Ultrasonic Homogenizer (Non-contact)

Introduction

A non-contact ultrasonic homogenizer uses ultrasonic energy to process samples without direct probe contact. It is widely used in biological research, pharmaceutical development, and nanomaterial preparation. The system reduces contamination risk during processing. It solves issues associated with probe wear and cross-contamination in traditional ultrasonic systems. By enabling contact-free energy transfer, it improves sample purity and processing flexibility.

Standards

IEC 61010-2-051:2018-Particular requirements for laboratory equipment for mixing and stirring

Complies with the above standards, but is not limited to them.

Features

1. Non-contact ultrasonic homogenizer for probe-less particle size reduction and mixing.

2. Ultrasonic energy is applied through the vessel wall, avoiding sample contamination.

3. Adjustable frequency and power for processing a range of sample volumes.

4. Closed system design reduces aerosol generation and cross-contamination.

5. Suitable for cell disruption, emulsification, dispersion and homogenisation.

FAQ

Q1: What is the non-contact ultrasonic homogenizer mainly used for?

A: It is used to disrupt cells, homogenise suspensions, emulsify mixtures and disperse particles in biological, pharmaceutical and chemical laboratories. The non-contact design avoids direct probe immersion, reducing contamination and sample loss for sensitive applications.

Q2: What standards does the homogenizer comply with?

A: The unit is designed with reference to IEC 61010 electrical safety requirements and relevant GB/T standards for laboratory ultrasonic equipment. Biological applications should follow applicable laboratory and biosafety guidelines. Compliance documentation can be provided on request.

Q3: What is the warranty period for the homogenizer and key components?

A: The complete unit carries a 12-month warranty covering the ultrasonic generator, transducer and controller. Sample vessels and accessories are excluded. Damage from improper operation or unauthorised repair is not covered.

Q4: Is the homogenizer difficult to operate?

A: Operation requires basic training in ultrasonic processing parameters such as power, time and frequency. The manual explains setup and optimisation, and remote guidance is available. Proper vessel positioning is important for effective processing.

Q5: What is the typical lead time for order delivery?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Does the homogenizer require calibration or verification?

A:Power output and processing performance should be verified periodically, typically every 6 to 12 months. The unit is factory tested before delivery. Optional verification service can be arranged.

Q7: Are consumables or spare parts universal?

A: Sample vessels and standard spare parts are available through our channel. No proprietary consumables are required. Provide the model and serial number when ordering.

Q8: Can the homogenizer be customised?

A: Yes, options include different vessel holders, frequency ranges, power levels, 220V or 110V supply and data logging. We confirm each option before order confirmation.

Q9: Is installation and commissioning included?

A: The unit is commissioned by following the manual, including electrical checks and a test run. Remote guidance is available during commissioning. On-site installation can be arranged separately.

Q10: What samples should not be processed in this homogenizer?

A:Flammable solvents, corrosive chemicals and hazardous biological agents require appropriate containment and safety measures. Samples must be compatible with the ultrasonic processing conditions. Follow laboratory safety regulations.