Introduction
A portable electrolyte analyzer is a handheld or small benchtop instrument used to measure the concentrations of electrolytes, such as sodium, potassium, chloride, and calcium, in biological samples, such as blood, serum, plasma, and urine, and it is used in point-of-care settings, clinics, emergency departments, and field settings for the rapid assessment of the electrolyte status. The portable electrolyte analyzer measures the concentrations of the ions by ion-selective electrode (ISE) methods, in which the sample is brought into contact with ion-selective electrodes, and the electrical potentials are measured and converted to ion concentrations; the portable analyzer is designed for portability and for use at the point of care, with a compact construction, a battery or mains operation, and disposable sensor cartridges or cards, and it requires a small sample volume, typically a few drops of blood, and it provides rapid results, within minutes, with features such as automatic calibration, quality control, and data management, and it is used for the analysis of whole blood, serum, and plasma; the portable electrolyte analyzer is used in the emergency and critical care, in the operating room, in the ambulance, in the clinic, in the field, in veterinary practice, and in many other settings, and it provides the electrolytes that are important for the rapid assessment of the patient status. Portable electrolyte analyzers are used by clinicians, by emergency and critical care personnel, by field medical teams, by veterinary practitioners, and for many other applications. With their rapid analysis, portable electrolyte analyzers are essential for point-of-care electrolyte testing.
Portable Electrolyte Analyzer LPEA-T2011
Portable Electrolyte Analyzer requires only a minimal sample volume of 90µL and delivers results in just 25 seconds. It supports plasma, serum, whole blood, urine, and samples, testing ...
Portable Electrolyte Analyzer LPEA-T2012
Portable Electrolyte Analyzer has the capacity to store up to 5,000 sample records, with options for further data expansion. It functions optimally at temperatures between 5°C and 40°C...
Portable Electrolyte Analyzer LPEA-T2010
Portable Electrolyte Analyzer operates efficiently within an ambient temperature range of 5°C to 40°C and relative humidity up to 80%. It supports up to 5,000 sample data storage, with...
Standards
IEC 61010-2-081:2015-Particular requirements for automatic and semi-automatic laboratory equipment for analysis and other purposes
Complies with the above standards, but is not limited to them.
Features
1. Portable electrolyte analyzer for field electrolyte measurement.
2. Handheld analyzer with ion-selective or electrochemical sensors.
3. For clinical, environmental and field electrolyte checks.
4. Includes analyzer, sensors, standards, battery and manual.
5. Measures electrolyte ions rapidly on site.
FAQ
Q1: What scenarios is this analyzer used for?
A: It measures electrolyte ions such as sodium, potassium, chloride or related ions in fluids on site, using electrochemical sensors for rapid clinical or environmental checks.
Q2: What standards does it comply with?
A: It follows relevant clinical laboratory, ion-selective electrode and GB/T standards, with calibration using traceable standards. Final inspection verifies these parameters before delivery, and the supporting compliance records are available when the order is placed.
Q3: What is the warranty?
A: The analyzer carries a 12 to 24 month warranty covering the unit. Sensors are wear parts. Damage from immersion beyond rating or misuse is excluded.
Q4: Is it hard to operate?
A: Operation requires trained staff for calibration and sample handling. We provide a manual and training.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: We recommend verification against traceable standards at regular intervals, typically every 6 to 12 months, and keeping calibration records for audit purposes. The manual describes the procedure, and reference standards are available from us. Accredited third-party calibration can also be arranged on request.
Q7: Are consumables universal?
A: Compatible items are single-use consumables designed for this application. They are widely available in standard sizes, and we can supply them directly or confirm the specification so you can source them locally. Ongoing cost is limited to these consumables, and there are no proprietary locked parts.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include ions, data logging, waterproof rating and field cases. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: Standard delivery includes the analyzer and manual. Installation is not required, with training available.
Q10: What samples are compatible?
A: It handles fluids within sensor ranges. It is not for non-aqueous samples, incompatible matrices, or ions beyond available sensors.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.