Introduction
An ultra pure water purification system is a water purification system used for the production of the ultra pure water, with the resistivity of 18.2 megohm-centimeters, and it is used in the laboratories, the pharmaceutical, the clinical, the electronics, and the many other applications. The ultra pure water purification system purifies the water by the multiple stages, including the pretreatment, the reverse osmosis, the deionization, and the ultrafiltration or the UV oxidation, and it produces the water with the very low levels of the ions, the organics, and the microorganisms; the ultra pure water purification system consists of the pretreatment filters, a reverse osmosis membrane, the deionization cartridges, the polishing modules, a recirculation system, and the monitoring and the controls, and it provides features such as the resistivity and the TOC monitoring, and the dispensing; the ultra pure water purification system is used for the preparation of the solutions and the reagents, for the analysis, for the cell culture, for the molecular biology, for the pharmaceutical applications, for the electronics, and for many other applications, and it is an essential equipment for the high purity water. Ultra pure water purification systems are used in the laboratories, in the pharmaceutical industry, in the clinical laboratories, in the electronics industry, and for many other applications. With their purification, ultra pure water purification systems are essential for the high purity water production.
Ultrapure Water Purification System T-UWP-L2101
Ultrapure Water Purification System T-UWP-L2100
Ultra-Pure Water Purification System T-UWP-S2110
Ultra-Pure Water Purification System T-UWP-S2109
Ultra-Pure Water Purification System T-UWP-S2108
Ultra-Pure Water Purification System T-UWP-S2106
Ultra-Pure Water Purification System T-UWP-S2107
Ultra-Pure Water Purification System T-UWP-S2105
Ultra-Pure Water Purification System T-UWP-S2104
Ultra-Pure Water Purification System T-UWP-S2101
Ultra-Pure Water Purification System T-UWP-S2102
Ultra-Pure Water Purification System T-UWP-S2103
Ultra-Pure Water Purification System T-UWP-S2100
Standards
GB/T 33087-2016-Specification and test methods for high-purity water for instrumental analysis
ISO 3696:1987-Water for analytical laboratory use-Specification and test methods
GB/T 6682-2008-Water for analytical laboratory use-Specification and test methods
ASTM D5127-13-Standard Guide for Ultra-Pure Water Used in the Electronics and Semiconductor Industries
ASTM D1193-06(2018)-Standard Specification for Reagent Water
Complies with the above standards, but is not limited to them.
Features
1. Ultra-pure water purification system producing Type I reagent-grade water.
2. Multi-stage purification including reverse osmosis, deionization, UV and ultrafiltration.
3. Suitable for analytical laboratories, pharmaceutical manufacturing, electronics and research.
4. Digital monitoring of resistivity, TOC and flow rate for water quality assurance.
5. Includes pretreatment, purification modules, storage tank and dispensing point.
FAQ
Q1: What testing scenarios is this system mainly applied to?
A: The ultra-pure water purification system is used in analytical laboratories, pharmaceutical manufacturing, electronics production, research institutions and healthcare facilities to produce high-purity Type I reagent water for critical applications. It supplies water for HPLC, mass spectrometry, molecular biology, cell culture, analytical chemistry, pharmaceutical formulation, semiconductor manufacturing and medical laboratory testing. The multi-stage purification removes ions, organic compounds, microorganisms, endotoxins and particles to achieve resistivity of 18.2 Mohm-cm and very low TOC. It is essential for laboratories and manufacturing facilities requiring consistent, traceable high-purity water to ensure accurate analytical results, reliable experimental outcomes and compliance with pharmacopoeial and industry standards for water quality in drug production, electronics fabrication and research.
Q2: What standards does the system comply with?
A: The water quality meets ISO 3696 Type I, ASTM D1193 Type I, and pharmacopoeial requirements including USP, EP and ChP for purified water and water for injection where applicable. The system complies with relevant electrical safety standards. Water quality monitoring should be documented for regulated applications.
Q3: What is the warranty period for the whole machine and key components?
A: The whole system is covered by a 12-month warranty. The pumps, control system and UV lamp are covered, while filters, membranes, deionization cartridges and UV lamps are consumables excluded from warranty. Damage from improper feed water quality or unauthorized modification is excluded. Extended service contracts are available.
Q4: Is this device difficult to operate? Is professional training required?
A: Operation requires basic training in system monitoring, filter replacement and water quality testing. We provide operation manuals, maintenance guidance and training. Proper filter replacement schedule, sanitization procedures and quality monitoring are important for consistent water quality.
Q5: What is the typical lead-time for order delivery?
A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Q6: Is regular maintenance required? What is the recommended maintenance cycle?
A: Filter and cartridge replacement follows the manufacturer schedule based on feed water quality and usage, typically every 3-12 months. UV lamp replacement annually or per usage. Sanitization should be performed periodically. Water quality monitoring including resistivity and TOC should be performed regularly, with documentation for regulated facilities.
Q7: Are supporting consumables universal?
A: Filters, membranes, deionization cartridges and UV lamps are available from the manufacturer or authorized distributors, though original consumables are recommended for warranty and performance. Long-term consumable cost is significant and should be budgeted annually.
Q8: Can I customize parameters or supporting accessories?
A: Customization includes production capacity, purification stages, storage tank size, dispensing points and monitoring features. Custom orders require technical specification and extend lead-time. Users should define feed water quality, required water quality and daily usage volume before configuration.
Q9: Does the purchase include on-site installation and commissioning service?
A: Yes, ultra-pure water systems include on-site installation, commissioning, water quality validation and operator training by certified technicians. Site preparation guidance is provided before delivery to ensure feed water, power, drainage and space requirements are met.
Q10: What types of applications are compatible with this equipment?
A: The system produces ultra-pure water for analytical, research, pharmaceutical and electronics applications within the rated capacity. Feed water should meet the manufacturer pretreatment requirements for optimal performance and consumable life. Users should monitor water quality regularly, replace consumables on schedule, perform periodic sanitization, and document all maintenance and quality data for regulated applications. Point-of-use final filters may be needed for specific applications such as endotoxin-sensitive cell culture or particle-free electronics processing.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.