Introduction
A vacuum concentrator centrifuge is a laboratory instrument that combines the centrifugation and the vacuum evaporation, used for the concentration of the samples by the removal of the solvent, and it is used in the biology, the chemistry, the pharmaceutical, and the many other laboratories. The vacuum concentrator centrifuge spins the samples in the rotors under the vacuum, with the heat applied, and the solvent evaporates and is collected, leaving the concentrated samples; the vacuum concentrator centrifuge consists of a centrifuge with the rotors, a vacuum chamber, a vacuum pump, a heating system, a cold trap for the collection of the solvent vapor, and the controls, and it provides the concentration, with features such as the programmable operation; the vacuum concentrator centrifuge is used for the concentration of the biological samples, for the concentration of the DNA and the RNA samples, for the removal of the solvents, for the drying of the samples, for the preparation of the samples, and for many other applications, and it is an essential instrument for the sample concentration. Vacuum concentrator centrifuges are used in the biology laboratories, in the chemistry laboratories, in the pharmaceutical industry, in the research, and for many other applications. With their vacuum evaporation, vacuum concentrator centrifuges are essential for the efficient sample concentration.
Vacuum Concentrator Centrifuge LVC-T2012
Vacuum Concentrator Centrifuge is a microcontroller unit with a maximum speed of 2000r/min. Enhanced with high torque brushless motor for stable operation and low noise. With a heating c...
Vacuum Concentrator Centrifuge LVC-T2020
Vacuum concentrator centrifuge is designed for rapid evaporation of water and organic solvents from samples. Its advanced features include an intuitive touch screen interface for real ti...
Vacuum Concentrator Centrifuge LVC-T2010
Vacuum concentrator centrifuge offers exquisite design, , controlled system and user-friendly operation interface. Centrifugal force is used to carry out the concentration of samples, va...
Vacuum Concentrator Centrifuge LVC-T2011
Vacuum concentrator centrifuge offers exquisite design, , controlled system and user-friendly operation interface. Centrifugal force is used to carry out the concentration of samples, va...
Standards
IEC 61010-2-020:2016-Particular requirements for laboratory centrifuges
Complies with the above standards, but is not limited to them.
Features
1. Vacuum concentrator centrifuge for rapid sample concentration under vacuum.
2. Combines centrifugal force with vacuum and heating for efficient solvent removal.
3. Suitable for molecular biology, analytical, pharmaceutical, chemical and research labs.
4. Includes centrifuge, vacuum system, heating, cold trap, controller and manual.
5. Supports sample concentration for HPLC, GC, LC-MS and analysis preparation.
FAQ
Q1: What testing scenarios is this centrifuge mainly applied to?
A: The vacuum concentrator centrifuge is used in molecular biology, analytical chemistry, pharmaceutical research, clinical diagnostics, environmental testing and research laboratories to rapidly concentrate liquid samples through combined centrifugal force, vacuum and gentle heating for solvent removal, preventing sample loss and bumping. It supports sample concentration for HPLC, GC and LC-MS analysis, nucleic acid and protein sample preparation, pharmaceutical metabolite and impurity concentration, environmental sample extract concentration, clinical sample preparation, and general laboratory solvent evaporation. The vacuum and centrifugal force enable efficient, low-temperature concentration of heat-sensitive samples without the bumping and cross-contamination associated with other evaporation methods. It is essential for molecular biology, analytical, pharmaceutical, clinical and research laboratories requiring rapid sample concentration under vacuum for analytical sample preparation, nucleic acid/protein concentration, metabolite analysis, environmental testing and research, where the combined centrifugal force, vacuum and heating enable efficient, gentle solvent removal without bumping or cross-contamination, supporting sample preparation for HPLC, GC, LC-MS and other analytical techniques in research, clinical and pharmaceutical applications requiring reliable, high-throughput sample concentration.
Q2: What standards does the centrifuge comply with?
A: The vacuum concentrator centrifuge complies with relevant IEC 61010 laboratory electrical safety standards and applicable GB/T standards for centrifuges and vacuum equipment. Analytical and clinical applications follow good laboratory practice and applicable biosafety guidelines. The centrifuge follows applicable safety standards for rotor integrity and imbalance protection. Users should verify compatibility with their specific sample types and protocols.
Q3: What is the warranty period for the whole machine and key components?
A: The whole vacuum concentrator is covered by a 12-month warranty. The centrifuge, rotor, vacuum system, heating, controller and housing are covered, while rotors, tubes, gaskets, filters and fuses are consumables or accessories. Damage from improper use, rotor overload, spillage or unauthorized repair is excluded. Extended service contracts are available for this specialized instrument.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation requires trained laboratory personnel familiar with centrifugation, vacuum systems and sample concentration. We provide operation manuals, training and application support. Proper rotor loading and balancing, vacuum operation, temperature setting, cold trap maintenance and safety procedures are important for effective concentration and safe operation.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular calibration required? What is the recommended calibration cycle?
A: Temperature calibration against a reference recommended every 6-12 months. Rotor inspection and speed verification periodically. Vacuum system performance checked. Cold trap maintenance per schedule. Routine cleaning recommended, particularly for chemical spills. Full system performance check annually.
Q7: Are supporting consumables universal?
A: Rotors, tubes, gaskets, filters and vacuum pump oil are available from specialized suppliers, though instrument-specific parts should be verified. Long-term consumable cost depends on sample volume and rotor usage.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes rotor type (microplate, tube, flask), capacity, temperature range, vacuum level, cold trap type, control features and accessories. Additional rotors, tubes and accessories can be ordered separately. Custom orders extend delivery lead-time.
Q9: Does the purchase include on-site installation and commissioning service?
A: Standard delivery includes the vacuum concentrator and accessories with an operation manual. On-site installation, calibration and training are not included for standard orders but can be arranged for laboratory setup. Remote guidance is provided.
Q10: What types of samples are compatible with this equipment?
A: The vacuum concentrator centrifuge concentrates liquid samples in compatible tubes, microplates or flasks within the rotor capacity, speed, temperature and vacuum specification. Different sample types (aqueous, organic) require different settings. Highly volatile or flammable solvents require proper cold trap and ventilation. Heat-sensitive samples require lower temperature settings. Users should balance the rotor properly, use appropriate tubes/plates for the rotor, set appropriate temperature and vacuum for the solvent, ensure the cold trap is properly cooled, avoid overfilling tubes, follow proper chemical safety for solvent vapors, and clean the chamber and rotor after use. The centrifuge should not be operated with an unbalanced rotor, and the lid safety interlock should be functional. For high-throughput use, proper sample tracking and cross-contamination prevention are important. The vacuum pump and cold trap should be maintained per manufacturer schedule, and solvent waste should be disposed of properly. For clinical or diagnostic use, assays should be validated and performed per established SOPs.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.