Material Hydraulic Servo Universal Testing Machine

Introduction

A material hydraulic servo universal testing machine is a universal testing machine with the hydraulic drive and the servo control, used for the tensile, the compression, the bending, and the other mechanical tests of the materials, and it is used in the materials, the metals, the construction, the aerospace, and the many other industries. The hydraulic servo universal testing machine applies the load to the specimen by the hydraulic actuator, with the servo control providing the precise and the controlled loading, and it measures the force and the deformation, providing the stress-strain curve and the mechanical properties, such as the strength, the modulus, and the elongation; the material hydraulic servo universal testing machine consists of a loading frame, a hydraulic power unit, a servo valve, the load cell and the extensometer, the grips and the fixtures, and a control and a data analysis system, and it provides features such as the various test modes and the programmable loading; the material hydraulic servo universal testing machine is used for the tensile testing of the metals, the plastics, and the composites, for the compression testing, for the bending testing, for the fatigue testing, for the quality control, for the research, and for many other applications, and it is available in various capacities, from the small models to the large models; the material hydraulic servo universal testing machine is an essential equipment for the mechanical testing. Material hydraulic servo universal testing machines are used in the materials industry, in the metals industry, in the construction, in the research, and for many other applications. With their servo control, material hydraulic servo universal testing machines are essential for the precise mechanical testing.

Hydraulic Servo Universal Testing Machine T-S210HSU

Hydraulic servo universal testing machine is a floor mounted system with single test space for tensile, compression and flexure testing. The unit is digitally controlled with a PC softwar...

Send Inquiry View more

Hydraulic Servo Universal Testing Machine T-S211HSU

Hydraulic Servo Universal Testing Machine is designed for tension, compression, bending, and flexural tests on metal and non-metal materials. The unit is digitally controlled with a PC so...

Send Inquiry View more

Standards

ISO 7500-1:2018-Metallic materials-Calibration and verification of static uniaxial testing machines-Part 1: Tension/compression testing machines

ISO 9513:2012-Metallic materials-Calibration of extensometer systems used in uniaxial testing

ISO 6892-1:2019-Metallic materials-Tensile testing-Part 1: Method of test at room temperature

ASTM E8/E8M-Standard Test Methods for Tension Testing of Metallic Materials

GB/T 228.1-2021-Metallic materials-Tensile testing-Part 1: Method of test at room temperature

Complies with the above standards, but is not limited to them.

Features

1. Hydraulic servo universal testing machine for high-force material mechanical testing.

2. Closed-loop servo control provides precise load, displacement and strain rate regulation.

3. High load capacity suitable for metals, concrete, structural components and fasteners.

4. Supports tensile, compression, bending, shear and fatigue testing configurations.

5. Includes load cell, extensometer, grips and software for data acquisition and analysis.

FAQ

Q1: What testing scenarios is this instrument mainly applied to?

A: The hydraulic servo universal testing machine is used in material testing laboratories, structural engineering research, manufacturing quality control and certification bodies to perform high-force mechanical testing on metals, alloys, concrete, structural components, fasteners, welds and industrial materials. It supports tensile strength, yield strength, elongation, compression, bending, shear and fatigue testing according to international and national standards. The high load capacity and servo control make it suitable for testing high-strength materials and full-size components where electromechanical machines lack sufficient force. It is essential for structural steel certification, concrete quality assessment, automotive component validation and aerospace material qualification where accurate mechanical property data is required for design, safety and regulatory compliance.

Q2: What standards does the instrument comply with?

A: The machine complies with ISO 7500-1 for static calibration of testing machines, ASTM E4 for force verification, JJG 139 and relevant GB/T standards for universal testing machines. Test methods follow ISO 6892 for metals, ISO 6721 for plastics, ASTM C39 for concrete and applicable GB/T standards. The instrument complies with relevant safety standards for high-force equipment.

Q3: What is the warranty period for the whole machine and key components?

A: The whole machine is covered by a 12-month warranty. The load frame, hydraulic system, servo valve and controller are covered, while grips, fixtures and seals are consumables or accessories excluded from warranty. Damage from overloading, improper hydraulic maintenance or unauthorized repair is excluded. Extended service contracts are available.

Q4: Is this device difficult to operate? Is professional training required?

A: Operation requires trained personnel familiar with material testing methods, machine safety and hydraulic system maintenance. We provide structured training, operation manuals and application support. Proper specimen gripping, extensometer attachment and test parameter setup are critical for accurate results and operator safety.

Q5: What is the typical lead-time for order delivery?

A: Standard models require 7-30 working days. In-stock units can ship within 3-7 working days. Custom configurations or large built-to-order systems may require additional time, and we confirm the exact schedule before order confirmation.

Q6: Is regular calibration required? What is the recommended calibration cycle?

A: Load cell calibration with certified weights or load cell is required annually or per ISO 7500-1. Extensometer calibration follows ISO 9513. Hydraulic system maintenance including oil and filter changes should follow the manufacturer schedule. Daily pre-test checks of grips, safety interlocks and hydraulic pressure are recommended.

Q7: Are supporting consumables universal?

A: Grips, fixtures and extensometers are available from the manufacturer or authorized distributors, though compatibility should be verified. Hydraulic oil and filters are standard. Long-term consumable and service cost is moderate to high for high-force systems.

Q8: Can I customize parameters or supporting accessories?

A: Customization includes load capacity, test space, grip configuration, extensometer type and software modules. Custom orders require technical specification exchange and extend lead-time. Users should define test methods, specimen types and required force range before configuration.

Q9: Does the purchase include on-site installation and commissioning service?

A: Yes, hydraulic servo universal testing machines include on-site installation, commissioning, calibration and operator training by certified engineers. Site preparation guidance is provided before delivery to ensure the foundation, power and space requirements are met.

Q10: What types of samples are compatible with this equipment?

A: The machine tests solid materials and components within the load capacity and test space. Specimen geometry should match the selected grips and fixtures. Very large or heavy specimens may require special fixtures. Users should verify load capacity, test speed range and grip compatibility for each application, and ensure proper safety enclosure and interlock engagement during high-force testing to protect operators from specimen fracture hazards.