Introduction
A vacuum dental autoclave is a steam sterilizer designed for the sterilization of dental instruments and other heat-stable materials, using a vacuum cycle to remove the air from the chamber before the steam sterilization, and it is used in dental clinics, dental laboratories, and other healthcare settings. The vacuum dental autoclave operates by a pre-vacuum cycle, in which the air is removed from the chamber by a vacuum pump, and then steam is admitted, allowing the steam to penetrate the wrapped instruments and the porous materials effectively, and the sterilization is performed at a high temperature, typically 121 or 134 degrees Celsius, for a specified time, and after the sterilization, the steam is exhausted and the chamber is dried by a vacuum; the vacuum cycle improves the penetration of the steam and the sterilization efficiency, and it allows the sterilization of wrapped and hollow instruments, and the autoclave consists of a chamber, a steam generator, a vacuum pump, a control system, and a display, and it provides features such as programmable cycles, drying, and a printer for the documentation of the cycles; the vacuum dental autoclave is used for the sterilization of dental handpieces, burs, instruments, and other materials, and it is an essential instrument for infection control in dentistry. Vacuum dental autoclaves are used in dental clinics and practices, in dental laboratories, in oral surgery, in veterinary dentistry, and in many other applications. With their effective sterilization, vacuum dental autoclaves are essential for dental instrument sterilization.
Vacuum Dental Autoclave LVDA-T2012
Vacuum Dental Autoclave features a capacity of 45 mini printer for easy documentation. The loading device is a circle type with three trays for convenient arrangement of instruments. Its...
Vacuum Dental Autoclave LVDA-T2011
Vacuum Dental Autoclave features a capacity of 23 and post-vacuum technology to eliminate air pockets, ensuring thorough steam penetration and effective drying. The autoclave has various...
Vacuum Dental Autoclave LVDA-T2010
Vacuum Dental Autoclave with a capacity of 23 liters, operates at a sterilization temperature of 134°C. It conducts a variety of essential tests, including the Bowie-Dick (BD) test, tes...
Standards
IEC 61010-2-040:2020-Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
ISO 17665-1:2006-Sterilization of health-care products-Moist heat-Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
Complies with the above standards, but is not limited to them.
Features
1. Vacuum dental autoclave for sterilizing dental instruments.
2. Vacuum steam sterilizer with pre- and post-vacuum cycles.
3. For dental clinics and medical practices.
4. Includes autoclave, trays, printer option and manual.
5. Sterilizes wrapped and hollow instruments reliably.
FAQ
Q1: What scenarios is this autoclave used for?
A: It sterilizes wrapped, hollow and porous dental instruments using vacuum-assisted steam cycles, removing air for reliable sterilization in dental and medical clinics.
Q2: What standards does it comply with?
A: It follows EN 13060, ISO 17665, related medical device and GB/T standards, with cycles validated and temperature verified.
Q3: What is the warranty?
A: The autoclave carries a 12 to 24 month warranty covering the chamber and controls. Gaskets and filters are wear parts. Damage from over-pressure or misuse is excluded.
Q4: Is it hard to operate?
A: Operation is simple after training: load, select cycle and start. We provide a manual and training.
Q5: What is the lead time?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is calibration required?
A: Performance should be verified periodically using calibrated reference standards, with results logged in the equipment record. Most users perform this check every 6 to 12 months or according to their internal quality schedule. We provide the procedure, reference materials and formal calibration service if required.
Q7: Are consumables universal?
A: Filters and gaskets are model-specific, while water is universal. Ongoing cost includes filters.
Q8: Can it be customized?
A: Yes, several configurations are available. Options include chamber size, printers, water tanks and data logging. We can discuss further custom requirements, confirm feasibility and advise any effect on the schedule before the order is confirmed.
Q9: Is installation included?
A: Standard delivery includes the autoclave and manual. Installation is not usually required, with training available.
Q10: What instruments are compatible?
A: It handles heat- and moisture-stable dental instruments. It is not for heat-sensitive items, non-sterilizable materials, or loads beyond capacity.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.