Digital lcr multimeter

Introduction

A digital LCR multimeter is an electronic test instrument used to measure the inductance (L), the capacitance (C), and the resistance (R) of the electronic components, as well as the other parameters, such as the impedance, the dissipation factor, and the quality factor, and it is used in the electronics, the electrical, and the research laboratories for the testing and the characterization of the components. The digital LCR multimeter consists of a test fixture or the test leads, a measurement circuit that applies the test signal and measures the response, a digital display, and a control, and it measures the parameters of the components, such as the capacitors, the inductors, and the resistors, at the test frequency, and it displays the values, with features such as the selection of the measurement parameters, the test frequency, the test voltage, and the accuracy; the LCR multimeter is used for the testing of the components, for the sorting and the matching of the components, for the quality control in the electronics manufacturing, for the troubleshooting of the circuits, for the characterization of the materials, and for many other applications, and it is available as the benchtop and the handheld instruments, with the various ranges and the accuracies, and it may include features such as the data logging and the connectivity; the digital LCR multimeter is an essential instrument in the electronics laboratory. Digital LCR multimeters are used in the electronics manufacturing, in the research and the development, in the repair and the service, in the educational institutions, and for many other applications. With their measurement of the L, C, and R, digital LCR multimeters are essential for the component testing.

Digital LCR Multimeter LDLM-T2010

Digital a frequency range of 10 Hz to 100 KHz and 0.2% basic accuracy. It supports DC resistance and electrolytic capacitor testing, providing detailed and accurate analysis. The multime...

Send Inquiry View more

Standards

IEC 61010-2-033:2023-Safety requirements for electrical equipment for measurement-Particular requirements for hand-held multimeters and other meters

Complies with the above standards, but is not limited to them.

Features

1. Digital LCR multimeter for measuring inductance, capacitance and resistance.

2. Handheld or bench meter with test frequency selection and display.

3. For electronics, component testing and electrical maintenance.

4. Includes meter, test leads, battery and manual.

5. Measures L, C, R and related parameters of components.

FAQ

Q1: What scenarios is this meter used for?

A: It measures inductance, capacitance and resistance, often with dissipation factor and quality factor, for component checking, electronics repair and electrical maintenance at selectable test frequencies.

Q2: What standards does it comply with?

A: It follows IEC 61010 and IEC 61326 for safety and EMC and related GB/T standards, with accuracy verified by calibration.

Q3: What is the warranty?

A: The meter carries a 12 to 24 month warranty covering the electronics and display. Leads and batteries are consumables. Damage from over-voltage or unauthorized repair is excluded.

Q4: Is it hard to operate?

A: Operation is simple for trained users: connect leads, select function and frequency and read the value. We provide a manual and guidance.

Q5: What is the lead time?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is calibration required?

A: Performance should be verified periodically using calibrated reference standards, with results logged in the equipment record. Most users perform this check every 6 to 12 months or according to their internal quality schedule. We provide the procedure, reference materials and formal calibration service if required.

Q7: Are consumables universal?

A: Test leads and batteries are universal, while some fixtures are model-specific. Ongoing cost is minimal.

Q8: Can it be customized?

A: Yes, several configurations are available. Options include handheld or bench form, test frequency, precision, data logging and component fixtures. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.

Q9: Is installation included?

A: Standard delivery includes the meter, leads and manual. Installation is not required.

Q10: What components are compatible?

A: It handles inductors, capacitors and resistors within range. It is not for live high-energy circuits beyond rating, components beyond frequency limits, or direct high-voltage testing.