Material Paper Tape Abrasion Tester

Introduction

A material paper tape abrasion tester is an instrument used to measure the abrasion resistance of the coatings, the prints, and the surfaces by the rubbing with the paper tape, and it is used in the coating, the printing, the electronics, and the many other industries. The material paper tape abrasion tester measures the abrasion resistance by the pressing of the paper tape against the specimen under the specified load and the moving of the tape, following the standard test methods, such as the ASTM standards, and it provides the number of the cycles to the exposure of the substrate or the visual assessment of the wear; the material paper tape abrasion tester consists of a tape supply and the take-up system, a test head with the pressure foot, a specimen holder, a cycle counter, and the controls, and it is used for the testing of the abrasion resistance of the coatings on the metal and the plastic, for the testing of the prints and the labels, for the testing of the surface treatments, for the quality control, and for many other applications; the material paper tape abrasion tester is an essential instrument for the coating testing. Material paper tape abrasion testers are used in the coating industry, in the printing industry, in the electronics industry, in the quality control, and for many other applications. With their paper tape abrasion testing, material paper tape abrasion testers are essential for the surface durability assessment.

Paper Abrasion Tester T-S210PAT

Paper abrasion tester is a microprocessor controlled abrasion resistance tester. The non-oiled RCA paper rotational motion provides discriminating effect of the wearing of the testing sam...

Send Inquiry View more

Standards

ISO 4649:2023-Rubber, vulcanized or thermoplastic-Determination of abrasion resistance using a rotating cylindrical drum device (DIN abrasion)

Complies with the above standards, but is not limited to them.

Features

1. Paper tape abrasion tester for evaluating wear resistance of coatings and surfaces.

2. Abrasive paper tape under controlled load provides reproducible surface wear.

3. Suitable for paints, coatings, plastics, anodized surfaces and decorative materials.

4. Includes tape supply, load mechanism, specimen holder and cycle counter.

5. Supports quality control and material comparison for surface durability assessment.

FAQ

Q1: What testing scenarios is this instrument mainly applied to?

A: The paper tape abrasion tester is used in coating manufacturing, surface treatment industries, material laboratories and quality control departments to evaluate the wear resistance of paints, varnishes, coatings, plastics, anodized aluminum, decorative laminates and other surface finishes. It supports product quality assessment, coating formulation comparison, durability prediction and compliance with industry specifications. The test uses a standardized abrasive paper tape moving across the specimen surface under a controlled load, simulating everyday wear such as wiping, rubbing and contact abrasion. It is particularly useful for evaluating interior coatings, consumer electronics finishes, automotive trim and architectural surfaces where surface appearance and durability affect product quality and customer satisfaction.

Q2: What standards does the instrument comply with?

A: The test method follows ASTM D4158 for abrasion resistance of coatings, ISO 1518 for scratch resistance, and relevant GB/T standards for coating abrasion testing. The instrument complies with relevant laboratory electrical safety standards. Abrasive tape grade and load should follow the applicable standard specification.

Q3: What is the warranty period for the whole machine and key components?

A: The whole tester is covered by a 12-month warranty. The drive system, load mechanism and counter are covered, while abrasive tape, specimen holders and weights are consumables or accessories excluded from warranty. Damage from overloading or unauthorized repair is excluded.

Q4: Is this device difficult to operate? Is professional training required?

A: Operation requires basic training in specimen preparation, load setting and result evaluation. We provide an operation manual and remote guidance. Proper specimen mounting, tape selection and wear assessment method are important for meaningful comparison.

Q5: What is the typical lead-time for order delivery?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is regular calibration required? What is the recommended calibration cycle?

A: Load verification with calibrated weights is recommended every 6-12 months. Tape speed and cycle counter can be checked periodically. Abrasive tape should be replaced per the standard method. Full method verification with a reference coating is recommended for accredited laboratories.

Q7: Are supporting consumables universal?

A: Abrasive tape is available from multiple suppliers, though grade should match the standard. Specimen holders may be model-specific. Long-term consumable cost is low to moderate.

Q8: Can I customize parameters or supporting accessories?

A: Customization includes load range, tape type and specimen holder configuration. Additional abrasive tape and holders can be ordered separately. Custom orders extend delivery lead-time.

Q9: Does the purchase include on-site installation and commissioning service?

A: Standard delivery includes the tester, holders and accessories with an operation manual. Remote commissioning guidance is provided. On-site service is not included for standard orders.

Q10: What types of samples are compatible with this equipment?

A: The tester handles flat or slightly curved surfaces within the specimen size and load capacity. Highly textured or very soft surfaces may require special consideration. Users should select the appropriate abrasive tape grade, load and number of cycles based on the coating type and applicable standard, and define a clear wear endpoint criterion such as coating breakthrough or gloss change for consistent result evaluation.