 12-month warranty. The cabinet body, water curtain system, exhaust fan, water pump, filters, and lighting are covered, while filters (replaceable - capture paint particles), water pump (wear part - can clog with paint sludge), lighting bulbs, and seals are consumables/accessories. Damage from improper use, lack of water (running dry - pump damage, fire risk for solvent paints), pump clogging (paint sludge buildup - clean sump regularly), electrical issues (using non-explosion-proof components with flammable solvents - fire/explosion hazard), corrosion (water/paint residue - clean regularly), or unauthorized repair is excluded. Extended warranty may be available. Fans/pumps last 3-8 years; filters need regular replacement (depending on usage).

Q4: Is this device difficult to operate? Is professional training required?

A: Operation requires basic training on spray painting and safety. We provide operation manuals. Proper setup (place on stable, level bench near water source/drain (or use recirculating water tank), ensure adequate space for exhaust ducting (vent to outside - do not recirculate exhaust indoors for solvent-based paints; for water-based, may use HEPA filtration), connect power (ensure explosion-proof if using solvent-based paints - fan, pump, light must be rated for hazardous location; do not use standard electrical with flammable solvents), fill water sump to proper level (water curtain must flow evenly across back panel; check water level before each use), ensure exhaust fan is working (verify airflow before spraying), sample preparation (thin paint per manufacturer (spray gun or aerosol), prepare parts (clean, mask, hang or place on turntable/grate), wear PPE (respirator (N95 for particulates, organic vapor cartridge for solvents), safety glasses, gloves, protective clothing; even with water curtain, solvent vapors may be present - use appropriate respirator), operation (turn on exhaust fan and water pump BEFORE spraying (verify water curtain flowing, air moving), spray parts inside cabinet (keep spray gun 15-25 cm from surface, use even strokes; do not spray outside cabinet opening; avoid spraying directly at water curtain (wastes paint, causes excess sludge)), monitor water level (evaporation/splashing - top up as needed; do not let pump run dry), post-spraying (leave fan running for 5-10 min after spraying to clear fumes, then turn off), clean parts, maintenance (regular cleaning (after each use or daily: remove paint sludge from sump (scrape/filter; dispose as hazardous waste per local regulations - paint sludge is often hazardous), clean water curtain nozzles (clog with paint - use brush/water), clean filters (replace when clogged (reduced airflow; pre-filters can be cleaned, main filters replaced), change water (when heavily contaminated (paint buildup, odor; dispose contaminated water per regulations - do not pour down drain without treatment), inspect pump (clean intake filter, ensure no clogging), check fan (clean blades, verify airflow), troubleshooting (poor overspray capture (water flow too low (pump clogged, low water level), exhaust fan weak (clogged filters, fan failing), spray technique (too far, too much paint) - check water/fan, improve technique), water not flowing (pump clogged, low water, pump failure - clean pump, add water, service), excessive fumes (exhaust inadequate, solvent-based paint without proper ventilation/explosion-proof, filters clogged - increase ventilation, use respirator, clean/replace filters, consider solvent recovery), pump noisy/failing (clogged, running dry, worn - clean, add water, replace), water overflow (sump clogged, too much water, spray volume too high - clean sump, reduce water, spray less), and safety (FIRE/EXPLOSION HAZARD (solvent-based paints contain flammable solvents (xylene, toluene, acetone, MEK) - spray mist and vapors are flammable/explosive; MUST use explosion-proof electrical components (fan, pump, light) if spraying solvent-based paints; ensure proper exhaust ventilation (air changes per hour per NFPA 33); no ignition sources (no open flames, no sparks, use non-sparking tools); static electricity (ground spray gun and parts); have fire extinguisher (Class B for solvents) nearby; for water-based paints, lower fire risk but still follow safety), INHALATION HAZARD (paint particles and solvent vapors cause respiratory issues (asthma, lung damage, neurological effects from solvents); water curtain captures particles but NOT all solvent vapors; ALWAYS wear appropriate respirator (organic vapor cartridge for solvents, N95/P100 for particulates); ensure exhaust to outside; do not rely solely on water curtain for vapor protection), SKIN/EYE CONTACT (paints/solvents irritate skin/eyes; wear gloves (nitrile for solvents), safety glasses, protective clothing; wash skin after contact; have eyewash station), HAZARDOUS WASTE (paint sludge and contaminated water are hazardous waste (contains heavy metals, solvents, VOCs); do not pour down drain; dispose per local hazardous waste regulations (collect, label, use licensed waste hauler); some water-based paints may be less hazardous but still require proper disposal), NOISE (exhaust fan can be noisy - hearing protection if >85 dB), electrical (water + electricity hazard - ensure proper grounding, GFCI, explosion-proof if needed; do not handle with wet hands), ventilation (exhaust must vent to outside (not into room); for benchtop units, use ducting to window or exhaust port; do not use in unventilated small room) are CRITICAL for safe spray painting.

Q5: What is the typical lead-time for order delivery?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is regular calibration required? What is the recommended calibration cycle?

A: Exhaust airflow verification recommended every 3-6 months using anemometer/balometer (verify face velocity at cabinet opening meets recommended level (typically 0.5-1.0 m/s (100-200 fpm) for spray booths per NFPA 33/OSHA; if below, clean/replace filters, service fan). Water flow check before each use (verify curtain flows evenly, no dry spots). Filter replacement based on pressure drop or visual clogging (typically every 1-3 months depending on usage; pre-filters may be cleaned). Pump maintenance (clean intake filter, check for clogs) every 1-4 weeks. For occupational safety compliance, follow local regulations (OSHA, NFPA) and maintain records (airflow measurements, filter changes, maintenance). Explosion-proof electrical inspection annually (if solvent-based). Water quality/sludge removal per usage. These are ventilation/safety equipment - regular maintenance ensures operator protection and regulatory compliance.

Q7: Are supporting consumables universal?

A: Filters (pre-filters, main filters, HEPA, activated carbon - specific to cabinet model/size), water pump (replacement - specific to model), lighting (LED/fluorescent bulbs - standard or specific), spray gun/airbrush (user-supplied or optional - standard), respirator cartridges (organic vapor, P100 - standard safety supplies), paint strainers, cleaning supplies, and hazardous waste containers are available from industrial/safety supply companies, though filters and pumps are often cabinet-specific (use OEM or certified compatible to maintain airflow and warranty). Long-term consumable cost includes filters (regular replacement), pump (periodic), and hazardous waste disposal (ongoing cost - paint sludge/water).

Q8: Can I customize parameters or supporting accessories?

A: Customization includes size (small benchtop (60-90 cm wide - for models/hobby/small parts), medium (90-120 cm - for small industrial), large (120+ cm - for bigger parts)), explosion-proof rating (standard (for water-based paints only - lower cost) or explosion-proof (ATEX/IECEx/Class I Div - for solvent-based flammable paints; fan, pump, light, switches all rated; essential for safety)), filtration (water curtain only (basic particle capture), water curtain + pre-filter + main filter (better), water curtain + HEPA + activated carbon (for VOC/solvent vapor capture - better air quality, may allow recirculation for water-based), exhaust (ducted to outside (standard, best for solvents) or recirculating with HEPA/Carbon (for water-based, no ducting needed)), features (turntable/rotating grate (for even coating of parts), built-in airbrush holder, LED lighting (explosion-proof if needed), automatic water level control, sludge collection tray, digital airflow monitor, timer), construction (stainless steel (corrosion-resistant, easy to clean - recommended for water/paint), galvanized steel (lower cost), powder-coated steel), accessories (extra filters, replacement pump, spray gun, air compressor, respirator, exhaust ducting, turntable, calibration certificate), certifications (CE, OSHA/NFPA compliance, ATEX/IECEx), language and accessories. Additional filters, pumps, and accessories can be ordered separately.

Q9: Does the purchase include on-site installation and commissioning service?

A: Standard delivery includes table water curtain spray cabinet, fan, pump, filters, lighting, power cord, and instruction manual. On-site installation (exhaust ducting, water hookup, electrical) and safety training are not included for standard orders but are strongly recommended (especially for explosion-proof models and solvent-based paint use - can be arranged at additional cost). For self-installation: place on bench, connect water (fill sump), connect exhaust duct to outside, plug in (ensure explosion-proof if solvents), test fan/pump, verify airflow before use. Always have proper PPE and fire safety equipment.

Q10: What types of samples are compatible with this equipment?

A: The table water curtain spray cabinet is for spray painting/coating various small parts and materials including metal parts (automotive hardware, brackets, custom metalwork, prototypes - primer, paint, clearcoat), plastic parts (model kits, RC parts, custom plastic components, 3D printed parts - paint, primer), wood (crafts, furniture parts, models - stain, paint, lacquer), ceramic/pottery (glazes, underglazes, overglazes - spray application), models/miniatures (scale models (aircraft, cars, ships, military), gaming miniatures, dollhouse miniatures - airbrush detailing), artwork (canvas, mixed media, custom artwork - spray paint, varnish), and experimental coatings (R&D samples, color matching, paint formulation trials - spray application of test coatings). Compatible paint types: water-based paints (acrylic latex, waterborne polyurethane, craft acrylics - lower fire risk, easier cleanup), solvent-based paints (enamel, lacquer, epoxy, urethane, automotive paints - REQUIRES explosion-proof cabinet and proper ventilation/respirator due to flammable solvents), aerosols (spray cans - convenient, but still produce overspray/fumes), and airbrush paints (acrylic, enamel, lacquer - for detail work). NOT compatible with: Large parts beyond cabinet opening (use full-size spray booth), powder coating (requires different equipment (electrostatic spray gun + curing oven - not water curtain), high-volume production (benchtop unit is for small batch/hobby - use industrial spray booth for production), extremely toxic/radioactive materials (require specialized containment), materials that react with water (some isocyanates, reactive chemicals - consult SDS; water curtain may not be appropriate), and spraying without proper exhaust/PPE (safety hazard). IMPORTANT: Water curtain spray cabinet fundamentals: (1) How it works: A pump circulates water from a sump at the bottom, creating a continuous water curtain (film) flowing down the back panel of the booth. An exhaust fan pulls air through the booth opening (face velocity ~0.5-1.0 m/s) and through the water curtain/filters. When spray painting inside: - Paint particles (overspray) are carried by airflow toward the back, hit the water curtain, and are washed down into the sump (paint sludge accumulates in sump or filter). - Air passes through water (scrubbing some particulates and soluble vapors) and filters, then is exhausted (ducted outside or recirculated with HEPA/Carbon). - The water curtain captures most paint SOLIDS (particles), but is less effective at capturing solvent VAPORS (VOCs) - these pass through with exhaust air. For solvent-based paints, proper exhaust to outside and respiratory protection are essential. (2) Water-based vs solvent-based: - Water-based paints (acrylic, latex): Lower fire risk, lower VOC, easier cleanup (water), less hazardous waste. Standard (non-explosion-proof) cabinet may be acceptable (but still ventilate). - Solvent-based paints (enamel, lacquer, urethane, automotive): Contain flammable solvents (xylene, toluene, acetone, MEK, naphtha). Spray mist and vapors are FLAMMABLE/EXPLOSIVE. MUST use explosion-proof electrical components (fan, pump, light, switches) rated for hazardous locations (ATEX/IECEx Zone 1/2 or OSHA Class I Division 1/2). Ensure proper exhaust (NFPA 33 specifies airflow rates), no ignition sources, grounding, fire extinguisher. Even with explosion-proof cabinet, wear organic vapor respirator. (3) Key safety considerations: - Fire/explosion: Solvent-based paints are the biggest risk. The spray mist can form explosive mixtures with air. Explosion-proof electrical is mandatory. - Inhalation: Paint particles (isocyanates in polyurethane paints are particularly toxic - can cause asthma, lung damage) and solvent vapors (neurological, liver/kidney effects). Water curtain does NOT fully protect from vapors. Wear appropriate respirator (organic vapor cartridge for solvents, P100 for particulates, supplied-air for isocyanates in some cases). - Hazardous waste: Paint sludge (captured overspray) and contaminated water contain heavy metals (pigments), solvents, VOCs. Classified as hazardous waste in most jurisdictions. Do not pour down drain. Collect, label, dispose via licensed hazardous waste hauler. - Ventilation: Exhaust must go outside. Do not recirculate exhaust for solvent-based paints (fire/health risk). For water-based with HEPA/Carbon, recirculation may be acceptable. - PPE: Respirator, safety glasses, gloves (nitrile for solvents), protective clothing, hair cover. - Fire extinguisher: Class B (for flammable liquids) or ABC extinguisher nearby. (4) Maintenance: - Clean sump regularly (remove paint sludge - when sludge builds up, it reduces water quality, clogs pump, causes odor). - Clean/replace filters (clogged filters reduce airflow, reducing overspray capture). - Check water level (pump can run dry and burn out). - Clean water curtain nozzles (clog with paint). - Inspect pump and fan. - Dispose of waste properly. (5) Limitations: - Benchtop size: Only for small parts/models, not production. - Water curtain captures particles better than vapors. - Not for powder coating. - Requires water source/drain or regular water changes. - Noise from fan/exhaust. - For professional/industrial use, a full-size spray booth (with proper fire suppression, ventilation, codes) may be required by local regulations - verify with local fire marshal/OSHA. (6) Common errors: - Using solvent-based paint in non-explosion-proof cabinet (FIRE/EXPLOSION risk). - Not wearing respirator (inhalation hazard). - Not exhausting to outside (fumes build up in room). - Not cleaning sump/filters (reduced performance, odor, pump damage). - Spraying too much/too fast (overwhelms water curtain, excess sludge, poor finish). - Pouring waste water down drain (illegal hazardous waste disposal). - Not grounding spray gun/parts (static spark - fire risk with solvents). - Using wrong respirator (dust mask for solvent vapors - inadequate; need organic vapor cartridge).