Introduction
Portable Autoclave are made of Stainless steel has a working temperature of 126 ? are designed for general purpose sterilization jobs at dental clinics, nursing homes and hospitals etc. The standard models of these systems are available from 18 to 30 liters of capacities. Each unit constructed with heavy gauge aluminum or stainless steel material (optional). The chamber generates steam pressure 0.14 to 0.16 Mpa under working temperature 126 °C (degrees Celsius). Each system is tested on certain parameters of successful sterilization ensuring safe operation always.
Portable Electric Steam Sterilizer T-SE-S2101
Portable Pressure Steam Sterilizer T-PSS-S2100
Portable Pressure Steam Sterilizer T-PSS-S2101
Portable Electric Steam Sterilizer T-SE-S2100
Portable Steam Sterilizer T-PA-S2401
Portable Steam Sterilizer T-PA-S2402
Portable Steam Sterilizer T-PA-S2300
Portable Steam Sterilizer T-PA-S2301
Portable Steam Sterilizer T-PA-S2400
Portable Steam Sterilizer T-PA-S2100
Portable Steam Sterilizer T-PA-S2101
Portable Steam Sterilizer T-PA-S2200
Portable Steam Sterilizer T-PA-S2201
Portable LPG Heating Steam Sterilizer T-LS-S2902
Portable LPG Heating Steam Sterilizer T-LS-S2901
Standards
IEC 61010-2-040:2020-Particular requirements for sterilizers and washer-disinfectors used to treat medical materials
ISO 17665-1:2006-Sterilization of health-care products-Moist heat-Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices
Complies with the above standards, but is not limited to them.
Features
1. Printer or data-logger option provides cycle records.
2. Quiet operation and heat-insulated panels suit busy work areas.
3. Automatic air removal and drying improve sterilization results.
4. Fast cycles and effective drying improve instrument turnaround.
5. Over-pressure, over-temperature and low-water protection included.
FAQ
What are the main applications of the Portable Pressure Steam Sterilizer?
The Portable Pressure Steam Sterilizer is used to sterilise instruments, glassware, media and waste using pressurised saturated steam. It is essential in microbiology, clinical, dental, pharmaceutical and research laboratories and in central sterile supply.
Which standards and regulations apply to the Portable Pressure Steam Sterilizer?
The unit is designed with reference to applicable pressure-vessel safety rules, IEC 61010 electrical requirements and relevant GB/T standards for sterilizers. Sterilization cycles should follow applicable standards and validated procedures. Compliance documentation can be provided on request.
What warranty comes with the Portable Pressure Steam Sterilizer?
The system is covered for 12 months after shipment, including the main mechanism and electrical controls. Replaceable consumables and routine service items are not part of the warranty. Faults caused by improper installation outside the manual or unauthorised modification are not covered.
Will staff need special training?
The controls are designed for regular laboratory use, so most users become confident after a brief introduction. The manual walks through each step, and common settings can be saved for repeat work. Online or on-site training is available if the site requires it.
What is the typical lead time for order delivery?
Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.
Does the Portable Pressure Steam Sterilizer need calibration or verification?
Regular calibration keeps measurements within the stated accuracy; an annual check is typical, with shorter intervals for heavy or regulated use. Reference standards and procedures are described in the manual. We can quote calibration with certificates.
Are the consumables universal or proprietary?
Common consumables and standard spare parts are available through our service channel and are not locked to proprietary formats. Quote the model and serial number when ordering so the correct items are supplied. Lead time for standard parts is usually short.
Can the Portable Pressure Steam Sterilizer be customised?
Customisation is supported for many installations, including tailored parameters, connections and accessories. Our team reviews the requirement and confirms feasibility and lead time in advance. We avoid committing to options that cannot be delivered reliably.
Is installation and commissioning included?
The unit is delivered ready for set-up, with clear commissioning steps in the manual. We provide remote technical support during installation. For larger or regulated systems, a factory-trained engineer can attend on site on request.
What should be avoided when using the Portable Pressure Steam Sterilizer?
Do not sterilise sealed containers or incompatible materials, and never open the chamber while pressurised. Ensure air removal and drying for effective sterilization. Follow pressure-vessel safety rules.
Tips: For more details, quotes and customized solutions, please contact us anytime. We’re always ready to serve you professionally.