Introduction
A multi tube vortex mixer is a laboratory instrument that simultaneously vortexes, or vigorously mixes, the contents of multiple tubes at once, providing efficient and consistent mixing of multiple samples, and it is used in biology, chemistry, and clinical laboratories for sample preparation and homogenization. The instrument consists of a motor-driven mixing head with a platform or tray that holds multiple tubes, typically microcentrifuge tubes, test tubes, or culture tubes, in a vertical orientation; when the instrument is operated, the platform oscillates at high frequency, causing the contents of all the tubes to be mixed by the rapid, circular vortex motion, and the mixing speed and time can be adjusted, and the design ensures that all the tubes are mixed uniformly and simultaneously. Multi tube vortex mixers are available in various capacities, typically holding 10 to 50 or more tubes, and with features such as adjustable speed, timers, and interchangeable platforms for different tube sizes, and some models can be operated in continuous or touch modes. They are used for resuspending cells and pellets, for mixing reagents and samples, for homogenizing small samples, for dissolving solids, for mixing viscous solutions, for sample preparation in molecular biology, such as vortexing PCR tubes, for clinical sample mixing, for suspension of particles, and for many other applications where multiple tubes must be mixed efficiently. With their high throughput and consistency, multi tube vortex mixers are essential for efficient sample mixing in modern laboratories.
Multi-tube Vortex Mixer LMVM-T2010
Multi-tube Vortex Mixer is a compact benchtop design that delivers a speed range from 500 to 3000 rpm. It has a time setting range of 1 min to 99 min 59 sec, suitable for short and long ...
Multi-tube Vortex Mixer LMVM-T2015
Multi-tube Vortex Mixer offers a variable speed range of 500 to 2500 rpm, allowing for efficient mixing of a wide range of tube types and sample viscosities. The microprocessor control e...
Multi-tube Vortex Mixer LMVM-T2014
Multi-tube Vortex Mixer features a compact, bench-top design and offers an oscillation speed range of 500 to 2500 rpm. It is equipped with advanced a brushless DC motor that ensures reli...
Multi-tube Vortex Mixer LMVM-T2013
Multi-tube Vortex Mixer has an adjustable speed range of 1500 rpm to 3000 rpm. It features a digital display for precise monitoring and control of timing and speed parameters. The mixer ...
Multi-tube Vortex Mixer LMVM-T2012
Multi-tube Vortex Mixer has a speed range of 500 rpm to 3000 rpm. It uses a brushless DC motor for reliable and smooth operation. The mixer offers touch mode and continuous mode for oper...
Multi-tube Vortex Mixer LMVM-T2011
Multi-tube Vortex Mixer offers an adjustable speed range from 500 to 2500rpm for different mixing requirements. With a maximum load capacity of 4.5 kg, it is suitable for processing mult...
Multi-tube Vortex Mixer LMVM-T2010
Multi-tube Vortex Mixer is a display digital mixer operated with brushless DC motor and microprocessor controlled technology. It safely holds multiple test tubes and mixes up to 50 sampl...
Standards
IEC 61010-2-051:2018-Particular requirements for laboratory equipment for mixing and stirring
Complies with the above standards, but is not limited to them.
Features
1. Multi-tube vortex mixer for simultaneous vigorous mixing of multiple test tubes.
2. Multiple tube positions with adjustable speed for efficient sample mixing.
3. Suitable for clinical, biological, chemical, pharmaceutical and research laboratories.
4. Holds multiple tubes simultaneously for high-throughput sample mixing.
5. Includes mixer base, tube holder, rubber cup and operation manual.
FAQ
Q1: What testing scenarios is this mixer mainly applied to?
A: The multi-tube vortex mixer is used in clinical laboratories, biological research, chemical analysis, pharmaceutical testing, environmental monitoring and educational institutions to simultaneously vortex-mix multiple test tubes, microtubes or vials for sample resuspension, reagent mixing and extraction. It supports clinical sample mixing and resuspension, biological cell and reagent mixing, chemical solution and extract mixing, pharmaceutical sample preparation, environmental sample extraction, and general laboratory multi-tube mixing. The multiple tube holder enables simultaneous vigorous mixing of several samples, saving time compared with single-tube vortexing and providing consistent mixing across all tubes. It is essential for clinical, biological, chemical, pharmaceutical and research laboratories requiring simultaneous vortex mixing of multiple tubes for sample resuspension, reagent mixing, extraction, cell suspension and general laboratory mixing, where consistent, vigorous agitation across multiple tubes improves efficiency, reproducibility and throughput for clinical diagnostics, biological research, chemical analysis, pharmaceutical testing and sample preparation in laboratory environments.
Q2: What standards does the mixer comply with?
A: The multi-tube vortex mixer complies with relevant IEC 61010 laboratory electrical safety standards and applicable GB/T standards for laboratory mixing equipment. Clinical and biological applications follow good laboratory practice and applicable biosafety guidelines. Users should verify tube size compatibility and speed range for their specific applications.
Q3: What is the warranty period for the whole machine and key components?
A: The whole mixer is covered by a 12-month warranty. The motor, controller, base and tube holder are covered, while rubber cups, tube inserts and fuses are consumables or accessories. Damage from improper use, overloading or unauthorized repair is excluded.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation is simple: place tubes in the holder, set speed, and the unit mixes all tubes simultaneously. No professional training is required, but users should follow proper tube securing and safety procedures. We provide an operation manual and remote guidance. Ensure tubes are properly capped or sealed before mixing.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular maintenance required? What is the recommended calibration cycle?
A: Rubber cup and tube holder condition checked periodically. Routine cleaning recommended, particularly for biological or chemical spills. Motor and vibration mechanism inspected per manufacturer schedule. No formal metrological calibration is typically required for a vortex mixer.
Q7: Are supporting consumables universal?
A: Rubber cups, tube inserts and tubes are available from multiple laboratory suppliers, though holder compatibility should be verified. Long-term consumable cost is very low.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes number of tube positions, tube size, speed range, holder type and accessories. Additional tube holders, inserts and accessories can be ordered separately. Custom orders extend delivery lead-time.
Q9: Does the purchase include on-site installation and commissioning service?
A: No installation is required. Standard delivery includes the vortex mixer, tube holder and operation manual. On-site service is not included for this type of benchtop instrument.
Q10: What types of samples are compatible with this equipment?
A: The multi-tube vortex mixer mixes samples in compatible test tubes, microtubes or vials within the holder size and speed specification. Tubes should be properly capped or sealed to prevent spills and contamination. Highly volatile or hazardous samples require appropriate containment. Users should ensure all tubes are properly secured in the holder, use appropriate caps or closures, balance the holder with tubes across positions, avoid overloading beyond the rated capacity, follow decontamination procedures for biological samples, and clean spills promptly. The mixer should be placed on a stable, level surface to prevent movement during operation. This mixer is designed for vigorous agitation and may not be suitable for delicate samples requiring gentle mixing.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.