Introduction
A mini centrifuge is a compact, lightweight laboratory centrifuge designed for small-scale sample separation, and it is used for quick spin-down of samples, for microcentrifuge tube applications, and for applications that require a small footprint and convenience, such as in molecular biology, clinical, and teaching laboratories. In operation, samples in microcentrifuge tubes, typically 0.2 mL, 0.5 mL, 1.5 mL, or 2.0 mL tubes, are placed in the rotor, and the rotor spins at a moderate speed, typically up to about 7,000 to 15,000 revolutions per minute, generating centrifugal force that causes particles, such as cells, precipitates, and droplets, to sediment to the bottom of the tube, and the separated samples can then be used for further analysis. Mini centrifuges are designed for simplicity and ease of use, with a sealed rotor chamber, a timer or pulse function, and interchangeable rotors for different tube types, including strip tubes, and some models include a digital display, and they are small enough to be placed on a bench and are often used at the workstation. They are used in molecular biology for quick spin-down of PCR tubes and microcentrifuge tubes, for collecting liquid droplets from tube walls and caps, for pelleting small samples, for mixing and concentrating samples; in clinical laboratories for small sample preparation; in biochemistry; and in educational laboratories for demonstrations and simple separations. With their compact size and convenience, mini centrifuges are essential for quick and small-scale sample separation.
Mini Centrifuge LMI-T2023
Mini Centrifuge operates at a peak speed of 4000 rpm. Achieves a maximum of 990 × g, facilitating effective separation processes. It employs shock-absorbent material to ensure stable an...
Standards
IEC 61010-2-020:2016-Particular requirements for laboratory centrifuges
Complies with the above standards, but is not limited to them.
Features
1. Mini centrifuge for quick, small-volume sample spinning in laboratory.
2. Compact, lightweight design with fixed-angle rotor for microtubes and PCR strips.
3. Suitable for molecular biology, clinical, educational and point-of-care laboratories.
4. Simple operation with lid-actuated start/stop for convenient quick spins.
5. Includes centrifuge, rotor, adapters and operation manual.
FAQ
Q1: What testing scenarios is this centrifuge mainly applied to?
A: The mini centrifuge is used in molecular biology, clinical diagnostics, educational laboratories, point-of-care settings and research facilities to perform quick, small-volume centrifugation of microtubes, PCR tubes and strip tubes for sample collection, spin-down of reagents and brief separation. It supports quick spin-down of liquid from tube walls and caps, PCR and enzymatic reaction setup, microvolume sample separation, clinical point-of-care testing, educational laboratory use, and field or portable laboratory applications. The compact, simple design provides convenient, fast centrifugation for routine small-volume tasks without the complexity of larger centrifuges. It is essential for molecular biology, clinical, educational and point-of-care laboratories requiring quick, convenient small-volume centrifugation for reagent spin-down, PCR setup, microtube sample collection, brief separation and routine laboratory tasks, where a compact, easy-to-use centrifuge saves time and bench space for daily operations in life science, clinical and educational environments.
Q2: What standards does the centrifuge comply with?
A: The mini centrifuge complies with relevant IEC 61010 laboratory electrical safety standards and applicable GB/T standards. Molecular biology and clinical applications follow good laboratory practice. The rotor is rated for maximum speed and load. Routine verification of speed and function is recommended.
Q3: What is the warranty period for the whole machine and key components?
A: The whole mini centrifuge is covered by a 12-month warranty. The motor, rotor, controller and lid switch are covered, while rotors, adapters and fuses are consumables or accessories. Damage from improper use, rotor overload or unauthorized repair is excluded.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation is very simple: place tubes in the rotor, close the lid to start, and open to stop. No professional training is required, but users should follow proper balancing and safety procedures. We provide an operation manual and remote guidance. Always balance tubes symmetrically in the rotor.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular maintenance required? What is the recommended calibration cycle?
A: Rotor inspection for wear or damage periodically. Lid switch function tested regularly. Routine cleaning recommended. Speed verification if quantitative results are needed. No formal metrological calibration is typically required for this type of quick-spin centrifuge.
Q7: Are supporting consumables universal?
A: Rotors, adapters and microtubes are available from multiple laboratory suppliers, though rotor compatibility should be verified. Long-term consumable cost is very low.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes rotor type, speed, color, adapters and voltage. Additional rotors, adapters and accessories can be ordered separately. Custom orders extend delivery lead-time.
Q9: Does the purchase include on-site installation and commissioning service?
A: No installation is required. The package includes the mini centrifuge, rotor and instruction manual. On-site service is not included for this type of compact instrument.
Q10: What types of samples are compatible with this equipment?
A: The mini centrifuge processes small-volume samples in microtubes (0.2mL, 0.5mL, 1.5mL, 2mL) and PCR strips within the rotor capacity and speed specification. Samples should be properly balanced across the rotor. The mini centrifuge is designed for quick spins, not for high-force or long-duration separations. Users should always balance tubes symmetrically, use appropriate tube adapters, never exceed the rotor speed rating, ensure the lid is properly closed, and follow proper decontamination for biological samples. The compact design is intended for bench-top use and should be placed on a stable, level surface. This centrifuge is not suitable for high-speed or high-volume separations requiring larger instruments.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.